End of Life May-2021 CPL www.vishay.com Vishay Dale Wirewound Resistors, Commercial Power, Axial Lead, Low Value FEATURES High power to size ratio Low inductance, less than 5 nH Available Ceramic cases are available with circuit board stand-offs (designated with a -3 model ending) Superior surge capability Extremely low resistance values Available Complete welded construction Special inorganic potting compound and ceramic case provide high thermal conductivity Available in a fireproof package Material categorization: Available for definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING RESISTANCE WEIGHT GLOBAL HISTORICAL TOLERANCE (1) P RANGE (typical) 40 C MODEL MODEL % W g CPL03 CPL-3 3 0.01 to 0.10 1, 2, 3, 5, 10 3.4 CPL03...3 CPL-3-3 3 0.01 to 0.10 1, 2, 3, 5, 10 3.6 CPL05 CPL-5 5 0.01 to 0.10 1, 2, 3, 5, 10 4.8 CPL05...3 CPL-5-3 5 0.01 to 0.10 1, 2, 3, 5, 10 5.0 CPL07 CPL-7 7 0.01 to 0.10 1, 2, 3, 5, 10 6.8 CPL07...3 CPL-7-3 7 0.01 to 0.10 1, 2, 3, 5, 10 7.0 CPL10 CPL-10 10 0.01 to 0.10 1, 2, 3, 5, 10 9.5 CPL10...3 CPL-10-3 10 0.01 to 0.10 1, 2, 3, 5, 10 9.9 CPL15 CPL-15 15 0.01 to 0.10 1, 2, 3, 5, 10 16.8 CPL15...3 CPL-15-3 15 0.01 to 0.10 1, 2, 3, 5, 10 17.4 Note (1) Resistance is measured 3/8 9.52 mm from resistor body TECHNICAL SPECIFICATIONS PARAMETER UNIT CPL RESISTOR CHARACTERISTICS Temperature Coefficient ppm/C 300 Short Time Overload - 5 x rated power for 5 s 1/2 Maximum Working Voltage V (P x R) Operating Temperature Range C -65 to +275 Terminal Strength lb 10 minimum Dielectric Withstanding Voltage V 1000 AC GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CPL05R0500JB143 C P L 05 R 0 50 0J B1 4 3 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL CPL03 R = decimal F = 1.0 % E14 = lead (Pb)-free bulk (dash number) R1000 = 0.10 G = 2.0 % E31 = lead (Pb)-free four layer bulk CPL05 (up to 3 digits) H = 3.0 % E01 = lead (Pb)-free skin pack CPL07 from 1 to 999 J = 5.0 % CPL10 as applicable B14 = tin / lead bulk K = 10.0 % CPL15 B31 = tin / lead four layer bulk J01 = tin / lead skin pack Historical Part Numbering Example: CPL-5-3 0.05 5 % B14 CPL-5-3 0.05 5 % B14 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 11-Jan-2021 Document Number: 30212 1 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life May-2021 CPL www.vishay.com Vishay Dale DIMENSIONS in inches millimeters CPLxx CPLxx...3 B E 1.0 25.4 A 1.0 25.4 A minimum minimum C C D 0.125 3.18 typical E B DIMENSIONS in inches millimeters GLOBAL (1) A B C D E MODEL 0.031 0.794 0.031 0.794 0.031 0.794 0.031 0.794 0.001 0.025 CPL03 0.875 22.22 0.313 7.94 0.313 7.94 - 0.036 0.914 CPL03...3 0.875 22.22 0.313 7.94 0.313 7.94 0.375 9.52 0.036 0.914 CPL05 0.875 22.22 0.375 9.52 0.344 8.73 - 0.036 0.914 CPL05...3 0.875 22.22 0.375 9.52 0.344 8.73 0.406 10.32 0.036 0.914 CPL07 1.391 35.32 0.375 9.52 0.344 8.73 - 0.036 0.914 CPL07...3 1.391 35.32 0.375 9.52 0.344 8.73 0.469 11.91 0.036 0.914 CPL10 1.875 47.62 0.375 9.52 0.344 8.73 - 0.036 0.914 CPL10...3 1.875 47.62 0.375 9.52 0.344 8.73 0.469 11.91 0.036 0.914 CPL15 1.875 47.62 0.500 12.70 0.500 12.70 - 0.036 0.914 CPL15...3 1.875 47.62 0.500 12.70 0.500 12.70 0.625 15.87 0.036 0.914 Note (1) Potting compound may extend outside of ceramic case up to 0.060 1.52 maximum per side MATERIAL SPECIFICATIONS DERATING 120 Element: self-supporting copper-nickel alloy or nickel- chrome alloy, depending on resistance range 100 80 Body: steatite ceramic case with inorganic potting compound 60 Terminals: tinned copper 40 20 Part Marking: Dale, model, wattage, value, tolerance, date code 0 -65 -25 25 75 125 175 225 275 40 AMBIENT TEMPERATURE IN C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (EIA RS-344) Thermal Shock -55 C to +275 C, 5 cycles, 30 min dwell time (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 V for 1 min (2.0 % + 0.05 ) R RMS Low Temperature Operation -65 C, full rated working voltage for 45 min (3.0 % + 0.05 ) R Bias Humidity 75 C, 90 % to 100 % RH, 240 h (5.0 % + 0.05 ) R Load Life 1000 h at rated power, +40 C, 1.5 h ON, 0.5 h OFF (5.0 % + 0.05 ) R 5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, Terminal Strength (1.0 % + 0.05 ) R 360 each Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8 to 3/16 from body (1.0 % + 0.05 ) R Revision: 11-Jan-2021 Document Number: 30212 2 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN %