CRCW08054K02FKEAHP Vishay

333 3 CRCW-HP e3 www.vishay.com Vishay Draloric Pulse Proof, High Power Thick Film Chip Resistors FEATURES Excellent pulse load capability Enhanced power rating Double side printed resistor element AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS LINKS TO ADDITIONAL RESOURCES Automotive Industrial 3D Models Commercial The pulse proof, high power thick film chip resistors series High power is the perfect choice for most fields of power measurement electronics where reliability, stability, high power rating and excellent pulse load performance are of major concern. Typical applications include battery management systems in automotive appliances. TECHNICAL SPECIFICATIONS CRCW0402- CRCW0603- CRCW0805- CRCW1206- CRCW1210- CRCW1218- CRCW2010- CRCW2512- DESCRIPTION HP e3 HP e3 HP e3 HP e3 HP e3 HP e3 HP e3 HP e3 Imperial size 0402 0603 0805 1206 1210 1218 2010 2512 Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M Resistance range 1 to 1 M jumper (0 ) Resistance tolerance 5 % 1 % 0.5 % Temperature coefficient 200 ppm/K 100 ppm/K (1) (2) (3) Rated dissipation, P 0.2 W 0.33 W 0.5 W 0.75 W 0.75 W 1.5 W 1.0 W 1.5 W 70 Operating voltage, 50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V U AC /DC max. RMS Permissible film 155 C (1) temperature, F max. Operating temperature -55 C to +155 C range Max. resistance change at P for resistance 70 range, R/R after: 1000 h 2.0 % 8000 h 4.0 % Permissible voltage against ambient (insulation): 1 min, U 75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Notes Marking: see document Surface Mount Resistor Marking (www.vishay.com/doc 20020) (1) Please refer to APPLICATION INFORMATION below (2) CRCW0402-HP resistors feature a single side printed resistive layer only (3) Specified power rating requires a thermal resistance of R 110 K/W th APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 27-Oct-2020 Document Number: 20043 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D CRCW-HP e3 www.vishay.com Vishay Draloric TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW0402-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 3 A 10 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW0603-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 5 A 8 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW0805-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 6 A 5 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW1206-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 10 A 5 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW1210-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 12 A 4 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW1218-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 20 A 4 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW2010-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 12 A 5 m 0 - max. 200 ppm/K 5 % 1 to 1 M E24 1 % CRCW2512-HP e3 100 ppm/K 1 to 1 M E24 E96 0.5 % Jumper, I = 16 A 5 m 0 - max. Note The temperature coefficient of resistance (TCR) is not specified for 0 jumpers PACKAGING PACKAGING TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS ED = ET7 10 000 180 mm / 7 CRCW0402-HP e3 2 mm EE = EF4 50 000 330 mm / 13 EI = ET2 5000 180 mm / 7 ED = ET3 10 000 180 mm / 7 2 mm EL = ET4 20 000 285 mm / 11.25 CRCW0603-HP e3 EE = ET8 20 000 330 mm / 13 EA = ET1 5000 180 mm / 7 EB = ET5 10 000 4 mm 285 mm / 11.25 EC = ET6 20 000 Paper tape acc. to 330 mm / 13 8 mm IEC 60286-3, type 1a EA = ET1 5000 180 mm / 7 CRCW0805-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25 EC = ET6 20 000 330 mm / 13 EA = ET1 5000 180 mm / 7 CRCW1206-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25 EC = ET6 20 000 330 mm / 13 EA = ET1 5000 180 mm / 7 CRCW1210-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25 EC = ET6 20 000 330 mm / 13 CRCW1218-HP e3 EK = ET9 4000 4 mm 180 mm / 7 EF = E02 4000 4 mm 180 mm / 7 CRCW2010-HP e3 Blister tape acc. to EJ = E08 16 000 12 mm 4 mm 330 mm / 13 IEC 60286-3, type 2a EG = E67 2000 8 mm CRCW2512-HP e3 180 mm / 7 EH = E82 4000 4 mm Revision: 27-Oct-2020 Document Number: 20043 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000