D/CRCW e3
www.vishay.com
Vishay
Standard Thick Film Chip Resistors
FEATURES
Stability at different environmental conditions
R/R 1 % (1000 h rated power at 70 C)
2 mm pitch packaging option for 0603 size
AEC-Q200 qualified
Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
D/CRCW e3 standard thick film chip resistors are the perfect
Automotive
choice for most fields of modern electronics where high
Industrial
reliability and stability are of major concern. Typical
Telecommunication
applications include automotive, telecommunications, and
industrial.
TECHNICAL SPECIFICATIONS
D10/CRCW0402 D11/CRCW0603 D12/CRCW0805 D25/CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512
DESCRIPTION
e3 e3 e3 e3 e3 e3 e3 e3
Imperial size 0402 0603 0805 1206 1210 1218 2010 2512
Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M
1 to
2.2 M ; 1 to 10 M ;
Resistance
1 to 10 M ; jumper (0 )
range jumper jumper (0 )
(0 )
Resistance
5 %; 1 %
tolerance
Temperature
200 ppm/K; 100 ppm/K
coefficient
Rated
0.063 W 0.10 W 0.125 W 0.25 W 0.5 W 1.0 W 0.75 W 1.0 W
(1)
dissipation, P
70
Operating
voltage, 50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V
U AC /DC
max. RMS
Permissible film
temperature, 155 C
(1)
F max.
Operating
temperature -55 C to +155 C
range
Max. resistance
change at P for
70
resistance range,
(2)
| R/R|, after :
1000 h 1 %
8000 h 2 %
Permissible
voltage
against ambient
(insulation):
1 min, U 75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V
ins
Notes
(1)
Please refer to Application Information below
(2)
Apply to components with stability class 1
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 18-Jun-2018 Document Number: 20035
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000D/CRCW e3
www.vishay.com
Vishay
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
200 ppm/K 5 % 1 to 10 M E24
100 ppm/K 1 % 1 to 10 M E24; E96
D10/CRCW0402 e3
Jumper, I = 1.5 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
D11/CRCW0603 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 2.0 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
D12/CRCW0805 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 2.5 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
D25/CRCW1206 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 3.5 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
CRCW1210 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 5.0 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 2.2 M E24
CRCW1218 e3 100 ppm/K 1 % 1 to 2.2 M E24; E96
Jumper, I = 7.0 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
CRCW2010 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 6.0 A 20 m 0 -
max.
200 ppm/K 5 % 1 to 10 M E24
CRCW2512 e3 100 ppm/K 1 % 1 to 10 M E24; E96
Jumper, I = 7.0 A 20 m 0 -
max.
Note
The temperature coefficient of resistance (TCR) is not specified for 0 jumpers
Revision: 18-Jun-2018 Document Number: 20035
2
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
