CRCW12061R00FNEA Vishay

D/CRCW e3 Vishay Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free and lead containing soldering processes Metal glaze on high quality ceramic AEC-Q200 qualified Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS SIZE RATED LIMITING TEMPERATURE RESISTANCE DISSIPATION ELEMENT TOLERANCE MODEL COEFFICIENT RANGE SERIES P VOLTAGE % 70 C INCH METRIC ppm/K W U AC/DC max. 100 1 E24 E96 0.063 50 1R0 to 10M 200 5 E24 D10/CRCW0402 0402 RR 1005M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 1.5 A max. max. 100 1 E24 E96 0.10 75 1R0 to 10M 200 5 E24 D11/CRCW0603 0603 RR 1608M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 2.0 A max. max. 100 1 E24 E96 0.125 150 1R0 to 10M 200 5 E24 D12/CRCW0805 0805 RR 2012M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 2.5 A max. max. 100 1 E24 E96 0.25 200 1R0 to 10M 200 5 E24 D25/CRCW1206 1206 RR 3216M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 3.5 A max. max. 100 1 E24 E96 0.5 200 1R0 to 10M 200 5 E24 CRCW1210 1210 RR 3225M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 5.0 A max. max. 100 1 E24 E96 1.0 200 1R0 to 2M2 200 5 E24 CRCW1218 1218 RR 3246M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 7.0 A max. max. 100 1 E24 E96 0.75 400 1R0 to 10M 200 5 E24 CRCW2010 2010 RR 5025M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 6.0 A max. max. 100 1 E24 E96 1.0 500 1R0 to 10M 200 5 E24 CRCW2512 2512 RR 6332M Zero-Ohm-Resistor: R = 20 m, I at 70 C = 7.0 A max. max. Notes These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Marking: See data sheet Surface Mount Resistor Marking (document number 20020). Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. Document Number: 20035 For technical questions, contact: thickfilmchip vishay.com www.vishay.com Revision: 04-Jun-12 125 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000D/CRCW e3 Standard Thick Film Chip Resistors Vishay TECHNICAL SPECIFICATIONS D10/ D11/ D12/ D25/ PARAMETER UNIT CRCW1210 CRCW1218 CRCW2010 CRCW2512 CRCW0402 CRCW0603 CRCW0805 CRCW1206 (1) Rated dissipation P W 0.063 0.1 0.125 0.25 0.5 1.0 0.75 1.0 70 Limiting element voltage V 50 75 150 200 200 200 400 500 U AC/DC max. Insulation voltage V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 U (1 min) ins 9 Insulation resistance > 10 Category temperature C - 55 to + 155 range -1 - 9 Failure rate h < 0.1 x 10 Weight mg 0.65 2 5.5 10 16 29.5 25.5 40.5 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION Part Number: CRCW0603562RFKEC C R C W 0 6 0 3 5 6 2 R F K E C MODEL VALUE TOLERANCE TCR SPECIAL PACKAGING CRCW0402 R = Decimal F = 1.0 % K = 100 ppm/K EA, EB, Up to 2 digits CRCW0603 K = Thousand J = 5.0 % N = 200 ppm/K EC, ED, CRCW0805 M = Million Z = Jumper 0 = Jumper EE, EF, CRCW1206 0000 = Jumper EG, EH, CRCW1210 EI, EL, CRCW1218 EK CRCW2010 CRCW2512 Product Description: D11/CRCW0603 100 562R 1 % ET6 e3 D11/CRCW0603 100 562R 1 % ET6 e3 MODEL TCR RESISTANCE VALUE TOLERANCE LEAD (Pb)-FREE PACKAGING D10/CRCW0402 200 ppm/K 10R = 10 5 % ET1, ET2, e3 = Pure tin D11/CRCW0603 100 ppm/K 562R = 562 1 % ET3, ET4, termination finish D12/CRCW0805 10K = 10 k ET5, ET6, D25/CRCW1206 1M0 = 1 M ET7, ET8, CRCW1210 0R0 = Jumper ET9, EF4, CRCW1218 E02, E67, CRCW2010 E82 CRCW2512 www.vishay.com For technical questions, contact: thickfilmchip vishay.com Document Number: 20035 126 Revision: 04-Jun-12 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000