IHTH-1500TZ-5A www.vishay.com Vishay Dale High Current Through-Hole Inductor, High Temperature Series FEATURES Shielded construction High temperature, up to 155 C Excellent DC/DC energy storage up to 2 MHz Filter inductor applications up to SRF (see Standard Electrical Specifications table) Handles high transient current spikes without saturation Ultra low buzz noise, due to composite construction Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS APPLICATIONS L 0 SATURATION 48 V to 12 V input / output filters INDUCTANCE HEAT CURRENT Diesel injection drivers 20 % DCR DCR RATING DC TYP. AT 100 kHz, TYP. MAX. CURRENT SRF (A) Noise suppression for motors 0.25 V, 0 A 25 C 25 C DC TYP. TYP. (2) (3) (1) (H) (m) (m) (A) (MHz) 6.8 1.1 1.2 63.3 75.5 106.2 8.3 DIMENSIONS in inches 10 1.6 1.7 52.9 59.6 85.2 5.7 22 3.7 3.9 34.4 44.8 59.78 3.5 33 4.9 5.1 28.7 39.9 56.6 2.6 47 8.9 9.3 20.5 32.1 45.3 1.9 100 21.5 22.6 12.2 23.2 33.7 1.2 Notes All test data is referenced to 25 C ambient Operating temperature range -55 C to +155 C The part temperature (ambient + temp. rise) should not exceed 155 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application (1) DC current (A) that will cause an approximate T of 40 C (2) DC current (A) that will cause L to drop approximately 20 % 0 (3) DC current (A) that will cause L to drop approximately 30 % 0 VALUE A B C D 6.8 H 0.865 21.97 0.367 9.32 0.113 2.87 0.268 6.81 10 H 0.844 21.44 0.377 9.58 0.113 2.87 0.279 7.09 22 H 0.981 24.92 0.302 7.67 0.09 2.29 0.217 5.51 33 H 0.981 24.92 0.302 7.67 0.09 2.29 0.217 5.51 47 H 1.014 25.76 0.277 7.04 0.073 1.85 0.209 5.31 100 H 1.041 26.44 0.257 6.53 0.058 1.47 0.202 5.13 Revision: 07-May-2020 Document Number: 34559 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IHTH-1500TZ-5A www.vishay.com Vishay Dale DESCRIPTION IHTH-1500TZ-5A 6.8 H 20 % MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE GLOBAL PART NUMBER I H T H 1500 T Z E B 6 R 8 M 5 A MODEL SIZE PACKAGE INDUCTANCE INDUCT. SERIES CODE VALUE TOL. PERFORMANCE GRAPHS 6.8 H 10 H 10.0 100 15 100 T C T C 80 80 8.0 12 L L 6.0 60 9 60 4.0 40 6 40 2.0 20 3 20 0.0 0 0 0 0120 40 60 80 10020 0 20406080 100 DC CURRENT (A) DC CURRENT (A) 33 H 22 H 50 100 25 100 T C T C L 40 80 20 80 L 15 60 30 60 10 40 20 40 5 20 10 20 0 0 0 0 0 1020304050 0 1020304050 DC CURRENT (A) DC CURRENT (A) 47 H 100 H 100 100 200 100 T C T C 80 80 160 80 60 60 120 L 60 L 40 40 80 40 20 20 40 20 0 0 0 0 0 10203040 0 5 10 15 20 DC CURRENT (A) DC CURRENT (A) Revision: 07-May-2020 Document Number: 34559 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H) TEMPERATURE (C) TEMPERATURE (C) TEMPERATURE (C) INDUCTANCE (H) INDUCTANCE (H) INDUCTANCE (H) TEMPERATURE (C) TEMPERATURE (C) TEMPERATURE (C)