CRMA2010AF10M0FKEF Vishay

333 3 CRMA www.vishay.com Vishay Techno Thick Film Chip Resistors, High Voltage FEATURES AEC-Q200 qualified Voltages up to 3000 V Automatic placement capability Termination style: 3-sided wraparound termination or single termination flip chip available Tape and reel packaging available Internationally standardized sizes, custom sizes available Termination material: solder-coated nickel barrier or solder coated non-magnetic terminations standard Material categorization: for definitions of compliance LINKS TO ADDITIONAL RESOURCES please see www.vishay.com/doc 99912 3D Models STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAX. WORKING RESISTANCE TEMPERATURE CASE TOLERANCE (2) (1) (3) GLOBAL MODEL P VOLTAGE RANGE COEFFICIENT 70 C SIZE % W V ppm/C CRMA1206 1206 0.30 1000 150 to 15M 0.5, 1, 2, 5, 10 100 CRMA1210 1210 0.35 1250 300 to 20M 0.5, 1, 2, 5, 10 100 CRMA2010 2010 0.50 2000 500 to 40M 0.5, 1, 2, 5, 10 100 CRMA2510 2510 0.80 2500 1K to 60M 0.5, 1, 2, 5, 10 100 CRMA2512 2512 1.0 3000 1K to 75M 0.5, 1, 2, 5, 10 100 Notes For non-standard sizes, lower values or higher power rating requirement, contact factory (1) Resistance values calibrated at 10 V . Calibration at other voltages available upon request DC (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (3) Reference only: not for all values specified. Consult factory for your size and value TECHNICAL SPECIFICATIONS PARAMETER UNIT CRMA1206 CRMA1210 CRMA2010 CRMA2510 CRMA2512 Rated dissipation at 70 C W 0.30 0.35 0.50 0.80 1.0 Limiting element voltage V 1000 1250 2000 2500 3000 11 11 11 11 11 Insulation resistance 10 10 10 10 10 Category temperature range C -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 Weight/1000 (typical) g 12.2 19.6 32.2 39.8 49.7 VCR (typical) ppm/V < 2 < 2< 2< 2 < 2 Revision: 19-May-2021 Document Number: 68043 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D CRMA www.vishay.com Vishay Techno GLOBAL PART NUMBER INFORMATION Global Part Numbering: CRMA1210AF1K00FLET (preferred part number format) C RM A1 2 1 0 A F 1 K0 0 F L E T GLOBAL TERMINAL TERMINAL RESISTANCE SOLDER SIZE TOLERANCE TCR PACKAGING MODEL STYLE MATERIAL VALUE TERMINATION CRMA 1206 A = 3-sided F = nickel barrier R = D = 0.5 % K = 100 ppm E = Sn100 B = bulk 1210 B = top only G = non-magnetic K = k F = 1 % (250 pcs max.) 2010 M = M G = 2 % F = T / R 2510 110R = 110 J = 5 % (full reel) 2512 49K9 = 49.9 k K = 10 % 1 = T / R 10M0 = 10 M (1000 pcs) 5 = T / R (500 pcs) T = T / R (250 pcs min.) W = waffle tray Note For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc 31543) DIMENSIONS in inches (millimeters) TERMINATION STYLE A TERMINATION STYLE B LENGTH WIDTH THICKNESS MODEL (3-SIDED WRAPAROUND) (TOP CONDUCTOR ONLY) (L) (W) (T) 0.125 0.006 0.063 0.006 0.025 0.004 CRMA1206 (3.18 0.15) (1.60 0.15) (0.64 0.10) 0.125 0.006 0.100 0.006 0.025 0.004 CRMA1210 W W (3.18 0.15) (2.54 0.15) (0.64 0.10) L L 0.200 0.006 0.100 0.006 0.025 0.004 CRMA2010 (5.08 0.15) (2.54 0.15) (0.64 0.10) T T 0.250 0.006 0.100 0.006 0.025 0.004 0.025 (0.635) 0.025 (0.635) CRMA2510 (6.35 0.15) (2.54 0.15) (0.64 0.10) Max. Max. 0.250 0.006 0.126 0.006 0.025 0.004 CRMA2512 (6.35 0.15) (3.20 0.15) (0.64 0.10) TERMINATION TERMINATION TERMINATION STYLE / SOLDER TERMINATION TYPE MATERIAL STYLE MATERIAL CODE CODE 3-sided (wraparound) AF Solderable Nickel barrier E Top only (flip chip) BF 3-sided (wraparound) AG Solderable Non-magnetic E Top only (flip chip) BG DERATING CURVE MATERIAL SPECIFICATIONS Axis Title Resistive element Ruthenium oxide 120 10000 Encapsulation Epoxy 100 Substrate 96 % alumina 80 1000 Termination Solder-coated nickel barrier Solder finish Pure tin standard 60 40 100 20 0 10 -55 -25 0 25 50 100 125 175 70 155 Ambient Temperature (C) Revision: 19-May-2021 Document Number: 68043 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line Rated Power (%) 1st line 2nd line