D2TO020C2R200FTE3 Vishay

33 3 D2TO20 www.vishay.com Vishay Sfernice Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature 2 Surface mounted resistor - TO-263 (D PAK) style package Wide resistance range from 0.01 to 550 k Non inductive Resistor isolated from metal tab DESIGN SUPPORT TOOLS AVAILABLE Solder reflow secure at 270 C/10 s Material categorization: for definitions of compliance 3D Models please see www.vishay.com/doc 99912 DIMENSIONS in millimeters 4.5 1.25 Footprint recommendation for 10.5 solderable contact area: 8.7 7.8 min. 11.00 1.6 1.50 4.02 0.2 10.1 8.8 6.50 8.00 7.6 4.00 2.49 2.8 2.2 2.40 0.26 1.6 0.3 5.08 2 Tolerance: 0.3 mm 4.5 Notes For the assembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C Power dissipation is 3.1 W at an ambient temperature of 25 C when mounted on a double sided copper board using FR4 HTG, 70 m of copper, 39 mm x 30 mm x 1.6 mm, with thermal vias STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RATED POWER LIMITING ELEMENT TEMPERATURE CRITICAL TOLERANCE MODEL SIZE RANGE P VOLTAGE U COEFFICIENT RESISTANCE 25 C L % W V ppm/C D2TO20 TO-263 0.01 to 550K 20 500 1, 2, 5, 10 150, 250, 700, 1100 12.5K MECHANICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Power Rating and 20 W at 25 C (case Mechanical Protection Molded Thermal Resistance temperature) Resistive Element Thick film of the Component R : 6.5 C/W TH (j - c) Substrate Alumina Temperature Coefficient See Special Feature table Connections Tinned copper Standard 150 ppm/C Dielectric Strength 2000 V - 1 min - 10 mA max. Weight 2.2 g max. RMS IEC 60115-1 (between terminals and board) 6 Insulation Resistance 10 M ENVIRONMENTAL SPECIFICATIONS Inductance 0.1 H Temperature Range -55 C to 155 C IEC 60695-11-5 DIMENSIONS Flammability 2 applications 30 s TO-263 style Standard Package 2 separated by 60 s (D PAK) Revision: 20-Mar-2019 Document Number: 51055 1 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DD D 5 5.15 1.25 8.1 15.4 D2TO20 www.vishay.com Vishay Sfernice SPECIAL FEATURES Resistance Values 0.010 0.045 0.1 0.5 Tolerances 1 % at 10 % Requirement Temperature Coefficient (TCR) (-55 C +150 C) 1100 ppm/C 700 ppm/C 250 ppm/C 150 ppm/C IEC 60115-1 PERFORMANCE TESTS CONDITIONS REQUIREMENTS IEC 60115-1 4.13 2 Pr 5 s for R < 2 Momentary Overload (0.25 % + 0.005 ) 1.5 Pr 5 s for R 2 US < 1.5 UL IEC 60115-1 Load Life (1 % + 0.005 ) 1000 h, 90/30 Pr at +25 C AEC-Q200 REV D conditions: High Temperature Exposure MIL-STD-202 method 108 (0.25 % + 0.005 ) 1000 h, +175 C, unpowered Pre-conditioning 3 reflows according JESTD020D Temperature Cycling IEC 60068-2-14 test Na (0.5 % + 0.005 ) 1000 cycles, -55 C/+175 C Dwell time - 15 min AEC-Q200 REV D conditions: Moisture Resistance MIL-STD-202 method 106 (0.5 % + 0.005 ) 10 cycles, 24 h, unpowered AEC-Q200 REV D conditions: Biased Humidity MIL-STD-202 method 103 (1 % + 0.005 ) 1000 h, 85C, 85 % RH AEC-Q200 REV D conditions: Pre-conditioning 3 reflows according Operational Life JESTD020D (1 % + 0.005 ) MIL-STD-202 method 108 2000 h, 90/30, powered, +125 C AEC-Q200 REV D conditions: ESD Human Body Model AEC-Q200-002 (0.5 % + 0.005 ) 25 kV AD AEC-Q200 REV D conditions: MIL-STD-202 method 204 Vibration (0.5 % + 0.005 ) 5 gs for 20 min, 12 cycles test from 10 Hz to 2000 Hz AEC-Q200 REV D conditions: MIL-STD-202 method 213 Mechanical Shock (0.5 % + 0.005 ) 100 gs, 6 ms, 3.75 m/s 3 shocks/direction AEC-Q200 REV D conditions: Board Flex AEC-Q200-005 (0.25 % + 0.01 ) Bending 2 mm/60 s AEC-Q200 REV D conditions: Terminal Strength AEC-Q200-006 (0.25 % + 0.01 ) 1.8 kgf/60 s ASSEMBLY SPECIFICATIONS For the assembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C TESTS CONDITIONS REQUIREMENTS IEC 60115-1 Resistance to Soldering Heat IEC 60068-2-58 (0.5 % + 0.005 ) Solder bath method: 270 C/10 s Level: 1 IPC/JEDEC J-STD-020C Moisture Sensitivity Level (MSL) + pass requirements of TCR 85 C / 85 % RH / 168 h overload and dielectric strength after MSL Revision: 20-Mar-2019 Document Number: 51055 2 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000