IMC-1210 www.vishay.com Vishay Dale Wirewound, Surface-Mount Molded Inductors FEATURES Printed marking Molded construction provides superior strength and moisture resistance Compatible with vapor phase and infrared reflow STANDARD ELECTRICAL SPECIFICATIONS soldering TEST FREQ. SRF DCR RATED DC IND. Q Tape and reel packaging for automatic handling, (MHz) TOL. MIN. MAX. CURRENT (H) MIN. (1) 2000/reel, EIA-481 (MHz) () (mA) L & Q Material categorization: for definitions of compliance 0.010 20 % 50 30 1000 0.13 734 0.012 20 % 50 30 1000 0.14 707 please see www.vishay.com/doc 99912 0.015 20 % 50 30 1000 0.16 661 0.018 20 % 50 30 1000 0.18 624 ELECTRICAL SPECIFICATIONS 0.022 20 % 50 30 1000 0.20 592 0.027 20 % 50 30 1000 0.22 564 Inductance range: 0.01 H to 220 H 0.033 20 % 50 30 1000 0.24 540 0.039 20 % 50 30 1000 0.27 530 Special tolerances available upon request 0.047 20 % 50 30 1000 0.30 483 Operating temperature: -55 C to +125 C 0.056 20 % 50 30 1000 0.33 470 0.068 20 % 50 30 1000 0.36 450 Coilform material: non-magnetic from 0.01 H to 0.10 H 0.082 20 % 50 30 900 0.40 450 powdered iron from 0.12 H to 100 H ferrite from 120 H 0.10 20 % 50 30 700 0.44 450 0.12 20 % 25.2 30 500 0.22 584 to 220 H 0.15 20 % 25.2 30 450 0.25 548 0.18 20 % 25.2 30 400 0.28 518 TEST EQUIPMENT 0.22 20 % 25.2 30 350 0.32 484 0.27 20 % 25.2 30 320 0.36 456 HP4342A Q meter with Vishay Dale test fixture or equivalent 0.33 20 % 25.2 30 300 0.40 453 0.39 20 % 25.2 30 250 0.45 450 HP4191A RF impedance analyzer (for SRF measurements) 0.47 20 % 25.2 30 220 0.50 450 Wheatstone bridge 0.56 20 % 25.2 30 180 0.55 450 0.68 20 % 25.2 30 160 0.60 450 0.82 20 % 25.2 30 140 0.67 450 DIMENSIONS in inches millimeters 1.0 10 % 7.96 30 120 0.70 400 1.2 10 % 7.96 30 100 0.75 390 1.5 10 % 7.96 30 85 0.85 370 1.8 10 % 7.96 30 80 0.90 350 0.087 0.008 0.030 2.21 0.203 0.006 2.2 10 % 7.96 30 75 1.0 320 0.762 0.152 2.7 10 % 7.96 30 70 1.1 290 Typ. Ref. 3.3 10 % 7.96 30 60 1.2 260 Typ. 3.9 10 % 7.96 30 55 1.3 250 0.040 0.126 0.008 1.02 4.7 10 % 7.96 30 50 1.5 224 3.20 0.203 5.6 10 % 7.96 30 45 1.6 217 0.098 0.008 6.8 10 % 7.96 30 40 1.8 204 2.49 0.203 8.2 10 % 7.96 30 38 2.0 194 0.028 0.004 0.711 0.102 10 10 % 2.52 30 33 2.1 189 Typ. 12 10 % 2.52 30 30 2.5 173 0.073 0.118 15 10 % 2.52 30 21 2.8 164 1.85 3.0 18 10 % 2.52 30 20 3.3 151 Ref. 22 10 % 2.52 30 19 3.7 145 (1) Guidelines for 0.138 0.020 27 10 % 2.52 30 18 5.0 122 3.5 0.5 Parallel Component 33 10 % 2.52 30 16 6.0 112 Printed Circuit 39 10 % 2.52 30 15 7.0 104 0.118 Mounting Pads on 47 10 % 2.52 30 14 9.0 91 3.0 IMC-1210-100 56 10 % 2.52 30 12 10.0 87 68 10 % 2.52 30 11 11.0 83 Chip Inductors 0.039 0.039 82 10 % 2.52 30 10 12.0 79 1.0 1.0 0.070 100 10 % 0.796 20 9 14.0 73 1.8 120 10 % 0.796 15 8 11.0 70 150 10 % 0.796 15 6.5 15.0 65 Note (1) 180 10 % 0.796 15 6 17.0 60 Recommended spacing between components 220 10 % 0.796 15 6 21.0 50 Note PART MARKING (1) Rated DC current based on the maximum temperature rise, not - Vishay Dale to exceed 40 C at +85 C ambient - Inductance code - Date code DESCRIPTION IMC-1210 10 H 10 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M C 1 2 1 0 E R 1 0 0 K PRODUCT SIZE PACKAGE INDUCTANCE TOL. FAMILY CODE VALUE Revision: 10-Sep-2019 Document Number: 34043 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and al l liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 Document Number: 91000 1