CRCW120626R1FKEA Vishay

333 3 D/CRCW e3 www.vishay.com Vishay Standard Thick Film Chip Resistors FEATURES Stability at different environmental conditions R/R 1 % (1000 h rated power at 70 C) 2 mm pitch packaging option for 0603 size AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS LINKS TO ADDITIONAL RESOURCES Automotive Industrial 3D Models Telecommunication D/CRCW e3 standard thick film chip resistors are the perfect choice for most fields of modern electronics where high reliability and stability are of major concern. Typical applications include automotive, telecommunications, and industrial. TECHNICAL SPECIFICATIONS D10/CRCW0402 D11/CRCW0603 D12/CRCW0805 D25/CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 DESCRIPTION e3 e3 e3 e3 e3 e3 e3 e3 Imperial size 0402 0603 0805 1206 1210 1218 2010 2512 Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M 1 to Resistance 2.2 M 1 to 10 M 1 to 10 M jumper (0 ) range jumper jumper (0 ) (0 ) Resistance 5 % 1 % tolerance Temperature 200 ppm/K 100 ppm/K coefficient Rated 0.063 W 0.10 W 0.125 W 0.25 W 0.5 W 1.0 W 0.75 W 1.0 W (1) dissipation, P 70 Operating voltage, 50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V U AC /DC max. RMS Permissible film temperature, 155 C (1) F max. Operating temperature -55 C to +155 C range Max. resistance change at P for 70 resistance range, (2) R/R , after : 1000 h 1 % 8000 h 2 % Permissible voltage against ambient (insulation): 1 min, U 75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V ins Failure rate: -9 0.1 x 10 /h FIT observed Notes (1) Please refer to Application Information below (2) Apply to components with stability class 1 Revision: 23-Apr-2021 Document Number: 20035 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DD/CRCW e3 www.vishay.com Vishay APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 200 ppm/K 5 % 1 to 10 M E24 D10/CRCW0402 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 1.5 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 D11/CRCW0603 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 2.0 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 D12/CRCW0805 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 2.5 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 D25/CRCW1206 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 3.5 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 CRCW1210 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 5.0 A 20 m 0 - max. 200 ppm/K 5 % 1 to 2.2 M E24 CRCW1218 e3 100 ppm/K 1 % 1 to 2.2 M E24 E96 Jumper, I = 7.0 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 CRCW2010 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 6.0 A 20 m 0 - max. 200 ppm/K 5 % 1 to 10 M E24 CRCW2512 e3 100 ppm/K 1 % 1 to 10 M E24 E96 Jumper, I = 7.0 A 20 m 0 - max. Note The temperature coefficient of resistance (TCR) is not specified for 0 jumpers Revision: 23-Apr-2021 Document Number: 20035 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000