HML www.vishay.com Vishay Techno Thick Film Resistors, Industrial, Miniature, Axial-Leaded FEATURES Small case size: 0.073 x 0.036 Rugged plastic housing Non-inductive design 100 % pure tin solder coating on nickel leadwires. Suitable for soldering and welding. Operating temperature range: - 55 C to + 150 C Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM WORKING RESISTANCE TEMPERATURE GLOBAL TOLERANCE (1) P VOLTAGE RANGE COEFFICIENT 70 C MODEL % W V ppm/C 1 to 9.1 2, 5, 10 300 0.063 50 HML01 10 to 22M 1, 2, 5, 10 100, 200, 300 Zero-ohm jumper: R = 30 m , I = 1.2 A max. max. Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less Consult factory for extended resistance range DERATING CURVE MATERIAL SPECIFICATIONS 120 Resistive element Ruthenium oxide 100 Encapsulation Plastic shell 80 Substrate High purity 96 % alumina 60 Termination Solder-coated nickel leadwire 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 Ambient Temperature in C 70 GLOBAL PART NUMBER INFORMATION Global Part Numbering: HML0110K0FKE05 (preferred part number format) H ML 01 10 K 0 F K E 0 5 GLOBAL RESISTANCE TOLERANCE TEMPERATURE PACKAGING SPECIAL MODEL VALUE CODE COEFFICIENT CODE (see Standard R = F = 1 % K = 100 ppm E05 = Blank = Standard Electrical K = k G = 2 % N = 200 ppm Lead (Pb)-free, (dash number) Specifications M = M J = 5 % M = 300 ppm lacer (up to 3 digits) table) 9R10 = 9.1 K = 10 % S = Special, 0 jumper From 43K2 = 43.2 k Z = 0 jumper 1 to 999 1M20 = 1.2 M as applicable 0000 = 0 Jumper Revision: 18-Nov-13 Document Number: 68038 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power in % HML www.vishay.com Vishay Techno DIMENSION in inches (millimeters) A 1 max. D C A E B A B C A D E 1 max. MODEL (LENGTH) (WIDTH) (HEIGHT) (CLEAN LEAD) (LEAD DIA) (LEAD LENGTH) 0.073 0.002 0.036 0.002 0.036 0.002 0.093 0.0074 0.0001 1.400 0.100 HML01 (1.85 0.05) (0.91 0.05) (0.91 0.05) (2.36) (0.188 0.003) (35.56 2.54) Revision: 18-Nov-13 Document Number: 68038 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000