Not Recommended for New Design, Use New MKP385 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES l W l W 7.5 mm bent back pitch, 10 mm and 15 mm lead pitch. Low h h h contact resistance. Low loss dielectric. Small dimensions for high density packaging. Supplied loose in box and taped on F l t reel. (1) F d d t H t RoHS compliant product. P 10 15 ENCAPSULATION Dimensions in mm (1) F - F < 0.3 mm Flame retardant plastic case and epoxy resin F = 7.5 + 0.6/- 0.1 mm UL-class 94 V-0 APPLICATIONS CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 Where steep pulses occur e.g. SMPS (switch mode power 55/110/56 supplies). Electronic lighting e.g. ballast. Motor control circuits. CAPACITANCE RANGE (E24 SERIES) 0.00047 to 0.033 F REFERENCE SPECIFICATIONS IEC 60384-17 CAPACITANCE TOLERANCE 5 % MARKING C-value tolerance rated voltage code for dielectric material LEADS manufacturer location manufacturer s type manufacturers Tinned wire logo year and week RATED (DC) TEMPERATURE DIELECTRIC 85C Polypropylene film RATED (AC) TEMPERATURE ELECTRODES 85 C Metallized MAXIMUM APPLICATION TEMPERATURE 110 C CONSTRUCTION Internal serial construction MAXIMUM OPERATING TEMPERATURE FOR LIMITED TIME RATED (DC) VOLTAGE 125 C 1600 V, 2000 V PERFORMANCE GRADE RATED (AC) VOLTAGE Grade 1 (long life) 550 V, 700 V STABILITY GRADE RATED PEAK-TO-PEAK VOLTAGE Grade 2 1600 V, 2000 V DETAIL SPECIFICATION For more detailed data and test requirements contact: dc-film vishay.com Document Number: 28152 For technical questions, contact: dc-film vishay.com www.vishay.com Revision: 19-Mar-13 159 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not Recommended for New Design, Use New MKP385 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER MULTIPLIER TYPE AND PITCHES (nF) 10.0/7.5 mm 0.1 2 15.0/7.5 mm CAPACITANCE 13 385 10.0 mm (numerically) 10 4 15.0 mm 100 5 Example: 104 10 x 10 100 nF BFC2 385 XX YY Y (1) 2222 385 XX YY Y (1) old ordering number PREFERRED TYPES TYPE PACKAGING LEAD CONFIGURATION C-TOL. 1600 V 2000 V lead length 3.5 + 1/- 0.5 mm Loose in box 5 % 00506080 or 3.5 0.3 mm H = 18.5 mm P = 12.7 mm 0 (1) Taped on reel 5 % 02526282 reel diameter = 500 mm 385 Taped on reel (bent H = 16.0 mm P = 15.0 mm 0 5 % 03536383 (1) back to 7.5 mm) reel diameter = 500 mm (1) Ammopack H = 18.5 mm P = 12.7 mm 5 % 06566686 0 Ammopack (bent H = 16.0 mm P = 15.0 mm 5 % 08586888 0 (1) back to 7.5 mm) ON REQUEST Loose in box lead length 5.0 1.0 mm 5 % 01 51 61 81 Loose in box lead length 25.0 2.0 mm 5 % 04 54 64 84 385 Taped on reel (bent H = 16.0 mm P = 15.0 mm 0 5 % 05556585 (1) back to 7.5 mm) reel diameter = 356 mm Loose in box lead length 3.2 + 0.3/- 0.6 mm 5 % 07 57 67 87 Note (1) For detailed tape specifications refer to Packaging Information www.vishay.com/doc 28139 or end of catalog SPECIFIC REFERENCE DATA (1600 Vdc) DESCRIPTION VALUE at 10 kHz at 100 kHz Tangent of loss angle: -4 -4 5 x 10 15 x 10 Rated voltage pulse slope (dU/d ) t R P = 10 mm and 10 mm bent back to 7.5 mm > 4000 V/s P = 15 mm and 15 mm bent back to 7.5 mm > 2000 V/s R between leads, for C 1 F at 500 V 1 min 100 000 M R between leads and case 500 V 1 min 30 000 M Ionization (AC) voltage (typical value) at 20 pC peak discharge > 600 V Withstanding (DC) voltage (cut off current 10 mA) rise time 100 V/s 2560 V 1 min Withstanding (DC) voltage between leads and case 2840 V 1 min Maximum application temperature 110 C www.vishay.com For technical questions, contact: dc-film vishay.com Document Number: 28152 160 Revision: 19-Mar-13 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000