IHTH-0750JZ-5A www.vishay.com Vishay Dale High Current Through Hole Inductor, High Temperature Series FEATURES Shielded construction Frequency range up to 1.0 MHz Handles high transient current spikes without saturation Ultra low buzz noise, due to composite construction High Temperature, up to 155 C AEC-Q200 qualified Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Manufactured under one or more of the following: Desktop/server applications US Patents 6,198,375/6,204,744/6,449,829/6,460,244. High current POL converters Several foreign patents, and other patents pending. Line filters Motor control systems DC/DC converters in distributed power systems STANDARD ELECTRICAL SPECIFICATIONS DC/DC converter for Field Programmable Gate Array (FPGA) L HEAT 0 INDUCTANCE DCR DCR RATING SATURATION DIMENSIONS in inches millimeters 20 % AT 100 kHz, TYP. MAX. CURRENT CURRENT 0.25 V, 0 A 25 C 25 C DC TYP. DC TYP. 0.375 (3) (4) (H) (m) (m ) (A) (A) 9.53 0.47 0.44 0.468 65.0 51.0 0.165 REF. 0.030 4.191 1.0 0.87 0.919 55.0 45.0 0.762 D 2.2 1.55 1.63 44.0 38.0 0.801 3.3 2.28 2.4 33.0 32.0 + 0.010/- 0.020 0.031 0.002 R. x 4.7 2.85 3 25.0 30.0 0.030 0.002 DP. 0.787 0.051 R. x 2.2 uH 6.8 3.97 4.18 23.0 28.0 0.762 0.051 DP. 1001 8.2 5.83 6.14 19.0 20.0 MEXICO 10 7.32 7.7 17.0 18.0 B C 22 12.56 13.22 13.0 12.0 A 33 22.61 23.8 8.5 11.0 A 0.010 B 0.020 C 0.020 D 0.005 VALUE 47 35.34 37.2 6.5 8.0 0.254 0.508 0.508 0.127 0.47H 0.360 9.144 0.310 7.874 0.220 5.588 0.079 2.007 68 46.47 48.92 6.2 6.2 1.0 H 0.486 12.344 0.240 6.096 0.158 4.013 0.071 1.803 82 55.20 58.1 5.4 6.0 2.2 H 0.486 12.344 0.240 6.096 0.158 4.013 0.071 1.803 100 60.80 64 4.9 5.9 3.3 H 0.466 11.836 0.241 6.121 0.161 4.089 0.063 1.600 Notes 4.7 H 0.471 11.963 0.241 6.121 0.161 4.089 0.056 1.422 (1) All test data is referenced to 25 C ambient 6.8 H 0.525 13.335 0.208 5.283 0.142 3.607 0.056 1.422 (2) Operating temperature range - 55 C to + 155 C 8.2 H 0.433 10.998 0.298 7.569 0.136 3.251 0.050 1.270 (3) DC current (A) that will cause an approximate T of 40 C 10 H 0.433 10.998 0.298 7.569 0.136 3.251 0.050 1.270 (4) DC current (A) that will cause L to drop approximately 20 % 0 (5) 22 H 0.452 11.481 0.270 6.858 0.128 3.251 0.039 0.991 The part temperature (ambient + temp. rise) should not exceed 33 H 0.477 12.116 0.250 6.350 0.120 3.048 0.035 0.889 155 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow 47 H 0.440 11.176 0.290 7.366 0.120 3.048 0.031 0.787 and other cooling provisions all affect the part temperature. Part 68 H 0.440 11.176 0.290 7.366 0.120 3.048 0.031 0.787 temperature should be verified in the end application. 82 H 0.465 11.811 0.285 7.239 0.100 2.540 0.028 0.711 100 H 0.465 11.811 0.285 7.239 0.100 2.540 0.028 0.711 DESCRIPTION IHTH-0750JZ-5A 1.0 H 20 % MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE GLOBAL PART NUMBER I H T H 0 750 J Z E B 1 R 0 M 5 A MODEL SIZE PACKAGE INDUCTANCE INDUCT. SERIES CODE VALUE TOL. Revision: 01-Feb-13 Document Number: 34202 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 Document Number: 91000 1