EB8 www.vishay.com Vishay Dale Edgeboard Connectors, Dual Readout FEATURES 0.156 C-C x 0.200 grid (3.96 mm x 5.08 mm) Greater design latitude 3 body materials: diallyl phthalate, phenolic and glass-filled polyester 6 contact termination styles, 8 body sizes, 7 mounting styles Bifurcated bellows contacts provide 2 flexing contact surfaces to assure positive contact ELECTRICAL SPECIFICATIONS Accepts PC board thickness of 0.054 to 0.071 (1.37 mm Current Rating: 5 A to 1.80 mm) Test Voltage Between Contacts: Polarization between contact positions in all sizes At sea level: 1800 V RMS At 70 000 feet (21 336 meters): 450 V RMS Selective gold plating Insulation Resistance: 5000 M minimum at 500 V DC potential APPLICATIONS Contact Resistance: 30 mV maximum at rated current (with For use with 0.062 (1.57 mm) printed circuit boards gold plating) requiring an edgeboard type connector on 0.156 (3.96 mm) Operating Temperature: -55 C to +125 C centers. Humidity: 96 h at 90 % relative humidity at +40 C, dried at room temperature for 3 h minimum, insulation resistance was greater than 5000 M MATERIAL SPECIFICATIONS Durability: (with gold plating) after 500 cycles of insertion Body: and withdrawal of a 0.070 (1.78 mm) thick steel test 1 glass-filled diallyl phtalate per MIL-M-14, type SDG-F gauge, contact resistance less than 0.030 V at 5 A an d green, flame retardant (UL 94 V-0) individual contact retention force when measured with 0.054 (1.37 mm) thick steel test slug greater than oz. 2 glass-filled phenolic per MIL-M-14, type MFH dark Shock: three 50 g shocks in each of 3 mutually green, flame retardant (UL 94 V-0) perpendicular planes with no loss of continuity 3 thermoplastic polyester, glass-filled, black, flam e Vibration: 2 h in each of 3 mutually perpendicular planes, retardant (UL 94 V-0) frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity 5 thermoplastic polyphenylene sulfied, glass-filled, brown , flame retardant (UL 94 V-0) PHYSICAL SPECIFICATIONS Contacts: phosphor bronze Contact Type: bifurcated bellows Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side Polarizing Key: glass reinforced nylon, flame retardant Contact Spacing: 0.156 (3.96 mm) center to center (UL 94H-B) Card Thickness: 0.054 to 0.071 (1.37 mm to 1.80 mm) Contact Plating: gold (see Ordering Information) Card Slot Depth: dual readout = 0.330 (8.38 mm) Note High temperature burn-in, edgeboard connectors, 0.156 (3.96 mm) center to center are on www.vishay.com/doc 36006 ORDERING INFORMATION EB8 1 A 22 SG X A MODEL BODY MATERIAL STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING TERMINAL VARIATIONS PER SIDE VARIATIONS KEY POSITIONS Optional body A, C, D, 6, 10, 12, SG = selective gold plating Key(s) are located material K, L, or E 15, 18, 22, (0.00003 (0.000762 mm) to right of position(s) 1 = diallyl phthalate 24 or 25 minimum thick) on contact area designated. 2 = phenolic with gold flash on terminal Required only 3 = glass-filled SGF = selective gold plating when polarizing polyester (0.000010 (0.000254 mm) keys are to be 5 = glass-filled minimum thick) on contact area factory polyphenylene with gold flash on terminal. installed sulfied All gold plating over 0.00005 (0.00127 mm) minimum nickel underplate. Contact factory for additional plating options. Revision: 03-Sep-2019 Document Number: 36005 1 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 EB8 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.030 (0.762) 0.060 (1.52) R Typ. 0.350 (8.89) Typ. A B D E C C 0.156 (3.96) Typ. See Table for Terminal Variations 0.250 0.340 (6.35) (8.64) 0.460 (11.70) Section C to C: Polarizing Key: 0.054 to 0.071 (1.37 to 1.80) 0.120 0.023 (3.05) (0.584) 0.330 (8.38) Depth of Card Insertion 0.325 (8.26) When ordering polarizing keys individually, specify by the model number: 0.200 PK-8 between contacts. Hand insertion tool, TPK-8, (5.08) provided upon request. Ref. OF CONTACT AB D E POSITIONS 6 1.78 (45.21) 1.531 (38.89) 1.240 (31.50) 1.100 (27.94) 10 2.41 (61.21) 2.156 (54.76) 1.864 (47.35) 1.724 (43.79) 12 2.72 (69.09) 2.469 (62.71) 2.176 (55.27) 2.036 (51.71) 15 3.19 (81.03) 2.937 (74.60) 2.644 (67.16) 2.504 (63.60) 18 3.66 (92.96) 3.406 (86.51) 3.112 (79.05) 2.972 (75.49) 22 4.28 (108.71) 4.031 (102.39) 3.736 (94.89) 3.596 (91.34) 24 4.59 (116.59) 4.344 (110.33) 4.051 (102.89) 3.911 (99.34) 25 4.75 (120.65) 4.500 (114.30) 4.207 (106.86) 4.067 (103.30) Revision: 03-Sep-2019 Document Number: 36005 2 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000