EB8
www.vishay.com
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm)
Greater design latitude
3 body materials: diallyl phthalate, phenolic and
glass-filled polyester
6 contact termination styles, 8 body sizes, 7 mounting
styles
Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact
ELECTRICAL SPECIFICATIONS
Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
Current Rating: 5 A
to 1.80 mm)
Test Voltage Between Contacts:
Polarization between contact positions in all sizes
At sea level: 1800 V
RMS
At 70 000 feet (21 336 meters): 450 V
RMS
Selective gold plating
Insulation Resistance: 5000 M minimum at 500 V
DC
potential
APPLICATIONS
Contact Resistance: 30 mV maximum at rated current (with
For use with 0.062" (1.57 mm) printed circuit boards
gold plating)
requiring an edgeboard type connector on 0.156" (3.96 mm)
Operating Temperature: -55 C to +125 C
centers.
Humidity: 96 h at 90 % relative humidity at +40 C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 M MATERIAL SPECIFICATIONS
Durability: (with gold plating) after 500 cycles of insertion
Body:
and withdrawal of a 0.070" (1.78 mm) thick steel test
1 glass-filled diallyl phtalate per MIL-M-14, type SDG-F
gauge, contact resistance less than 0.030 V at 5 A an d
green, flame retardant (UL 94 V-0)
individual contact retention force when measured with
0.054" (1.37 mm) thick steel test slug greater than oz.
2 glass-filled phenolic per MIL-M-14, type MFH dark
Shock: three 50 g shocks in each of 3 mutually
green, flame retardant (UL 94 V-0)
perpendicular planes with no loss of continuity
3 thermoplastic polyester, glass-filled, black, flam e
Vibration: 2 h in each of 3 mutually perpendicular planes,
retardant (UL 94 V-0)
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity 5 thermoplastic polyphenylene sulfied, glass-filled, brown ,
flame retardant (UL 94 V-0)
PHYSICAL SPECIFICATIONS
Contacts: phosphor bronze
Contact Type: bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side
Polarizing Key: glass reinforced nylon, flame retardant
Contact Spacing: 0.156" (3.96 mm) center to center
(UL 94H-B)
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Contact Plating: gold (see Ordering Information)
Card Slot Depth: dual readout = 0.330" (8.38 mm)
Note
High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
ORDERING INFORMATION
EB8 1 A 22 SG X A
MODEL BODY MATERIAL STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING
TERMINAL VARIATIONS PER SIDE VARIATIONS
KEY POSITIONS
Optional body A, C, D, 6, 10, 12, SG = selective gold plating Key(s) are located
material K, L, or E 15, 18, 22, (0.00003" (0.000762 mm) to right of position(s)
1 = diallyl phthalate 24 or 25 minimum thick) on contact area designated.
2 = phenolic with gold flash on terminal Required only
3 = glass-filled SGF = selective gold plating when polarizing
polyester (0.000010" (0.000254 mm) keys are to be
5 = glass-filled minimum thick) on contact area factory
polyphenylene with gold flash on terminal. installed
sulfied All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
Contact factory for additional
plating options.
Revision: 03-Sep-2019 Document Number: 36005
1
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EB8
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762)
0.060 (1.52)
R Typ.
0.350 (8.89)
Typ.
A
B
D
E
C
C
0.156 (3.96)
Typ.
See Table for
Terminal Variations
0.250
0.340
(6.35)
(8.64)
0.460
(11.70)
Section C to C:
Polarizing Key:
0.054 to 0.071
(1.37 to 1.80)
0.120 0.023
(3.05) (0.584)
0.330 (8.38)
Depth of
Card Insertion
0.325
(8.26)
When ordering polarizing keys individually, specify by the
model number:
0.200
PK-8 between contacts. Hand insertion tool, TPK-8,
(5.08)
provided upon request.
Ref.
# OF CONTACT
AB D E
POSITIONS
6 1.78 (45.21) 1.531 (38.89) 1.240 (31.50) 1.100 (27.94)
10 2.41 (61.21) 2.156 (54.76) 1.864 (47.35) 1.724 (43.79)
12 2.72 (69.09) 2.469 (62.71) 2.176 (55.27) 2.036 (51.71)
15 3.19 (81.03) 2.937 (74.60) 2.644 (67.16) 2.504 (63.60)
18 3.66 (92.96) 3.406 (86.51) 3.112 (79.05) 2.972 (75.49)
22 4.28 (108.71) 4.031 (102.39) 3.736 (94.89) 3.596 (91.34)
24 4.59 (116.59) 4.344 (110.33) 4.051 (102.89) 3.911 (99.34)
25 4.75 (120.65) 4.500 (114.30) 4.207 (106.86) 4.067 (103.30)
Revision: 03-Sep-2019 Document Number: 36005
2
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000