Product is End of Life December 2015 IMC-0402 www.vishay.com Vishay Dale High Frequency, Surface Mount, Laser Spiral, Coated Inductors FEATURES Very small size High self-resonant frequency values High Q values relative to size at higher frequencies Coated coil provides protection and moisture resistance Compatible with vapor phase and infrared reflow STANDARD ELECTRICAL SPECIFICATIONS soldering TEST Tape and reel packaging for automatic handling, RATED FREQ. 10 000/reel, EIA-481 SRF DCR DC (MHz) IND. Q MIN. MAX. CURRENT L and Q value not affected by mounting orientation (1) (nH) TOL. L Q MIN. (MHz) ( ) (mA) Material categorization: for definitions of compliance 1.0 0.3 nH, 0.2 nH 100 800 21 6000 0.05 400 please see www.vishay.com/doc 99912 1.2 0.3 nH, 0.2 nH 100 800 21 6000 0.06 400 ELECTRICAL SPECIFICATIONS 1.5 0.3 nH, 0.2 nH 100 800 21 6000 0.07 400 Inductance Range: 1.0 nH to 100 nH 1.8 0.3 nH, 0.2 nH 100 800 21 6000 0.08 400 Inductance and Tolerance: 0.3 nH for 1.0 nH to 5.6 nH, 2.2 0.3 nH, 0.2 nH 100 800 21 6000 0.09 400 5 % for 6.8 nH to 100 nH 2.7 0.3 nH, 0.2 nH 100 800 21 5500 0.10 400 Operating Temperature: -40 C to +100 C 3.3 0.3 nH, 0.2 nH 100 800 21 5500 0.12 400 Core Material: Ceramic 3.9 0.3 nH, 0.2 nH 100 800 20 5200 0.15 360 4.7 0.3 nH, 0.2 nH 100 800 20 4800 0.17 360 TEST EQUIPMENT 5.6 0.3 nH, 0.2 nH 100 800 20 4600 0.19 340 Inductance and Q measured on HP4291B 6.8 5 % 100 800 19 4000 0.30 320 SRF measured on HP8753E 8.2 5 % 100 800 19 3500 0.35 320 DCR measured on HP4338B 10 5 %, 2 % 100 800 19 2800 0.41 320 12 5 %, 2 % 100 800 19 2800 0.45 320 DIMENSIONS in inches millimeters 15 5 %, 2 % 100 800 19 2500 0.60 240 0.020 0.004 0.008 0.2 18 5 %, 2 % 100 800 19 2200 0.70 240 0.5 0.1 22 5 %, 2 % 100 800 19 2000 0.80 200 27 5 %, 2 % 100 800 19 1800 1.20 200 33 5 %, 2 % 100 800 18 1800 1.40 170 0.039 0.004 0.020 0.004 39 5 %, 2 % 100 800 18 1800 1.70 150 0.5 0.1 1.0 0.1 47 5 %, 2 % 100 800 17 1800 2.10 140 56 5 %, 2 % 100 800 17 1500 2.50 130 Solder Pad Layout 68 5 %, 2 % 100 800 15 1500 4.00 120 0.02 0.50 82 5 %, 2 % 100 800 15 1400 4.50 110 0.020 0.50 100 5 %, 2 % 100 800 14 1200 5.50 90 Note 0.063 1.60 (1) Value obtained when current flows and temperature has risen 15 C DESCRIPTION IMC-0402 10 nH 5 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER IM C 0 4 0 2 E R 1 0 N J PRODUCT SIZE PACKAGE INDUCTANCE TOL. FAMILY CODE VALUE Revision: 29-Jun-15 Document Number: 34038 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 Document Number: 91000 1