IMS02WWDBH470K40 Vishay

Not for New Designs IMS-2 Vishay Dale Inductors, Commercial, Molded, Shielded, Miniature, Axial Leaded FEATURES Flame retardant coating Electromagnetic shield ELECTRICAL SPECIFICATIONS Small package for a shielded inductor Inductance Tolerance: 10 % standard, 5 % available Epoxy molded construction provides superior moisture protection Insulation Resistance: 1000 M minimum per Precision performance, excellent reliability, sturdy MIL-STD-202, method 302, test condition B construction Dielectric Withstanding Voltage: 200 V per AC Material categorization: for definitions of compliance MIL-STD-202, method 301 (at sea level) please see www.vishay.com/doc 99912 Percent Coupling: 3 % maximum per MIL-PRF-15305 Operating Temperature: -55 C to +105 C MECHANICAL SPECIFICATIONS Terminal Strength: 3 lb pull per MIL-STD-202, method 211, ENVIRONMENTAL PERFORMANCE test condition A, except 180 rotation for a total of 540 TEST CONDITIONS SPECIFICATIONS Weight: IMS-2 = 0.30 g maximum Barometric C MIL-STD-202, method 105 (1) Pressure TEST EQUIPMENT Thermal Shock A-1 MIL-STD-202, method 107 H/P 4342A Q-meter Flammability - MIL-STD-202, method 111 Measurements corporation megacycle meter, model 59 Overload - MIL-PRF-15305 Wheatstone bridge Low Temperature - MIL-PRF-15305 Note Storage (1) Test procedure per MIL-PRF-15305 Resistance to A MIL-STD-202, method 210 Soldering Heat MATERIAL SPECIFICATIONS Resistance to Encapsulant: Epoxy - MIL-STD-202, method 215 Solvents Standard Terminals: 24 AWG, tinned copper DIMENSIONS in inches millimeters 1.50 0.120 0.250 0.010 38.10 3.05 6.35 0.254 0.095 0.010 2.41 0.254 0.020 0.0015 0.508 0.038 STANDARD ELECTRICAL SPECIFICATIONS IND. TOL. Q TEST FREQUENCY L AND Q SRF MIN. DCR MAX. RATED DC CURRENT (1) (2) MODEL (H) (%) MIN. (MHz) (MHz) ( ) (mA) IMS-2 0.10 10 54 25.0 490.0 0.10 670 IMS-2 0.12 10 52 25.0 430.0 0.11 635 IMS-2 0.15 10 50 25.0 415.0 0.12 610 IMS-2 0.18 10 49 25.0 375.0 0.13 585 IMS-2 0.22 10 47 25.0 330.0 0.15 545 IMS-2 0.27 10 46 25.0 300.0 0.16 530 IMS-2 0.33 10 44 25.0 260.0 0.18 495 IMS-2 0.39 10 42 25.0 230.0 0.19 485 IMS-2 0.47 10 41 25.0 220.0 0.21 460 IMS-2 0.56 10 41 25.0 210.0 0.23 440 IMS-2 0.68 10 39 25.0 180.0 0.24 430 IMS-2 0.82 10 38 25.0 165.0 0.27 405 IMS-2 1.0 10 37 25.0 150.0 0.30 385 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table For technical questions, contact: magnetics vishay.com www.vishay.com Document Number: 34045 Revison: 07-Feb-17 1 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IRON CORENot for New Designs IMS-2 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. TOL. Q TEST FREQUENCY L AND Q SRF MIN. DCR MAX. RATED DC CURRENT (1) (2) MODEL (H) (%) MIN. (MHz) (MHz) ( ) (mA) IMS-2 1.2 10 40 7.9 130.0 0.73 247 IMS-2 1.5 10 41 7.9 115.0 0.86 228 IMS-2 1.8 10 43 7.9 105.0 0.95 217 IMS-2 2.2 10 45 7.9 95.0 1.1 202 IMS-2 2.7 10 48 7.9 90.0 1.2 193 IMS-2 3.3 10 49 7.9 80.0 1.3 185 IMS-2 3.9 10 50 7.9 75.0 1.5 173 IMS-2 4.7 10 53 7.9 70.0 2.4 136 IMS-2 5.6 10 54 7.9 60.0 2.9 124 IMS-2 6.8 10 55 7.9 55.0 3.2 118 IMS-2 8.2 10 55 7.9 53.0 3.6 111 IMS-2 10.0 10 57 7.9 50.0 4.0 106 IMS-2 12.0 10 36 2.5 35.0 3.0 122 IMS-2 15.0 10 38 2.5 30.0 3.4 115 IMS-2 18.0 10 40 2.5 26.0 3.8 108 IMS-2 22.0 10 40 2.5 24.0 4.9 96 IMS-2 27.0 10 40 2.5 21.0 5.8 88 IMS-2 33.0 10 41 2.5 20.0 6.5 83 IMS-2 39.0 10 42 2.5 19.0 7.9 75 IMS-2 47.0 10 44 2.5 16.0 9.3 69 IMS-2 56.0 10 44 2.5 15.0 11.0 64 IMS-2 68.0 10 45 2.5 13.0 12.0 61 IMS-2 82.0 10 45 2.5 11.0 13.0 59 IMS-2 100.0 10 40 2.5 10.5 16.8 51 Notes (1) Measured with full length lead (2) Rated DC current based on maximum temperature rise as shown in table ORDERING INFORMATION IMS-2 10 H 10 % ER e2 MODEL INDUCTANCE INDUCTANCE PACKAGE JEDEC LEAD (Pb)-FREE VALUE TOLERANCE CODE STANDARD GLOBAL PART NUMBER I M S 0 2 E R 100 K MODEL PACKAGE INDUCTANCE INDUCTANCE CODE VALUE TOLERANCE Revison: 07-Feb-17 Document Number: 34045 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IRON CORE