80D Vishay Sprague Aluminum Capacitors + 85 C, Snap-In FEATURES High ripple capability Molded cover available in 2 and 3 terminal design with standoffs Fig.1 Component Outlines QUICK REFERENCE DATA RIPPLE CURRENT MULTIPLIERS DESCRIPTION VALUE TEMPERATURE Nominal case size 1.38 x 3.15 (35.0 x 80.0) D x L in inches (mm) AMBIENT TEMPERATURE MULTIPLIERS Operating temperature - 40 C to + 85 C - 55 C 2.0 Rated capacitance - 65 C 1.7 82 F to 56 000 F range, C R - 75 C 1.4 - 85 C 1.0 Tolerance on C - 10 %, + 30 % R Rated voltage range, U 6.3 WVDC to 250 WVDC R FREQUENCY (Hz) Snap mount or 2 and 3 Termination terminal straight leads WVDC 50 TO 60 300 TO 1000 1000 AND UP 2000 h: CAP 15 % from initial 0 to 49 0.85 1.10 1.15 Life validation test measurement. ESR 1.5 x initial 50 to 199 0.83 1.15 1.20 at 85C specified limit. DCL initial specified 200 to 250 0.80 1.30 1.40 limit 500 h: CAP 15 % from initial ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) measurement. ESR 1.3 x initial Shelf life at 85C specified limit. DCL 2 x initial Nominal 0.984 1.18 1.38 specified limit Diameter (25.0) (30.0) (35.0) I = K cv Typical DC leakage current K = 4.0 at + 25 C 8.0 10.0 12.0 ESL (nH) I in A, C in F, V in Volts DIMENSIONS in inches (millimeters) DIAMETER LENGTH DIAMETER LENGTH CASE CASE CODE CODE D + 0.039 - 0 (+1.0 - 0) L 0.079 (2.0) D + 0.039 - 0 (+ 1.0 - 0) L 0.079 (2.0) JA 1.00 (25.0) 1.00 (25.0) KD 1.18 (30.0) 1.57 (40.0) JB 1.00 (25.0) 1.18 (30.0) KE 1.18 (30.0) 2.00 (50.0) JC 1.00 (25.0) 1.38 (35.0) MB 1.38 (35.0) 1.18 (30.0) JD 1.00 (25.0) 1.57 (40.0) MC 1.38 (35.0) 1.38 (35.0) JE 1.00 (25.0) 2.00 (50.0) MD 1.38 (35.0) 1.57 (40.0) KA 1.18 (30.0) 1.00 (25.0) ME 1.38 (35.0) 2.00 (50.0) KB 1.18 (30.0) 1.18 (30.0) MF 1.38 (35.0) 2.50 (63.0) KC 1.18 (30.0) 1.38 (35.0) MG 1.38 (35.0) 3.18 (80.0) www.vishay.com For technical questions, contact: aluminumcaps4 vishay.com Document Number: 42060 258 Revision: 05-Feb-0980D Aluminum Capacitors Vishay Sprague + 85 C, Snap-In DIMENSIONS in inches (millimeters) CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS DIAMETER STYLE A STYLE B D CASE CODE B R C R 1.00 (25.0) J 0.093 (2.4) 0.301 (7.6) 140 N/A (1) 1.18 (30.0) K 0.125 (2.3) 0.363 (9.2) 120 0.391 (9.9) (1) 1.38 (35.0) M 0.125 (3.2) 0.458 (11.6) 120 0.458 (11.6) Notes (1) Pin-type molded cover available on 80D/82D through 450 V. For 81D, only up through 250 V. DIMENSIONAL AND AVAILABLE FORMS Style A Style B Style D Document Number: 42060 For technical questions, contact: aluminumcaps4 vishay.com www.vishay.com Revision: 05-Feb-09 259