HVR3700001204JA100 Vishay

HVR25, HVR37 www.vishay.com Vishay BCcomponents High Ohmic (up to 10 M )/High Voltage (up to 3.5 kV) Metal Film Leaded Resistors FEATURES Technology: Metal film High pulse loading (up to 10 kV) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Power supplies Electronic ballast A homogenous film of metal alloy is deposited on a high White goods grade ceramic body. After a helical groove has been cut in Television the resistive layer, tinned electrolytic copper wires are welded to the end-caps. The resistors are coated with a blue, non-flammable lacquer, which provides electrical, mechanical, and climatic protection. TECHNICAL SPECIFICATIONS DESCRIPTION UNIT HVR25 HVR37 Resistance Range 100K to 10M 100K to 10M 5 1 5 1 Resistance Tolerance % E24 series E24/E96 series E24 series E24/E96 series Temperature Coefficient ppm/K 200 Climatic Category 55/155/56 (LCT/UCT/days) Rated Dissipation, P W 0.25 0.5 70 Maximum Permissible Voltage U max. DC 1600 3500 V RMS 1150 2500 Basic Specification IEC 60115-1 Stability After: Load (1000 h, P ) (5 % R + 0.1 (1.5 % R + 0.1 (5 % R + 0.1 (1.5 % R + 0.1 70 Long Term Damp Heat Test (56 days) (1.5 % R + 0.1 (1.5 % R + 0.1 (1.5 % R + 0.1 (1.5 % R + 0.1 Soldering (10 s, 260 C) (1 % R + 0.1 (1 % R + 0.1 (1 % R + 0.1 (1 % R + 0.1 Revision: 26-May-14 Document Number: 30260 1 For technical questions, contact: filmresistorsleaded vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 HVR25, HVR37 www.vishay.com Vishay BCcomponents (1) PART NUMBER AND PRODUCT DESCRIPTION Part Number: HVR2500001503JA100 H0V R 250001503JA100 (2) MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING SPECIAL HVR2500 0 = Neutral 0 = Standard 3 digit value F = 1 % A1 Up to 2 digits HVR3700 1 digit multiplier J = 5 % A5 00 = Standard MULTIPLIER R5 3 3 = *10 N4 4 4 = *10 5 5 = *10 Product Description: HVR25 5 % A1 150K HVR25 5 % A1 150K (2) Model TOLERANCE PACKAGING RESISTANCE VALUE HVR25 1 % A1 150K = 150 k HVR37 5 % A5 4M64 = 4.64 M R5 N4 Notes (1) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system (2) Please refer to table PACKAGING, see next page PACKAGING AMMO PACK REEL MODEL TAPING PIECES CODE PIECES CODE 5000 A5 5000 R5 Axial, 52 mm HVR25 1000 A1 Radial 4000 N4 HVR37 Axial, 52 mm 1000 A1 5000 R5 DIMENSIONS L 1 D d L 2 A DIMENSIONS - Resistor types, mass and relevant physical dimensions L L D d A MASS 1 max. 2 max. max. TYPE (mm) (mm) (mm) (mm) (mm) (mg) HVR25 6.5 7.5 2.5 0.58 0.05 52.5 1.5 220 HVR37 10 12 4 0.70 0.03 52.5 1.5 500 Revision: 26-May-14 Document Number: 30260 2 For technical questions, contact: filmresistorsleaded vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000