FS www.vishay.com Vishay Huntington Wirewound Resistors, Industrial Power, Silicone Coated, Printed Circuit Board Mount FEATURES High temperature silicone coating Eliminates lead forming to keep parts off of PC board Built in standoffs provide PC board heat protection and opposing feet to avoid rocking Available in non-inductive style (special NI) with Ayrton-Perry winding Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE POWER RATING WEIGHT RANGE RANGE GLOBAL HISTORICAL P (typical) 25 C MODEL MODEL W g 5 % 10 % FS-003 FS-3 3 1.0 to 6K 0.1 to 6K 1.16 FS-05A FS-5A 5 1.0 to 15K 0.1 to 15K 2.12 FS-005 FS-5 7 1.0 to 17.5K 0.1 to 17.5K 3.36 FS-05S FS-5S 8 1.0 to 20.5K 0.1 to 20.5K 4.60 FS-010 FS-10 10 1.0 to 29K 0.1 to 29K 6.24 FS-10S FS-10S 12 1.0 to 58K 0.1 to 58K 6.60 FS-020 FS-20 20 1.0 to 60K 0.1 to 60K 8.82 FS-20S FS-20S 20 1.0 to 95K 0.1 to 95K 11.36 TECHNICAL SPECIFICATIONS PARAMETER UNIT FS RESISTOR CHARACTERISTICS 260 for 20 and above, 400 for 1 to 19.99 , Temperature Coefficient ppm/C special TCs available please contact factory Short Time Overload - 10 x rated power for 5 s Dielectric Withstanding Voltage V 1000, from terminal to mounting hardware AC 1/2 Maximum Working Voltage V (P x R) Operating Temperature Range C -55 to +350 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: FS-010CBE1K000JE (visit www.vishay.net SAP parts manual for all options) F S- 0 1 0 C B E1 K 0 0 0 J E TERMINAL TERMINAL GLOBAL MODEL VALUE TOLERANCE PACKAGING CODE SPECIAL DESIGNATION FINISH (6 digits) (5 digits) (1 digit) (1 digit) (up to 2 digits) (2 digits) (1 digit) (see Standard CB E = lead R = decimal J = 5 % E = lead (Pb)-free (dash number) Electrical (Pb)-free K = thousand K = 10 % cell and bulk pack from 1 to 99 as Specifications 1R500 = 1.5 applicable Global Model 1K500 = 1.5 k NI = non-inductive column for options) Historical Part Number example: FS-10-1K-5 % FS-10 1K 5 % HISTORICAL MODEL RESISTANCE VALUE TOLERANCE SPECIAL Revision: 03-Apr-2019 Document Number: 31845 1 For technical questions, contact: ww2dresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 FS www.vishay.com Vishay Huntington DIMENSIONS in inches millimeters Note Recommended mounting hole is 0.078 diameter. DIMENSIONS in inches millimeters CORE C STANDARD MOUNTING MODEL D E F A B 0.062 CENTERS MAX. MAX. MAX. 0.062 0.031 1.57 0.015 0.381 1.57 0.78 FS-003 1.000 0.200 0.360 0.450 0.281 0.400 0.600 FS-002 25.4 5.08 9.14 11.43 7.14 10.16 15.24 1.125 0.200 0.360 0.450 0.281 0.400 0.900 FS-05A 28.58 5.08 9.14 11.43 7.14 10.16 22.86 FS-005 1.000 0.312 0.360 0.600 0.410 0.500 0.600 FS-006 25.4 7.94 9.14 15.24 10.41 12.7 15.24 1.125 0.312 0.360 0.600 0.410 0.500 0.900 FS-05S 28.58 7.94 9.14 15.24 10.41 12.7 22.86 1.750 0.312 0.360 0.600 0.410 0.500 1.300 FS-010 44.45 7.94 9.14 15.24 10.41 12.7 33.02 2.125 0.312 0.360 0.600 0.410 0.500 1.700 FS-10S 53.98 7.94 9.14 15.24 10.41 12.7 43.18 FS-015 2.000 0.437 0.19 0.725 0.531 0.531 1.700 FS-020 50.8 11.11 4.82 18.41 13.49 13.49 43.18 2.375 0.437 0.19 0.725 0.531 0.531 2.200 FS-20S 60.325 11.11 4.82 18.41 13.49 13.49 55.88 Notes The pin configuration on the terminals for the FS-10S and smaller products is on the center of the terminal. The pin configuration on the terminals for the FS-015 and larger products is on the edge of the terminal MATERIAL SPECIFICATIONS DERATING Element: copper-nickel alloy or nickel-chrome alloy, 120 depending on resistance value 100 Core: ceramic, steatite Coating: special high temperature silicone 80 Standard Terminals: tinned alloy 42 Terminal Bands: alloy 42 60 Part Marking: HEI, model, wattage, value, tolerance, date 40 code 20 NON-INDUCTIVE Models of equivalent physical and electrical specifications 0 - 55 - 50 0 50 150 250 350 are available with non-inductive (Ayrton-Perry) winding. 25 They are identified by adding the letters NI to the end of AMBIENT TEMPERATURE IN C the part number in the special section. For non-inductive models the maximum resistance values are one-half the standard part. Revision: 03-Apr-2019 Document Number: 31845 2 For technical questions, contact: ww2dresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN %