CRA04S08310K0JTD Vishay

CRA04S www.vishay.com Vishay Thick Film Chip Resistor Array FEATURES Convex terminal array with square corners Wide ohmic range: 10R to 1M0 4 or 8 terminal package with isolated resistors AEC-Q200 qualified Material categorization: for definitions of compliance The CRA04S thick film resistor array is constructed on a please see www.vishay.com/doc 99912 high grade ceramic body with convex terminations. A small package enables the design of high density circuits. The single component reduces board space, component counts, and assembly costs. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING LIMITING ELEMENT TEMPERATURE RESISTANCE TOLERANCE MODEL CIRCUIT P VOLTAGE MAX. COEFFICIENT RANGE E-SERIES 70 C % W V ppm/K 100 1 24 + 96 0.063 50 10 to 1M CRA04S 03 200 2 5 24 Zero-Ohm-Resistor: R 50 m , I = 1 A max. max. TECHNICAL SPECIFICATIONS PARAMETER UNIT CRA04S (2) Rated dissipation at 70 C W per element 0.063 (1) Limiting element voltage V 50 Insulation voltage (1 min) V 100 DC/AC peak Category temperature range C -55 to +155 9 Insulation resistance > 10 Notes (1) Rated voltage: P x R (2) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rate dissipation applies only if the permitted film temperature of 155 C is not exceeded PART NUMBER AND PRODUCT DESCRIPTION (1) Part Number: CRA04S08347K0JTD CR A0 4 S 0 8 3 4 7 K0TJD (2) MODEL TERMINAL STYLE PIN CIRCUIT VALUE TOLERANCE PACKAGING SPECIAL CRA04 S 04 3 = 03 R = decimal F = 1 % TD Up to 2 digits 08 K = thousand G = 2 % TC M = million J = 5 % PZ 0000 = 0 jumper Z = 0 jumper Product Description: CRA04S 08 03 473 J RT7 e3 CRA04S 08 03 473 J RT7 e3 (4) MODEL TERMINAL COUNT CIRCUIT TYPE RESISTANCE VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE CRA04S 04 03 473 = 47 k F = 1 % RT7 e3 = pure tin 08 4702 = 47 k G = 2 % RT6 termination finish 10R0 = 10 J = 5 % PZ 100 = 10 Z = 0 jumper 000 = 0 jumper First two digits (3 for 1 %) are significant. Last digit is the multiplier. Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to the table PACKAGING, see next page Revison: 23-Feb-17 Document Number: 31043 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CRA04S www.vishay.com Vishay PACKAGING PACKAGING CODE MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL PAPER TAPE PART NUMBER PRODUCT DESCRIPTION 180 mm/7 2 mm 10 000 TD RT7 CRA04S 8 mm 330 mm/13 2 mm 20 000 TC RT6 330 mm/13 2 mm 50 000 PZ PZ CIRCUIT DERATING 120 03 CIRCUIT 100 80 60 40 20 8 pin 4 pin 0 - 55 - 25 0 25 50 75 100 125 155 175 70 Ambient Temperature in C DIMENSIONS DIMENSIONS in millimeters PIN NO LA A BB* P TW 1 NOM. 1.0 4 - 0.33 0.15 0.25 0.65 0.35 1.0 0.1 2.0 8 0.30 0.4 0.15 0.25 0.50 0.45 1.0 0.2 TOL. - 0.15 0.15 0.10 0.1 - 0.1 0.15 SOLDER PAD DIMENSIONS in millimeters c w dabe WAVE 0.45 1.45 0.2 0.4 0.5 0.3 The dimensions shown are for a 8 pin part. For parts with ae e different pin numbers use the same pitch and add or subtract pads as required. Revison: 23-Feb-17 Document Number: 31043 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power in %