K815P, K825P, K845P www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output FEATURES Endstackable to 2.54 mm (0.1 ) spacing Isolation test voltage 5300 V RMS A 1 A Low temperature coefficient of CTR C C Wide ambient temperature range 1 Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Programmable logic controllers Modems Answering machines General applications AGENCY APPROVALS UL1577, file no. E76222 system code C, double protection CSA 22.2 bulletin 5A, double protection CQC: GB8898-2001 (K815P only) DESCRIPTION In the K815P, K825P, K845P parts, each channel consist of a photodarlington optically coupled to a gallium arsenide infrared-emitting diode in an 4 pin, 8 pin, and 16 pin plastic dual inline package. The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. ORDERING INFORMATION K8 5 P DIP-4/DIP-8/DIP-16 PART NUMBER 7.62 mm AGENCY CERTIFIED/PACKAGE CTR (%) UL, cUL > 600 DIP-4 (CQC) K815P DIP-8 K825P DIP-16 K845P ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Forward surge current t 10 s I 1.5 A p FSM Power dissipation P 100 mW diss Junction temperature T 125 C j Rev. 2.1, 24-Sep-12 Document Number: 83524 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 4 pin 8 pin 16 pin K815P, K825P, K845P www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT OUTPUT Collector emitter voltage V 35 V CEO Emitter collector voltage V 7V ECO Collector current I 80 mA C Collector peak current t /T = 0.5, t 10 ms I 100 mA p p CM Power dissipation P 150 mW diss Junction temperature T 125 C j COUPLER AC isolation test voltage (RMS) t = 1 min, f = 50 Hz V 5kV ISO Total power dissipation P 250 mW tot Operating ambient temperature T - 40 to + 100 C amb Storage temperature range T - 55 to + 125 C stg (1) Soldering temperature T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to wave profile for soldering conditions for through hole devices. ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 20 mA V 1.2 1.4 V F F Reverse current V = 6 V I 10 A R R OUTPUT Collector emitter voltage I = 100 A V 35 V C CEO Emitter collector voltage I = 100 A V7V E CEO Collector dark current V = 10 V, I = 0 A, E = 0 I 100 nA CE F CEO COUPLER Collector emitter saturation voltage I = 5 mA, I = 20 mA V 0.1 V C F CEsat I = 10 mA, V = 5 V, F CE Cut-off frequency f 10 kHz c R = 100 L Coupling capacitance f = 1 MHz C 0.3 pF k Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT I /I I = 1 mA, V = 2 V CTR 600 800 % C F F CE SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT V = 2 V, I = 10 mA, R = 100 CE C L Rise time t 300 s r (see figure 1) V = 2 V, I = 10 mA, R = 100 CE C L Turn-off time t 250 s off (see figure 1) Rev. 2.1, 24-Sep-12 Document Number: 83524 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000