CHPHT0603K1004FGT Vishay

CHPHT www.vishay.com Vishay Sfernice High Temperature (245 C) Thick Film Chip Resistor FEATURES High temperature (245 C) Large ohmic value range 0.1 to 100 M Available Operating temperature range (-55 C to +230 C) SMD wraparound chip resistor Storage temperature range (-55 C to +245 C) click logo to get started DESIGN SUPPORT TOOLS Gold terminations for HMP process (< 1 m thick) for temperature up to 245 C Models Tin / silver terminations for operating temperature up to Available 200 C Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe conditions (temperature as high as 230 C powered or up to 245 C un-powered) has leaded Vishay Sfernice to push out the limit of the thick film technology. Designers might read the application note Power Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications) (www.vishay.com/doc 53047) in conjunction with this data sheet to help them to properly design their PCBs and get the best performances of the CHPHT. Vishay Sfernice R&D engineers will be willing to support any customer design considerations. DIMENSIONS in millimeters D C B E A AB C D E CASE SIZE 0.152 0.127 0.127 0.127 0.127 0603 1.60 0.90 0.38 0.31 0.40 0805 1.85 1.25 0.38 0.31 0.50 1206 3.00 1.73 0.38 0.40 0.50 2010 5.03 2.64 0.50 0.50 0.50 SUGGESTED LAND PATTERN (to IPC-7351A) G min. X max. Z max. CASE SIZE Z G X max. min. max. 0603 2.15 0.39 1.03 0805 2.70 0.44 1.38 1206 3.85 1.59 1.85 2010 5.88 3.62 2.77 Revision: 24-Jan-18 Document Number: 52032 1 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CHPHT www.vishay.com Vishay Sfernice STANDARD ELECTRICAL SPECIFICATIONS RATED LIMITING MAX. RESISTANCE POWER TEMPERATURE ELEMENT OVERLOAD TOLERANCE MODEL SIZE RANGE Pn COEFFICIENT VOLTAGE VOLTAGE % W ppm/C V V (at 230 C) CHPHT 0603 0.1 to 25M 0.0125 50 100 1, 2, 5 100, 200 CHPHT 0805 0.1 to 25M 0.02 150 300 1, 2, 5 100, 200 CHPHT 1206 0.1 to 50M 0.025 200 400 1, 2, 5 100, 200 CHPHT 2010 0.1 to 100M 0.1 200 400 1, 2, 5 100, 200 PACKAGING CLIMATIC SPECIFICATIONS ESD packaging available: Waffle pack and plastic tape and Operating temperature range -55 C to +230 C reel (low conductivity). Paper tapes available on request Storage temperature range -55 C to +245 C (ESD only). (For 0603, 0805, and 1206 only.) NUMBER OF PIECESPER PACKAGE MECHANICAL SPECIFICATIONS TAPE Substrate Alumina SIZE TAPE AND REEL WAFFLE WIDTH Technology Thick film (Ruthenium oxyde) PACK MIN. MAX. 0.5 < R < 100 M : double organic coating 0603 5000 Protection 100 R 0.5 : overglaze protection 0805 (no organic coating) 100 4000 8 mm N (W/A): SnAg over nickel 1206 140 barrier for temperature 2010 60 2000 up to 200 C Terminations G (W/A) type: Gold (< 1 m) over nickel barrier for temperature up to 245 C PACKAGING RULES Note Waffle Pack Refer to Application Note Guidelines for Vishay Sfernice Can be filled up to maximum quantity indicated in the table Resistive and Inductive Components (document number: here above, taking into account the minimum order quantity. 52029) for recommended reflow profile. Profile 3 applies When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the BEST TOL. AND TCR VERSUS OHMIC VALUE top of each other and closed by one single cover. TIGHTEST OHMIC BEST TCR To get not stacked up waffle pack in case of ordered TOLERANCE VALUES ppm/C quantity > maximum number of pieces per package: 1 % (F) 5 < R < 10M 100 (K) Please consult Vishay Sfernice for specific ordering 2 % (G) 1 < R < R max. 200 (L) code 5 % (J) 0.1 < R < R max. 200 (L) Tape and Reel Can be filled up to maximum quantity indicated in the table POWER DERATING CURVE here above, taking into account the minimum order quantity. 1200 When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. 1000 When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult 800 Vishay Sfernice for specific ordering code 600 400 200 0 0150 10050 200250 300 Ambient Temperature in C Revision: 24-Jan-18 Document Number: 52032 2 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power (%)