ACAS 0612 - Professional www.vishay.com Vishay Beyschlag Professional Thin Film Chip Resistor Array FEATURES Advanced thin film technology Two pairs or four equal resistor values TCR down to 25 ppm/K Tolerance down to 0.5 % Pure Sn termination on Ni barrier layer Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS The ACAS 0612 thin film chip resistor arrays combine the Voltage divider proven reliability of professional thin film chip resistor Feedback circuits products with the advantages of chip resistor arrays. A small package enables the design of high density circuits in Signal conditioning combination with reduction of assembly costs. Four equal resistor values or two pairs are available. TECHNICAL SPECIFICATIONS DESCRIPTION ACAS 0612 EIA size 0612 Metric size RR1632M Configuration, isolated 4 x 0603 Design: All equal AE Two pairs TP (1) Resistance values 47 to 221 k (2) Absolute tolerance 1 % 0.5 % (2) Absolute temperature coefficient 50 ppm/K 25 ppm/K Max. resistance ratio R /R 1:10 min. max. Rated dissipation: P 70 Element 0.1 W Package, 4 x 0603 0.3 W Operating voltage 75 V Permissibe film temperature 125 C Operating temperature range - 55 C to 125 C Insulation voltage (U ) against ambient and between isolated ins 75 V resistors, continuous Notes (1) Resistance values to be selected from E24 E192. (2) For specified TCR tracking, tolerance matching and even tighter absolute tolerance and TCR please refer to data sheet ACAS 0612 - Precision available on our web site at www.vishay.com/doc 28751. Revision: 13-Dec-12 Document Number: 28754 1 For technical questions, contact: thinfilmarray vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 ACAS 0612 - Professional www.vishay.com Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. CIRCUITS R R R R 1 2 3 4 ACAS 0612 DESIGN ACAS 0612 AE R = R = R = R 1 2 3 4 TP R = R < R = R 1 4 2 3 PART NUMBER AND PRODUCT DESCRIPTION Part Number: ACASA110012200P500 A C A S A 1 100 1202 0P050 MODEL/ ACCURACY (1) (1) TERMINAL SIZE RESISTANCE RESISTANCE PACKAGING SPECIAL (2) SIZE GRADE ACA S = Convex A = 0612 3 digit TCR and 3 digit P1 00 = Standard square resistance tolerance resistance P5 value R , R 1 value R , R 1 4 2 3 1 digit 2 1 digit multiplier multiplier 3 MULTIPLIER -1 MULTIPLIER 9 = *10 -1 0 9 = *10 0 = *10 0 1 0 = *10 1 = *10 1 2 1 = *10 2 = *10 2 3 2 = *10 3 = *10 3 3 = *10 Product Description: ACAS 0612 110R 1 220R P5 ACA S 0612 110R 1 220R P5 RESISTANCE ACCURACY RESISTANCE MODEL/SIZE TERMINATION SIZE PACKAGING (1) (2) (1) R , R GRADE R , R 1 4 2 3 ACA = Chip S = Convex 0612 110R = 110 TCR and 220R = 220 P1 Array square 1K1 = 1.1 k tolerance 1K1 = 1.1 k P5 22K1 = 22.1 k 1 22K1 = 22.1 k 2 3 Notes Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. (1) R = R R = R . 1 4 2 3 (2) Please refer to the table TEMPERATURE COEFFICIENT AND RESISTANCE RANGE, see next page. (3) Please refer to the table PACKAGING, see next page. Revision: 13-Dec-12 Document Number: 28754 2 For technical questions, contact: thinfilmarray vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000
