CRA12E08310R0FTR Vishay

CRA12E, CRA12S www.vishay.com Vishay Thick Film Chip Resistor Array FETAURES Convex terminal array available with either scalloped corners (E version) or square corners (S version) Wide ohmic range: 10R to 1M0 8 or 10 terminal package with isolated resistors Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING LIMITING ELEMENT RESISTANCE TEMPERATURE TOLERANCE MODEL CIRCUIT P VOLTAGE MAX. COEFFICIENT RANGE SERIES 70 C % ppm/K W V 01 02 20 0.100 100 1 10 to 1M E24 E96 50 CRA12E 0.125 200 2 5 10 to 1M E24 CRA12S 03 Zero-Ohm-Resistor: R = 50 m, I = 1.5 A max. max. TECHNICAL SEPCIFICATIONS CRA12E AND CRA12S CRA12E AND CRA12S PARAMETER UNIT CIRCUIT 01 02 20 CIRCUIT 03 (1) Rated dissipation at P W per element 0.1 0.125 70 Limiting element voltage V50 U AC/DC max. Insulation voltage U (1 min) V 100 ins 9 Insulation resistance > 10 Category temperature range C - 55 to + 155 Note (1) Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. PART NUMBER AND PRODUCT DESCRIPTION (2) Part Number: CRA12E08347K0JTR CR A1 2 E 0 8 3 4 7 K0TJR TERMINAL MODEL PIN CIRCUIT VALUE TOLERANCE PACKAGING SPECIAL STYLE CRA12 1 = 01 R = Decimal F = 1 % TR Up to 2 digits S 08 2 = 02 K = Thousand G = 2 % E 10 TL 3 = 03 M = Million J = 5 % 8 = 20 0000 = 0 Z = 0 Jumper Jumper Product Description: CRA12E 08 03 47K 5 % RB8 e3 CRA12E 08 03 47K 5% RB8 e3 RESISTANCE MODEL PIN CIRCUIT TOLERANCE PACKAGING LEAD (Pb)-FREE VALUE CRA12E 08 01 10R = 10 1 % RB8 e3 = Pure tin CRA12S 10 02 47K = 47 k 2 % RD7 termination finish 03 1M = 1M 5 % 20 0R0 = Jumper Note (2) Preferred way for ordering products is by use of the PART NUMBER. Revision: 24-Jun-13 Document Number: 31003 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000CRA12E, CRA12S www.vishay.com Vishay AVAILABLE TYPES AND RANGES TERMINAL TEMPERATURE MODEL CIRCUIT TOLERANCE COUNT COEFFICIENT 01 02 CRA12S 10 03 20 100 ppm/K 1 % 2 % 5 % 200 ppm/K 01 08 02 CRA12E 03 10 20 PACKAGING BLISTER TAPE ACC. IEC 60286-3, TYPE II MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL PART NUMBER PRODUCT DESCRIPTION CRA12E 08 2000 TR 180 mm/7 RB8 CRA12E 10 12 mm 8 mm 330 mm/13 5000 TL RD7 CRA12S 10 CIRCUIT 01 Circuit 02 Circuit 10 pin Pin 1 8 pin 10 pin Pin 1 03 Circuit 20 Circuit 8 pin 10 pin Pin 1 Revision: 24-Jun-13 Document Number: 31003 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000