860-11503 Vishay

Model 860 www.vishay.com Vishay Spectrol 13 1 / (46 mm) Ten Turn Wirewound Potentiometer, 16 Bushing Mount FEATURES Gangable up to 2 sections Large range of ohmic values: 20 to 200 k Extra taps available upon request Ideally suits for all industry applications QUICK REFERENCE DATA Sensor type ROTATIONAL, multi turn wirewound Output type Output by turrets Market appliance Industrial 13 Dimensions 1 / (46 mm) 16 ELECTRICAL SPECIFICATIONS PARAMETER Total resistance Standard range 20 to 200 k Special up to 500 k Tolerance: STANDARD SPECIAL 200 and above 3 % 1 % Below 200 5 % 3 % Linearity (independent) 0.25 % standard 20 to 50 0.15 % 50 to 200 0.10 % 200 to 5 k 0.05 % 5 k and above 0.025 % Noise 100 ENR Electrical angle 3600 + 4 - 0 Power rating 8.0 W at 40 C derated to zero at 125 C Insulation resistance 1000 M minimum 500 V DC Dielectric strength 1000 V , 60 Hz RMS Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater End Voltage 0.5 % of total applied voltage maximum Phasing CCW end points sect. 2 phased to sect 1 within 1 Taps (extra) Available as special standard tolerance 1 ORDERING INFORMATION/DESIGNATION Model 860 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order, please state: 860 B 1 20K BO10 MODEL BUSHING MOUNT NUMBER OF SECTIONS RESISTANCE OF EACH SECTION PACKAGING From 1 up to 2 sections Beginning with the section nearest Box of 10 pieces (maximum) the mounting end SAP PART NUMBERING GUIDELINES 860 B 1 203 B10 NUMBER OF OHMIC VALUE OF MODEL STYLE PACKAGING o SECTIONS SECTION N 1 Revision: 10-Apr-13 Document Number: 57093 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 860 www.vishay.com Vishay Spectrol DIMENSIONS in inches (millimeters) MODEL: 860B/860-1 MTG. FACE 2 0.015 0.031 0.812 2.000 (20.62) (50.80) 0.250 MIN. 0.015 (6.35) 0.312 (7.92) 0.062 (1.57) 0.030 MAX. (0.76) 0.015 0.010 0.218 (0.25) (5.54) 3 2 1 3 / - 32 UNEF - 2A 8 0.015 1.812 (46.02) 0.562 (14.27) 0.062 + 0.0000 (1.57) - 0.0003 0.2497 0.125 (6.34) (3.18) + 0.0000 - 0.0020 0.4062 MTG. (10.32) 2 CW ADD 1.787 0.010 (45.39) FOR 2 GANG UNIT 1 1 3 TOLERANCES: OTHERWISE NOTED. SCHEMATIC DECIMALS 0.005 ANGLES 2 MECHANICAL SPECIFICATIONS PARAMETER Rotation 3600 + 4 - 0 Bearing type Sleeve bearing Torque (maximums): STARTING RUNNING Section 1 1.75 oz. - in (126.02 g - cm) 1.26 oz. - in (90.01 g - cm) Section 2 2.55 oz. - in (183.62 g - cm) 1.85 oz. - in (133.21 g - cm) Runouts (maximums) Shaft (TIR) 0.002 (0.05 cm) Pilot dia (TIR) 0.002 (0.05 cm) Lateral (TIR) 0.005 (0.13 cm) Shaft end play 0.002 min. 0.010 max. (0.05 cm to 0.25 cm) Shaft radial play 0.003 max. (0.08 cm) Weight (maximums) Single section 4.5 oz. (127.58 g) Additional section 4.0 oz. (113.40 g) Stop strength 750 oz. - in (static) (54.01 kg - cm) 2 sections maximum ears of clamp band between Ganging sections positioned 45, 10 CCW from terminal center line 2 Moment inertia 15.0 g - cm maximum Revision: 10-Apr-13 Document Number: 57093 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000