CRA06S083240RJTA Vishay

CRA06E, CRA06S www.vishay.com Vishay Thick Film Chip Resistor Array FEATURES Convex terminal array available with either scalloped corners (E version) or square corners (S version) Wide ohmic range: 10 to 1 M 4 or 8 terminal package with isolated resistors AEC-Q200 qualified CRA06E and CRA06S Thick Film resistor arrays are constructed on a high grade ceramic body with convex Material categorization: for definitions of compliance terminations. A small package enables the design of high please see www.vishay.com/doc 99912 density circuits. The single component reduces board space, component counts and assembly costs. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING LIMITING ELEMENT TEMPERATURE RESISTANCE TOLERANCE MODEL CIRCUIT P VOLTAGE MAX. COEFFICIENT RANGE SERIES 70 % W V ppm/K 100 1 E24 E96 03 0.063 50 10R to 1M CRA06E 200 2 5 E24 CRA06S Zero-Ohm-Resistor: R = 50 m , I = 1 A max. max. TECHNICAL SPECIFICATIONS PARAMETER UNIT CRA06E AND CRA06S (1) Rated dissipation at 70 C W per element 0.063 (2) Limiting element voltage V 50 Insulation voltage (1 min) V 100 DC/AC PEAK Category temperature range C -55 to +155 9 Insulation resistance > 10 Notes (1) Rated voltage: P x R (2) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rates dissipation applies only if the permitted film temperature of 155 C is not exceed PART NUMBER AND PRODUCT DESCRIPTION (1) Part Number: CRA06S08347K0JTA CR A0 6 S 0 8 3 4 7 K0TJA (2) MODEL TERMINAL STYLE PIN CIRCUIT VALUE TOLERANCE PACKAGING SPECIAL CRA06 S 04 3 = 03 R = decimal F = 1 % TA Up to 2 digits E 08 K = thousand G = 2 % TC M = million J = 5 % 0000 = 0 jumper Z = 0 jumper Product Description: CRA06S 08 03 -05 473 J RT1 e3 CRA06S 08 03 473 J RT1 e3 MODEL TERMINAL COUNT CIRCUIT TYPE RESISTANCE VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE CRA06E 04 03 1R0 = 1 F = 1 % RT1 e3 = pure tin 08 10R = 10 G = 2 % RT6 termination finish CRA06S 47K = 47 k J = 5 % 1M0 = 1 M Z = 0 jumper 0R0 = jumper First two digits (3 for 1 %) are significant. Last digit is the multiplier Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to table PACKAGING, see next page Revison: 28-Feb-17 Document Number: 31002 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CRA06E, CRA06S www.vishay.com Vishay AVAILABLE TYPES AND RANGES TEMPERATURE MODEL TERMINAL COUNT CIRCUIT TOLERANCE COEFFICIENT 100 ppm/K 1 % 04 03 200 ppm/K 2 % 5 % CRA06S 100 ppm/K 1 % 08 03 200 ppm/K 2 % 5 % 100 ppm/K 1 % CRA06E 08 03 200 ppm/K 2 % 5 % PACKAGING PACKAGING CODE PAPER TAPE MODEL TAPE WIDTH PITCH PIECES / REEL PRODUCT PART NUMBER DESCRIPTION 180 mm/7 4 mm 5000 TA RT1 CRA06 330 mm/13 4 mm 20 000 TC RT6 CIRCUIT 120 03 CIRCUIT 100 80 60 40 20 8 pin 4 pin 0 -55 -25 0 25 50 100 125 155 70 Ambient Temperature in C Derating DIMENSIONS S-Version E-Version 1 103 103 PIN 1 e a a e DIMENSIONS in millimeters REFLOW SOLDER PAD DIMENSIONS in millimeters PIN MODEL NO LA A BB* P T W MODEL PINS c w d p a b e 1 CRA06S 4 1.6 0.38 0.61 0.3 0.3 0.8 0.5 1.5 CRA06S 4 0.8 3.1 0.36 0.44 1.15 CRA06E 8 3.2 0.38 - 0.3 0.3 0.8 0.5 1.5 CRA06E 8 0.8 3.1 0.36 0.8 0.44 1.15 0.63 CRA06S CRA06S 8 3.2 0.38 0.61 0.3 0.3 0.8 0.5 1.5 TOL. 0.15 0.15 0.15 0.15 0.15 0.1 0.1 0.15 Revison: 28-Feb-17 Document Number: 31002 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power in %