CSC05A0110K0GPA Vishay

CSC www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP FEATURES Isolated, bussed, and dual terminator Available schematics available Body height: A profile = 0.195 (4.95 mm) and B profile = 0.295 (7.50 mm) standard custom C profile = 0.350 (8.89 mm) also available Available A profile standard in 4 thru 12 pins Thick film resistive elements Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating Wide resistance range (10 to 2.2 M) Available in bulk pack as standard optional tube pack is also available Meets EIA/ECA-CB23 rev. G whisker test requirements for class 1A products Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS TEMPERATURE MAX. (1) GLOBAL POWER RATING RESISTANCE TOLERANCE TCR TRACKING PACKAGE COEFFICIENT WORKING (1) (2) MODEL / ELEMENT RANGE (-55 C to +125 C) (3) HEIGHT (-55 C to +125 C) VOLTAGE SCHEMATIC P W % ppm/C 70 C ppm/C V DC 10 to 50 250 A0.20 50.1 to 2.2M 100 CSCxxx01 1, 2, 5 50 100 10 to 50 250 B0.25 50.1 to 2.2M 100 10 to 50 250 A0.30 50.1 to 2.2M 100 CSCxxx03 1, 2, 5 50 100 10 to 50 250 B0.40 50.1 to 2.2M 100 10 to 50 250 A0.20 50.1 to 2.2M 100 CSCxxx05 1, 2, 5 150 100 10 to 50 250 B0.25 50.1 to 2.2M 100 Notes See derating curves for package power rating (1) For resistor power ratings at +25 C see derating curves (2) 2 % standard, 1 % and 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less Revision: 16-Jun-2020 Document Number: 31509 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CSC www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGEK (preferred part number format) C S C 0 8 A 0 3 1 0 0 R G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = A profile 01 = bussed R = F = 1 % EK = lead (Pb)-free, bulk Blank = standard available B = B profile 03 = isolated K = k G = 2 % PA = tin / lead, bulk (dash number) 04 = 4 pin 00 = special M = M J = 5 % (up to 3 digits) 08 = 8 pin 10R0 = 10 S = special From 1 to 999 12 = 12 pin 680K = 680 k Z = 0 as applicable 1M00 = 1.0 M Jumper 0000 = 0 Jumper Historical Part Number example: CSC08A03101GEK (will continue to be accepted) CSC 08 A 03 101 G EK HISTORICAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE CODE New Global Part Numbering: CSC08A05131AGEK (preferred part number format) C S C 0 8 A 0 5 1 3 1 A G E K GLOBAL PACKAGE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL HEIGHT VALUE CODE CSC 04 to 12 pin A = A profile 05 = dual 3 digit F = 1 % EK = lead (Pb)-free, bulk Blank = standard available B = B profile terminator impedance G = 2 % PA = tin / lead, bulk (dash number) 04 = 4 pin code, followed J = 5 % (up to 3 digits) 08 = 8 pin by alpha From 1 to 999 12 = 12 pin modifier (see as applicable impedance table) Historical Part Number example: CSC08A05131AGEK (will continue to be accepted) CSC 08 A 05 221 331 G EK HISTORICAL PACKAGE RESISTANCE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL HEIGHT VALUE 1 VALUE 2 CODE Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542) TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage coefficient of resistance V < 50 ppm typical eff Dielectric strength V 200 AC Isolation resistance (03 schematic) > 100M Operating temperature range C -55 to +125 DIMENSIONS in inches (millimeters) A 0.098 (2.49) Max. Max. C Max. 0.130 0.010 Pi n (3.30 0.254) 1 0.045 (1.14) 0.012 0.003 0.032 0.050 (1.27) Max. (0.813) (0.305 0.076) 0.018 0.003 (Leads are along (0.457 0.076) centerline of body) 0.100 0.010 (2.54 0.254) Non-Accumulative B Revision: 16-Jun-2020 Document Number: 31509 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000