CDR-MIL-PRF-55681 www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type CDR FEATURES Military qualified products Available Federal stock control number, CAGE CODE 2770A Available High reliability tested per MIL-PRF-55681 Tin / lead termination codes Z and U Lead (Pb)-free termination codes W, Y, M Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS Avionic systems Sonar systems Satellite systems Missiles applications Geographical information systems Global positioning systems ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Aging Rate: Capacitance Range: 1.0 pF to 470 nF BP: 0 % maximum per decade BX: 1 % maximum per decade Voltage Range: 50 V to 100 V DC DC Insulation Resistance (IR): Temperature Coefficient of Capacitance (TCC): at +25 C and rated voltage 100 000 M minimum or BP: 0 ppm/C 30 ppm/C from -55 C to +125 C, 1000 F, whichever is less with 0 V applied DC BX: 15 % from -55 C to +125 C, Dielectric Strength Test: with 0 V applied DC performed per method 103 of EIA-198-2-E. BX: +15 %, -25 % from -55 C to +125 C, Applied test voltages: with 100 % rated V applied DC 100 V -rated: 250 % of rated voltage DC Dissipation Factor (DF): BP: 0.15 % maximum BX: 2.50 % maximum Test frequency: 1 MHz 50 kHz for BP capacitors 1000 pF and for BX capacitors 100 pF All other BP and BX at 1 kHz 50 Hz Revision: 14-Aug-15 Document Number: 45026 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CDR-MIL-PRF-55681 www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC STYLE (CASE) (V) MINIMUM MAXIMUM BP CDR01 (0805) 100 10 pF 180 pF BX CDR01 (0805) 100 120 pF 4.7 nF BP CDR02 (1805) 100 220 pF 270 pF BX CDR02 (1805) 100 3.9 nF 22 nF BP CDR03 (1808) 100 330 pF 1.0 nF BX CDR03 (1808) 100 12 nF 68 nF BP CDR04 (1812) 100 1.2 nF 3.3 nF BX CDR04 (1812) 100 39 nF 180 nF BX CDR06 (2225) 50 390 nF 470 nF BP CDR31 (0805) 100 1.0 pF 680 pF BX CDR31 (0805) 100 470 pF 18 nF BP CDR32 (1206) 100 1.0 pF 2.2 nF BX CDR32 (1206) 100 4.7 nF 39 nF BP CDR33 (1210) 100 1.0 nF 3.3 nF BX CDR33 (1210) 100 15 nF 100 nF BP CDR34 (1812) 100 2.2 nF 10 nF BX CDR34 (1812) 100 27 nF 180 nF BP CDR35 (1825) 100 4.7 nF 22 nF BX CDR35 (1825) 100 56 nF 470 nF Note Detail ratings see selection chart ORDERING INFORMATION - MILITARY CDR31 BX 102 A K Y S A T MILITARY DIELECTRIC CAPACITANCE DC CAPACITANCE TERMINATION FAILURE MARKING PACKAGING (2) STYLE NOMINAL VOLTAGE TOLERANCE RATE (1) CODE RATING CDR01 BP and BX Expressed in A = 50 V C = 0.25 pF M = silver palladium M = 1.0 % A = CDR02 picofarads (pF). B = 100 V D = 0.5 pF Y = Ni barrier with unmarked P = 0.1 % CDR03 The first two F = 1 % 100 % tin R = 0.01 % CDR04 digits are J = 5 % W = Ni barrier with S = 0.001 % CDR06 significant, the K = 10 % 100 % tin Consult CDR31 third is a M = 20 % Z = Ni barrier with factory for CDR32 multiplier. tin / lead plate failure rate CDR33 Examples: min. 4 % lead status CDR34 102 = 1000 pF U = hot solder CDR35 1R8 = 1.8 pF dipped T = 7 reel / plastic tape (3) (min. of 4 % lead) J = 7 reel (low quantity) C = 7 reel / paper tape R = 11 1/4 / 13 reel / plastic tape P = 11 1/4 / 13 reel / paper tape B = bulk Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc vishay.com (2) Available tolerances please see rating chart (3) MIL-PRF-55681 U termination part number have increased dimensions Revision: 14-Aug-15 Document Number: 45026 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000