CRHV www.vishay.com Vishay Techno Thick Film Chip Resistors, High Voltage FEATURES High voltage up to 3000 V Outstanding stability < 0.5 % Available Flow solderable Custom sizes available Available Automatic placement capability Tape and reel packaging available Termination style: 3-sided wraparound termination or single termination flip chip standard 5-sided wraparound termination available Internationally standardized sizes Suitable for solderable, epoxy bondable, or wire bondable applications Termination material: Solder-coated nickel barrier standard gold, palladium silver, platinum gold, platinum silver or platinum palladium gold terminations available Multiple styles, termination materials and configurations, allow wide design flexibility Non-magnetic terminations available Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MAXIMUM TEMPERATURE POWER RATING RESISTANCE (3) (4) GLOBAL WORKING TOLERANCE COEFFICIENT (2) CASE SIZE P RANGE 70 C (1) MODEL VOLTAGE % (- 55 C to + 150 C) W V ppm/C 2M to 1G 1, 2, 5, 10, 20 CRHV1206 1206 0.30 1500 100 1.1G to 8G 2, 5, 10, 20 4M to 1G 1, 2, 5, 10, 20 CRHV1210 1210 0.45 1750 100 1.1G to 10G 2, 5, 10, 20 6M to 1G 1, 2, 5, 10, 20 CRHV2010 2010 0.50 2000 1.1G to 10G 2, 5, 10, 20 100 11G to 35G 5, 10, 20 10M to 1G 1, 2, 5, 10, 20 CRHV2510 2510 0.60 2500 1.1G to 10G 2, 5, 10, 20 100 11G to 40G 5, 10, 20 12M to 1G 1, 2, 5, 10, 20 CRHV2512 2512 1.0 3000 1.1G to 10G 2, 5, 10, 20 100 11G to 50G 5, 10, 20 Notes For non-standard sizes, lower values or higher power rating requirement, contact factory. (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Resistance values below 1 G are calibrated at 100 V , and values of 1 G and above are calibrated at 1000 V . Calibration at other DC DC voltages available upon request. (3) Contact factory for tighter tolerances. (4) Reference only: Not for all values specified. Consult factory for your size and value. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRHV1206AF100MFKFB (preferred part number format) C RH V1 2 0 6 A F 1 00 M F K F B GLOBAL TERM RESISTANCE SOLDER SIZE TERM MATERIAL TOLERANCE TCR PACKAGING MODEL STYLE VALUE TERMINATION CRHV 1206 A = 3-sided F = Nickel barrier M = M F = 1 % K = 100 ppm D = Sn95/Ag5, B = Bulk 1210 B = Top only A = Palladium silver G = G G = 2 % L = 150 ppm HSD F = T/R 2010 C = 5-sided B = Platinum gold 4M70 = 4.7 M J = 5 % N = 200 ppm E = Sn100 (full reel) 2510 C = Gold 10M0 = 10 M K = 10 % R = 250 ppm F = Sn95/Ag5 1 = T/R 2512 D = Platinum silver 1G00 = 1 G M = 20 % M = 300 ppm N = No solder (1000 pcs) E = Platinum W = 350 ppm S = 5 = T/R palladium gold P = 500 ppm Sn62/Pb36/Ag2, (500 pcs) HSD T = T/R T = Sn90/Pb10 (250 pcs min.) W = Waffle tray Historical Part Numbering: CRHV1206AF1006F100e2 (will continue to be accepted) CRHV 1206 A F 1006 F 100 e2 HISTORICAL TERM TERM RESISTANCE SOLDER SIZE TOLERANCE TCR MODEL STYLE MATERIAL VALUE TERMINATION Note For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc 31543). Revision: 27-May-13 Document Number: 68002 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CRHV www.vishay.com Vishay Techno ENVIRONMENTAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating Temperature: - 55 C to + 150 C Resistive element Ruthenium oxide Life: Less than 0.5 % change when tested at full rated Encapsulation Glass power Substrate 96 % alumina Short Time Overload: Less than 0.5 % R Solder-coated nickel barrier standard. (Reference only: Not for all values specified. Consult factory Gold, palladium silver, platinum gold, Termination platinum silver, platinum palladium gold for your size and value.) terminations available. Pure tin or tin/lead solder alloys standard. Solder finish Tin/silver or tin/lead/silver solder alloys available. VOLTAGE COEFFICIENT OF RESISTANCE CHART SIZE VALUE ( ) VCR (ppm/V) FURTHER INSTRUCTIONS CRHV1206 2M to 199M 25 Values over 200M, consult factory CRHV1210 4M to 200M 25 Values over 200M, consult factory 6M to 99M 15 CRHV2010 Values over 1G, consult factory 100M to 1G 20 10M to 99M 10 CRHV2510 Values over 1G, consult factory 100M to 1G 15 12M to 999M 10 CRHV2512 Values over 5G, consult factory 1G to 5G 25 DIMENSIONS in inches (millimeters) Termination Style A Termination Style B (3-sided wraparound) (Top conductor only) W W L L T T 0.025 0.635 0.025 0.635 Max. Max. LENGTH (L) WIDTH (W) THICKNESS (T) Termination Style C MODEL 0.006 (0.152) 0.006 (0.152) 0.002 (0.051) (5-sided wraparound) W CRHV1206 0.125 0.063 0.025 L CRHV1210 0.125 0.100 0.025 T CRHV2010 0.200 0.100 0.025 0.025 0.635 CRHV2510 0.250 0.100 0.025 Max. CRHV2512 0.250 0.126 0.025 DERATING CURVE 120 100 80 60 40 20 0 20 50 70 100 150 AMBIENT TEMPERATURE IN C (Reference only: Not for all values specified. Consult factory for your size and value.) Revision: 27-May-13 Document Number: 68002 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 % OF RATED POWER