IHLE-4040DC-5A www.vishay.com Vishay Dale Low Profile, High Current Inductors with e-field Shield FEATURES High temperature, up to 155 C Shielded construction Frequency range up to 1 MHz Integrated e-field shield eliminates need for separate shielding 20 dB e-field reduction at 1 cm - Measured vertically from top center of device Lowest DCR/H, in this package size Handles high transient current spikes without saturation Coplanarity of the 4 terminals 100 m AEC-Q200 qualified Material categorization: for definitions of compliance Manufactured under one or more of the following: please see www.vishay.com/doc 99912 US Patents 6,198,375/6,204,744/6,449,829/6,460,244. APPLICATIONS Several foreign patents, and other patents pending. Engine and transmission control units Diesel injection drivers Noise suppression for motors STANDARD ELECTRICAL SPECIFICATIONS - Windshield wipers, power seats, power mirrors, heating and ventilation blowers, HID lighting L HEAT 0 LED drivers INDUCTANCE DCR DCR RATING SATURATION 20 % AT 100 kHz, TYP. MAX. CURRENT CURRENT DIMENSIONS in inches millimeters 0.25 V, 0 A 25 C 25 C DC TYP. DC TYP. (3) (4) (H) (m ) (m ) (A) (A) ORIENTATION MARK 0.426 0.010 0.47 1.55 1.66 30.0 28.5 0.426 0.010 10.820 0.254 10.820 0.254 1.0 2.87 3.07 23.5 24.0 2.2 8.15 8.76 15.0 12.0 0.426 0.010 0.426 0.010 10.820 0.254 10.820 0.254 3.3 11.0 11.81 11.0 12.0 4.7 14.3 15.32 9.8 9.2 0.164 0.005 0.164 0.005 4.166 0.127 4.166 0.127 0.118 0.005 0.185 0.005 5.6 16.5 17.60 9.3 9.0 2.997 0.127 4.699 0.127 0.079 0.015 0.079 0.015 6.8 20.9 22.36 9.1 9.0 2.01 0.381 2.01 0.381 10 30.9 33.06 6.5 8.5 15 47.0 50.29 5.1 7.7 0.069 0.015 0.069 0.015 22 70.5 75.44 4.1 6.4 1.75 0.381 1.75 0.381 33 110 117.70 3.7 4.2 47 167 178.00 2.5 4.5 0.118 0.005 0.118 0.005 2.997 0.127 2.997 0.127 Notes 0.476 RECOMMENDED 0.476 (1) 12.09 12.09 All test data is referenced to 25 C ambient PAD LAYOUT 0.249 0.249 (2) 6.32 6.32 Operating temperature range -55 C to +155 C (3) DC current (A) that will cause an approximate T of 40 C (4) DC current (A) that will cause L to drop approximately 20 % 0 0.128 0.229 0.476 0.128 0.229 0.476 (5) The part temperature (ambient + temp. rise) should not exceed 3.25 5.82 12.09 3.25 5.82 12.09 155 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow 0.128 0.195 and other cooling provisions all affect the part temperature. Part 3.25 4.95 temperature should be verified in the end application. The diagram above applies to The diagram above applies to values 2.2 H and above. values 1.5 H and below. DESCRIPTION IHLE-4040DC-5A 33 H 20 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H L E 4 040 D C E R 3 3 0 M 5 A PRODUCT FAMILY SIZE PACKAGE INDUCTANCE TOL. SERIES CODE VALUE Revision: 22-Jan-14 Document Number: 34380 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000IHLE-4040DC-5A www.vishay.com Vishay Dale PERFORMANCE GRAPHS IHLE4040DC-5A 0.47 H IHLE4040DC-5A 1.0 H 0.5 100 1.0 100 L T C T C L 0.4 80 0.8 80 0.3 60 0.6 60 0.2 40 0.4 40 0.1 20 0.2 20 0.0 0 0.0 0 0 1020304050 0 5 10 15 20 25 30 35 40 DC CURRENT (A) DC CURRENT (A) IHLE4040DC-5A 2.2 H IHLE4040DC-5A 3.3 H 2.5 100 5.0 100 T C L T C 2.0 80 4.0 80 L 1.5 60 3.0 60 1.0 40 2.0 40 0.5 20 1.0 20 0.0 0 0.0 0 0 5 10 15 20 25 05 10 15 20 DC CURRENT (A) DC CURRENT (A) IHLE4040DC-5A 4.7 H IHLE4040DC-5A 5.6 H 5.0 100 10.0 100 L T C T C 4.0 80 8.0 80 3.0 60 6.0 L 60 2.0 40 4.0 40 1.0 20 2.0 20 0.0 0 0.0 0 0369 12 15 02468 10 12 14 DC CURRENT (A) DC CURRENT (A) Revision: 22-Jan-14 Document Number: 34380 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H) TEMPERATURE (C) TEMPERATURE (C) TEMPERATURE (C) INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H) TEMPERATURE (C) TEMPERATURE (C) TEMPERATURE (C)