BFW15M0JF08 Vishay

B, T www.vishay.com Vishay Dale Carbon Film Resistors, General Purpose, High Voltage FEATURES Ratings to 10 W, 40 kV Available with either radial lugs or axial leads Available Epoxy/enamel coated, with additional Mylar heat shrink sleeve 0.002 (0.051 mm) thick 20 % tolerance standard, tolerances of 15 %, 10 % and 5 % available See models D and G for special purpose high Available voltage carbon film resistors Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM WORKING RESISTANCE (3) TOLERANCE (1) (2) GLOBAL MODEL P VOLTAGE RANGE STYLE 25 C % W V BAEW 0.5 2.5K 50K to 500M 5, 10, 15, 20 2 BAKW 1 5K 100K to 500M 5, 10, 15, 20 2 BBF 1 3.5K 50K to 500M 5, 10, 15, 20 1 BBFW 1 3.5K 50K to 500M 5, 10, 15, 20 2 BBM 2 7.5K 50K to 500M 5, 10, 15, 20 1 BBMW 2 7.5K 50K to 500M 5, 10, 15, 20 2 BBR 3 15K 100K to 500M 5, 10, 15, 20 1 BBRW 3 15K 100K to 500M 5, 10, 15, 20 2 BBV 5 30K 200K to 500M 5, 10, 15, 20 1 BFQ 4 15K 100K to 500M 5, 10, 15, 20 1 BFT 6 25K 200K to 500M 5, 10, 15, 20 1 BFW 10 40K 400K to 500M 5, 10, 15, 20 1 TAFW 1 5K 1M to 500M 5, 10, 15, 20 3 TAKW 1.5 7.5K 1M to 500M 5, 10, 15, 20 3 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) All resistance values are calibrated at 100 V -calibration at other voltages available on request. Contact factory for availability of values DC outside the listed range. (3) 20 % standard, 5 %, 10 %, and 15 % are available. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: BAEW2M50LF08 (preferred part numbering format) B AE2W M500LF 8 GLOBAL RESISTANCE TOLERANCE PACKAGING SPECIAL MODEL VALUE CODE (3 or 4 digits) K = k J = 5 % E08 = Lead (Pb)-free, Blank = Standard (see Standard Electrical M = M K = 10 % foam (B series only) (Dash Number) Specifications table) 50K0 = 50 k L = 15 % E22 = Lead (Pb)-free, (up to 3 digits) 1M00 = 1 M M = 20 % bulk (TAFW, TAKW only) From 1 to 999 500M = 500 M F08 = Tin/lead, foam as applicable (B series only) B22 = Tin/lead, bulk (TAFW, TAKW only) Historical Part Number example: BAEW 2M50 15 % (will continue to be accepted) BAEW 2M50 15 % F08 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc 31544). Revison: 07-Jul-15 Document Number: 31039 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000B, T www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A Style 1 Style 2 Dia. 0.093 (2.4) 2.0 (50.8) 0.719 A Screw (18.3) 6-32 B B 0.040 (1.0) Dia. 0.032 (0.8) Style 3 A 1.5 0.125 (38.1 3.2) B GLOBAL MODEL STYLE A B BAEW 2 0.75 (19.05) 0.250 (6.35) BAKW 2 1.50 (38.10) 0.250 (6.35) BBF 1 1.00 (25.40) 0.313 (7.95) BBFW 2 1.00 (25.40) 0.313 (7.95) BBM 1 1.75 (44.45) 0.313 (7.95) BBMW 2 1.75 (44.45) 0.313 (7.95) BBR 1 3.00 (76.20) 0.313 (7.95) BBRW 2 3.00 (76.20) 0.313 (7.95) BBV 1 5.50 (139.70) 0.313 (7.95) BFQ 1 2.50 (63.50) 0.563 (14.30) BFT 1 4.00 (101.60) 0.563 (14.30) BFW 1 6.50 (165.10) 0.563 (14.30) TAFW 3 1.05 0.05 (26.70 1.30) 0.275 0.020 (7.00 0.50) TAKW 3 1.55 0.05 (39.40 1.30) 0.275 0.020 (7.00 0.50) Note Models B axial leads are 20 AWG tinned copper. All other dimensional tolerances for styles 1 and 2, unless otherwise specified are 0.016 0.406 mm or 1 %, whichever is greater. DERATING 120 100 80 60 40 20 0 020 40 60 80 100 120 140 160 180 25 AMBIENT TEMPERATURE IN C MARKING - DALE - Model - Value - Tolerance - Date code Revison: 07-Jul-15 Document Number: 31039 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 R A T E D P O W E R I N %