IH10EB100K Vishay

IH www.vishay.com Vishay Dale Filter Inductors, High Current, Radial Leaded FEATURES Printed circuit mounting Pre-tinned leads Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, class 3 requirements Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Noise filtering for switching regulators, power amplifiers, power supplies and SCR and Triac control circuits ELECTRICAL SPECIFICATIONS Current Rating: Maximum continuous operating current Inductance: Measured at 1.0 V with zero DC current (DC or RMS) based on a 50 C temperature rise Incremental Current: The typical current at which the MECHANICAL SPECIFICATIONS inductance will be decreased by 5 % from its initial zero DC value Wire: Solid soft copper Operating Temperature: -55 C to +125 C (no load), Terminals: Extensions of the winding -55 C to +75 C (at full rated current) Core Material: Ferrite Coating: Polyolefin tubing DIMENSIONS in inches millimeters A B Schematic 1.0 0.125 D 25.40 3.18 Leads tinned to within 0.125 3.18 C MODEL IND. (H) A (MAX.) B (MAX.) C 0.062 1.57 D 0.005 0.127 IH-3 5 0.875 22.23 0.600 15.24 0.500 12.70 0.042 1.067 IH-3 10 1.125 28.58 0.625 15.88 0.687 17.45 0.042 1.067 IH-3 27 0.875 22.23 0.800 20.32 0.437 11.10 0.042 1.067 IH-3 50 0.875 22.23 0.800 20.32 0.750 19.05 0.042 1.067 IH-3 100 1.125 28.58 0.800 20.32 0.937 23.80 0.042 1.067 IH-3 150 1.375 34.93 0.800 20.32 1.062 26.97 0.042 1.067 IH-3 250 1.625 41.28 0.800 20.32 1.312 33.32 0.042 1.067 IH-5 5 0.875 22.23 0.625 15.88 0.750 19.05 0.053 1.35 IH-5 10 1.125 28.58 0.625 15.88 1.000 25.40 0.053 1.35 IH-5 27 0.875 22.23 0.840 21.34 0.562 14.27 0.053 1.35 IH-5 50 1.125 28.58 0.840 21.34 0.750 19.05 0.053 1.35 IH-5 68 1.125 28.58 0.860 21.84 0.875 22.23 0.053 1.35 IH-5 100 1.375 34.93 0.860 21.84 1.000 25.40 0.053 1.35 IH-5 150 1.625 41.28 0.860 21.84 1.250 31.75 0.053 1.35 IH-10 5 1.125 28.58 0.635 16.13 0.812 20.62 0.065 1.65 IH-10 10 1.375 34.93 0.635 16.13 1.218 30.94 0.065 1.65 IH-10 27 1.125 28.58 0.935 23.75 0.687 17.45 0.065 1.65 IH-10 50 1.375 34.93 0.935 23.75 0.937 23.80 0.065 1.65 IH-10 68 1.375 34.93 0.935 23.75 1.125 28.58 0.065 1.65 IH-10 100 1.625 41.28 0.935 23.75 1.312 33.32 0.065 1.65 IH-15 5 1.375 34.93 0.700 17.78 0.937 23.80 0.082 2.08 IH-15 10 1.687 42.85 0.700 17.78 1.500 38.10 0.082 2.08 IH-15 27 1.375 34.93 1.000 25.40 0.937 23.80 0.082 2.08 IH-15 50 1.625 41.28 1.000 25.40 1.125 28.58 0.082 2.08 Revision: 08-Aug-14 Document Number: 34013 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IH www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. AT 1 kHz TOL. DCR MAX. RATED DC CURRENT INCREMENTAL CURRENT (H) ( ) (mA) (mA) MODEL (%) IH-3 5 10 0.015 10 000 25 000 IH-3 10 10 0.018 9000 19 000 IH-3 27 10 0.035 7000 12 000 IH-3 50 10 0.050 5600 8000 IH-3 100 10 0.065 5200 6000 IH-3 150 10 0.075 5000 5000 IH-3 250 10 0.090 5000 4000 IH-5 5 10 0.012 14 000 25 000 IH-5 10 10 0.015 12 000 19 000 IH-5 27 10 0.025 9000 13 000 IH-5 50 10 0.030 8000 10 000 IH-5 68 10 0.035 7500 9000 IH-5 100 10 0.050 7500 7000 IH-5 150 10 0.060 7000 5000 IH-10 5 10 0.010 19 000 25 000 IH-10 10 10 0.012 16 000 19 000 IH-10 27 10 0.018 12 500 12 000 IH-10 50 10 0.025 11 000 10 000 IH-10 68 10 0.027 10 000 8000 IH-10 100 10 0.030 10 000 7000 IH-15 5 10 0.008 24 000 25 000 IH-15 10 10 0.010 20 000 19 000 IH-15 27 10 0.015 16 000 14 000 IH-15 50 10 0.020 15 000 10 000 MARKING - Vishay Dale - Model - Inductance value - Date code ORDERING INFORMATION 10 H IH-5 10 % EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H 0 5 E B 100 K MODEL PACKAGE INDUCTANCE INDUCTANCE CODE VALUE TOLERANCE Revision: 08-Aug-14 Document Number: 34013 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000