CPF1120R00FEB14 Vishay

CPF www.vishay.com Vishay Dale Metal Film Resistors, Axial, Industrial Power, Precision, Flameproof FEATURES High power rating, small size Flameproof, high temperature coating Available Special filming and coating processes Excellent high frequency characteristics Low noise Low voltage coefficient Material categorization: Available for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM WORKING POWER RATING RESISTANCE TEMPERATURE GLOBAL HISTORICAL TOLERANCE (1) VOLTAGE P RANGE COEFFICIENT 70 C MODEL MODEL % V W ppm/C 5 to 150K 0.1, 0.25, 0.5, 1 25 5 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 CPF1 CPF-1 250 1 0.5 to 150K 1, 2, 5 150 0.5 to 150K 1 200 0.1 to 150K 2, 5 200 5 to 150K 0.1, 0.25, 0.5, 1 25 5 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 CPF2 CPF-2 350 2 0.5 to 150K 1, 2, 5 150 0.5 to 150K 1 200 0.1 to 150K 2, 5 200 8 to 150K 0.1, 0.25, 0.5, 1 25 8 to 150K 0.1, 0.25, 0.5, 1, 2, 5 50 1 to 150K 0.5, 1, 2, 5 100 CPF3 CPF-3 500 3 1 to 150K 1, 2, 5 150 1 to 150K 1 200 0.1 to 150K 2, 5 200 Note (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CPF1562R00FKR36 (preferred part numbering format) C P F1 5 6 2 R 00 F K R 3 6 TOLERANCE TEMPERATURE GLOBAL MODEL RESISTANCE VALUE PACKAGING SPECIAL CODE COEFFICIENT E14 = lead (Pb)-free, bulk CPF1 R = B = 0.1 % E = 25 ppm Blank = standard C = 0.25 % E36 = lead(Pb)-free, T/R (full) CPF2 K = k H = 50 ppm (Dash number) EE6 = lead (Pb)-free, D = 0.5 % R10000 = 0.1 (Up to 3 digits) CPF3 K = 100 ppm F = 1 % T/R (1000 pieces) 10R000 = 10 From 1 to 999 L = 150 ppm G = 2 % B14 = tin/lead, bulk as applicable 150K00 = 150 k N = 200 ppm J = 5 % R36 = tin/lead, T/R (full) RE6 = tin/lead, T/R (1000 pieces) Historical Part Number example: CPF-15620FT-1 R36 (will continue to be accepted) CPF-1 5620 F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING Note For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc 31544). Revision: 16-Sep-16 Document Number: 31021 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000CPF www.vishay.com Vishay Dale TEMPERATURE COEFFICIENT CODES GLOBAL TC CODE HISTORICAL TC CODE TEMPERATURE COEFFICIENT E T-9 25 ppm/C H T-2 50 ppm/C K T-1 100 ppm/C L T-0 150 ppm/C N T-00 200 ppm/C TECHNICAL SPECIFICATIONS PARAMETER UNIT CPF1 CPF2 CPF3 Rated Dissipation at 70 C W 1 2 3 (1) Limiting Element Voltage V 250 350 500 Insulation Voltage V 900 900 900 eff Thermal Resistance K/W 85 60 50 10 Insulation Resistance 10 Category Temperature Range C -65 C/+230 C Note (1) Rated voltage P x R DIMENSIONS DIMENSIONS in inches (millimeters) GLOBAL (1) 1.50 0.125 L MODEL D LD L d 1 max. (38.10 3.18) 0.240 0.020 0.090 0.008 0.310 0.025 0.002 CPF1 (6.10 0.51) (2.29 0.20) (7.87) (0.64 0.05) 0.344 0.031 0.145 0.015 0.425 0.032 0.002 d L CPF2 1 max. (8.74 0.79) (3.68 0.38) (10.80) (0.81 0.05) Note 0.555 0.041 0.180 0.015 0.650 0.032 0.002 (1) CPF3 Lead length for product in bulk pack. For product supplied in (14.10 1.04) (4.57 0.381) (16.51) (0.81 0.05) tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. 120 100 250 CPF2 CPF3 CPF1 80 200 60 150 40 100 20 50 0 - 55 - 25 0 30 60 90 120 150 180 210 240 0 70 AMBIENT TEMP. IN C 0 1 2 345 APPLIED POWER IN W DERATING THERMAL RESISTANCE Note Surface temperatures were taken with an infrared pyrometer in +25 C still air. Resistors were supported by their leads in test clips at a point 0.500 (12.70 mm) out from the resistor body ends. MATERIAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Element Proprietary nickel-chrome alloy Terminal Strength 2 pound pull test Core Cleaned high purity ceramic Coating Special high temperature conformal coat Continuous satisfactory coverage Standard lead material is solder-coated Solderability when tested in accordance with Termination Solderable and weldable per MIL-STD-202, Method 208 MIL-STD-1276, Type C Revision: 16-Sep-16 Document Number: 31021 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 HEAT RISE (C ABOVE AMBIENT) % RATED POWER