LH1513AAC, LH1513AACTR, LH1513AB www.vishay.com Vishay Semiconductors 2 Form A Solid-State Relay FEATURES Current limit protection DIP S1 S1 Isolation test voltage 5300 V RMS Typical R 10 ON S2 S2 Load voltage 200 V Load current 140 mA S1 S1 S2 S2 High surge capability 8675 SMD Clean bounce free switching Low power consumption High reliability monolithic output die SMD lead available on tape and reel 1324 i179033-1 V Compliant to RoHS Directive 2002/95/EC and in DE i179034 2 accordance to WEEE 2002/96/EC DESCRIPTION APPLICATIONS The LH1513 relays are DPST normally open switches General telecom switching (2 form A) that can replace electromechanical relays in many - On/off hook control applications. The relays are constructed using a GaAlAs - Ring delay LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage - Dial pulse dielectrically isolated technology, is comprised of a - Ground start photodiode array, switch control circuity, and DMOS - Ground fault protection switches. In addition, these relays employ current-limiting Instrumentation circuity, enabling them to pass lightning surge testing as per ANSI/TIA-968-B and other regulatory voltage surge Industrial controls requirements when overvoltage protection is provided. AGENCY APPROVALS UL1577: file no. E52744 system code H, double protection CSA: certification no. 093751 DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending), avilable with option 1 ORDERING INFORMATION DIP SMD L H 1513 A T R PART NUMBER ELECTR. PACKAGE TAPE AND > 0.1 mm VARIATION CONFIG. REEL 7.62 mm PACKAGE UL, CSA SMD-8, tubes LH1513AAC SMD-8, tape and reel LH1513AACTR DIP-8, tubes LH1513AB ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT LED continuous forward current I 50 mA F LED reverse voltage I 10 A V 8V R R Rev. 1.5, 25-Jul-11 Document Number: 83813 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 LH1513AAC, LH1513AACTR, LH1513AB www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT OUTPUT DC or peak AC load voltage I 50 A V 200 V L L Continuous DC load current, I 200 mA L one pole operating Continuous DC load current I 140 mA L two poles operating (1) Peak load current (single shot) t = 100 ms I P SSR Ambient temperature range T - 40 to + 85 C amb Storage temperature range T - 40 to + 150 C stg (2) Pin soldering temperature t = 10 s max. T 260 C sld Input to output isolation voltage V 5300 V ISO RMS Pole-to-pole isolation voltage (S1 to S2) 500 V Output power dissipation (continuous) P 600 mW diss Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to current limit performance application note for a discussion on relay operation during transient currents. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT LED forward current, switch turn-on I = 100 mA, t = 10 ms I 23 mA L Fon LED forward current, switch turn-off V = 150 V I 0.2 0.8 mA L Foff LED forward voltage I = 10 mA V 1.15 1.26 1.45 V F F OUTPUT On-resistance I = 5 mA, I = 50 mA R 610 15 F L ON Pole-to-pole on-resistance matching I = 5 mA, I = 50 mA 0.1 1 F L (S1 to S2) Off-resistance I = 0 mA, V = 100 V R 0.5 5000 G F L OFF Current limit I = 5 mA, t = 5 ms, V = 5 V I 300 360 460 mA F L LMT I = 0 mA, V = 100 V I 0.02 200 nA F L O Off-state leakage current I = 0 mA, V = 200 V I 1A F L O I = 0 mA, V = 1 V C 60 pF F L O Output capacitance I = 0 mA, V = 50 V C 15 pF F L O I = 0 mA 3 pF Pole-to-pole capacitance F (S1 to S2) I = 5 mA 4 pF F Switch offset I = 5 mA V 0.15 V F OS TRANSFER Capacitance (input to output) V = 1 V C 1.1 pF ISO IO Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Turn-on time (NO) I = 10 mA, I = 50 mA t 1.6 2.5 ms F L on Turn-off time (NO) I = 10 mA, I = 50 mA t 0.65 2.5 ms F L off Rev. 1.5, 25-Jul-11 Document Number: 83813 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000