L-2010M1R10JBT1 Vishay

L-NS www.vishay.com Vishay Dale Thin Film Low Value (0.03 to 10 ) Thin Film Resistor, Surface Mount Chip FEATURES Homogeneous nickel alloy film No inductance for high-frequency applications Alumina substrates for high power handling Available capability (2 W maximum power rating) Pre-soldered or gold terminations Available Epoxy bondable termination available Material categorization: for definitions of compliance please see Available www.vishay.com/doc 99912 Note Actual Size * This datasheet provides information about parts that are 0805 RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details With extremely low resistances and high power capabilities, Vishays proven and unique ultra-low value resistors can be TYPICAL PERFORMANCE used in your hybrid or surface-mount applications. Thes e ABSOLUTE resistors are available with solderable or weldable terminations. TCR 300 TOL. 1.0 CONSTRUCTION Resistor Film Passivation VALUE AND MINIMUM TOLERANCE Solder VALUE () MINIMUM TOLERANCE Coating 0.1 2.0 % 0.25 1.0 % Metalization Layer 0.5 1.0 % High Purity 1.0 1.0 % Alumina 2.0 1.0 % Adhesion Layer 10.0 1.0 % < 0.1 20 % STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Nickel alloy - Resistance Range 0.03 to 10 - TCR: Absolute 300 ppm/C -55 C to +125 C Tolerance: Absolute 1 % to 20 % (value dependent) - Stability: Absolute -- Stability: Ratio -- Voltage Coefficient -- Working Voltage P x R - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -35 dB (typical) - Shelf Life Stability: Absolute -- COMPONENT RATINGS (1) CASE SIZE POWER RATING (mW) RESISTANCE RANGE ( ) 0505 125 0.05 to 5.0 0508 400 0.03 to 2.0 0603 125 0.10 to 5.0 0612 500 0.05 to 2.5 0705 200 0.10 to 6.0 0805 200 0.10 to 6.0 1005 250 0.15 to 10.0 1020 1000 0.03 to 3.0 1206 330 0.10 to 10.0 1225 2000 0.03 to 2.6 1505 500 0.25 to 10.0 2010 1000 0.17 to 10.0 2512 2000 0.18 to 10.0 Notes Resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 05-Nov-2019 Document Number: 60027 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 L-NS www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D1 W T D2 L SIZE D1 TOPSIDE CASE SIZE LW T D1 D2 (W TERM) + 0.010/- 0.005 0.005 MAX. 0.005 0.005 0.004 0505 0.050 0.050 0.020 0.010 0.015 0.008 0508 0.047 0.079 0.020 0.012 0.015 0.010 0603 0.061 0.033 0.020 0.012 0.015 0.010 0612 0.063 0.126 0.020 0.015 0.015 0.012 (1) 0705 0.075 0.050 0.020 0.019 0.019 0.017 (1) 0805 0.075 0.050 0.020 0.019 0.019 0.017 1005 0.100 0.050 0.030 0.015 0.020 0.017 1020 0.100 0.200 0.030 0.015 0.015 0.013 1206 0.120 0.060 0.030 0.020 0.020 0.017 1225 0.126 0.252 0.020 0.020 0.020 0.017 1505 0.150 0.050 0.030 0.020 0.015 0.018 2010 0.200 0.100 0.030 0.020 0.020 0.017 2512 0.250 0.125 0.030 0.020 0.020 0.017 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) MECHANICAL SPECIFICATIONS Resistive Element Nickel alloy Substrate Material Alumina Terminals Pre-soldered or gold Lead (Pb)-Free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Tin / Lead Option Sn63 Lead (Pb)-Free Finish and Tin / Lead Hot solder dip ENVIRONMENTAL TESTS DERATING CURVE (1) LIMITS TYPICAL 100 ENVIRONMENTAL TEST R % 1 R % (2) STO 0.5 -0.19 80 LTO 0.1 -0.03 60 RSH 0.5 -0.14 40 Moisture 0.5 0.07 20 HTE 1.0 0.02 Load Life (2000 h at +70 C) 0.5 0.20 0 070 125155 TCR (ppm) 300+150 Ambient Temperature C Notes (1) 0.01 additional allowed for measurement error (2) Testing conducted at 2.0 x working voltage on 2512 case size all other 2.5 x Revision: 05-Nov-2019 Document Number: 60027 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Precent of Rated Power