CH
www.vishay.com
Vishay Sfernice
High Frequency 50 GHz Thin Film Chip Resistor
FEATURES
Operating frequency 50 GHz
Thin film microwave resistors
Flip chip, wraparound or one face termination
Small size, down to 20 mils by 16 mils
Edged trimmed block resistors
Pure alumina substrate (99.5 %)
click logo to get started
Ohmic range: 10R to 500R
DESIGN SUPPORT TOOLS
Design kits available
-24
Models Small internal reactance (LC down to 1 10 )
Available
Tolerance 1 %, 2 %, 5 %, 10 %
Those miniaturized components are designed in such a way
TCR: 100 ppm/C in (-55 C, +155 C) temperature range
that their internal reactance is very small. When correctly
mounted and utilized, they function as almost pure resistors
Material categorization: for definitions of compliance
on a very large range of frequency, up to 50 GHz.
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE RATED POWER LIMITING ELEMENT TEMPERATURE
TOLERANCE
MODEL SIZE RANGE Pn VOLTAGE COEFFICIENT
%
W V ppm/C
CH02016 02016 10 to 500 0.030 30 2, 5, 10 100
CH0402 0402 10 to 500 0.050 37 1, 2, 5, 10 100
CH0603 0603 10 to 500 0.125 50 1. 2, 5, 10 100
DIMENSIONS in millimeters (inches)
CH02016 F / CH02016 P / CH0402 N / CH0402 G /
CH0402 F / CH0603 F
CH0402 P / CH0603 P CH0603 N / CH0603 G
DIMENSIONS
CASE SIZE
D
A B C F G
MODEL / E when applicable
0.10 ( 0.004) 0.10 ( 0.004) 0.127 ( 0.005) 0.050 ( 0.002) 0.050 ( 0.002)
TERMINATION
MIN. MAX.
CH02016 F 0.110 0.150
(1)
0.480 (0.020) 0.390 (0.016) 0.420 (0.016) 0.260 (0.010) 0.300 (0.012)
CH02016 P (0.004) (0.006)
CH0402 F
0.150 0.350
CH0402 N 1.000 (0.040) 0.600 (0.023) 0.500 (0.020) n/a n/a
(0.006) (0.014)
CH0402 G
0.110 0.150
CH0402 P 1.200 (0.047) 0.600 (0.023) 0.500 (0.020) 0.320 (0.013) 0.880 (0.035)
(0.004) (0.006)
CH0603 F
0.250 0.510
CH0603 N 1.520 (0.060) 0.750 (0.030) 0.500 (0.020) n/a n/a
(0.010) (0.020)
CH0603 G
0.235 0.275
CH0603 P 1.720 (0.068) 0.750 (0.030) 0.500 (0.020) 0.660 (0.026) 1.355 (0.053)
(0.009) (0.011)
Note
(1)
0.070 ( 0.003)
Revision: 08-Feb-18 Document Number: 53014
1
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CH
www.vishay.com
Vishay Sfernice
TOLERANCE VS. OHMIC VALUES
Ohmic range 10 R < 50 50 R < 100 100 R 500
(1)
Tolerance 5 %, 10 % 2 %, 5 %, 10 % 1 %, 2 %, 5 %, 10 %
Note
(1)
1 % tolerance not applicable for case 02016
LAND PATTERN FOR F 'FLIP CHIP' TERMINATIONS in millimeters (inches)
G
min.
X
max.
Z
max.
CHIP SIZE Z X G
max. max. min.
02016 0.53 (0.021) 0.44 (0.017) 0.15 (0.006)
0402 1.40 (0.055) 0.65 (0.026) 0.40 (0.016)
0603 1.71 (0.067) 0.90 (0.035) 0.76 (0.030)
Note
Suggested land pattern: According to IPC-7351
LAND PATTERN FOR N AND G WRAPAROUND TERMINATIONS in millimeters (inches)
G
min.
Z
max.
CHIP SIZE Z G X
max. min. max.
0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029)
0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039)
Dimension and tolerance of land pattern shall be defined by PCB designer; PCB can be designed according to IPC-7351A
Generic Requirements for Surface Mount Design and Land Pattern Standard
Revision: 08-Feb-18 Document Number: 53014
2
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
X
max.