HCTF235L055000BR00 Vishay

HCTF Series www.vishay.com Vishay Beyschlag High Current Thermal Fuse FEATURES Functioning temperature: = (235 15) C F Holding temperature: = 160 C H Current: 55 A Suitable for resistive welding systems Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Automotive - Fan control units The HCTF series is especially designed for high current -ABS applications with an operation temperature up to 160 C. - Diesel glow plug relays In case of excess heat in the range of the functioning - Diesel pre-heaters temperature of (235 15) C the thermo fuse opens automatically and disconnects the circuit. Typical - Electric coolant pumps applications are automotive power electronics that are connected to steady battery power (B+ or terminal number 30). TECHNICAL SPECIFICATIONS DESCRIPTION HCTF 235 Functioning temperature (235 15) C F (1000 h) 160 C Holding temperature H Voltage U 24 V DC (1) 55 A Current I DC Cold resistance R 0.1 m cold after breaking > 1 M Residual resistance R s Note (1) Current rating depends on external thermal management. DIMENSIONS W 1 W 2 D 1 D 2 DIMENSIONS - Mass and relevant physical dimensions W W D D MASS 1 2 1 2 TYPE (mm) (mm) (mm) (mm) (g) HCTF 19.8 0.5 6.5 0.5 8.0 0.5 1.8 0.2 1.3 0.3 Revision: 10-Apr-13 Document Number: 28798 1 For technical questions, contact: fuse vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 HCTF Series www.vishay.com Vishay Beyschlag (1) PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: HCTF235L055000BR00 H C T F 2 3 5 L 0 5 5 0 0 0 B R 0 0 TYPE/ FUNCTIONING TOLERANCE SPECIAL CURRENT PACKAGING SPECIAL TEMPERATURE HCTF235 L = 15 C 0 = Standard Current in mA. BR Up to 2 digits 55000 = 55 A 00 = Standard PRODUCT DESCRIPTION: HCTF 235 15 C BR 55A0 HCTF 235 15 C BR 55A0 FUNCTIONING TYPE TOLERANCE PACKAGING CURRENT TEMPERATURE HCTF 235 15 C BR 55A0 = 55 A Note (1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION PACKAGING REEL TYPE CODE QUANTITY CARRIER TAPE WIDTH PITCH DIAMETER Blister tape HCTF BR 750 acc. IEC 60286-3 32 mm 12 mm 360 mm/14.2 type III ASSEMBLY The high current thermal fuse HCTF 235 is suitable for processing on e.g. automatic electric resistance welding or crimping assembly systems. Any deformation and overheating of the component body to levels above the holding temperature has to be avoided during the assembly. The HCTF 235 CP complies with the JIG 101 list of legal restrictions on hazardous substances. This includes full compliance with the following directives: 2000/53/EC End of Life Vehicle Directive (ELV) and Annex II (ELV II) 2011/65/EU Restriction of the use of Hazardous Substances Directive (RoHS) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) RELATED PRODUCTS A version for automatic insert systems is available, too. See datasheet: HCTF 235 CP Series (www.vishay.com/doc 28850) Revision: 10-Apr-13 Document Number: 28798 2 For technical questions, contact: fuse vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000