LH1546AABTR Vishay

333 3 LH1546AT, LH1546AABTR www.vishay.com Vishay Semiconductors 1 Form A Solid-State Relay (Normally Open) FEATURES Current limit protection Isolation test voltage 5300 V RMS A 1 6 S 1 Typical R 22 ON Load voltage 350 V 2 5 C DC Load current 120 mA 3 4 S Clean bounce free switching 2 Low power consumption Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS General telecom switching LINKS TO ADDITIONAL RESOURCES Instrumentation Industrial controls 3D Models Design Tools Related Documents AGENCY APPROVALS DESCRIPTION UL The LH1546 is robust, ideal for telecom and ground fault cUL applications. It is a SPST normally open switch (1 Form A) VDE that replaces electromechanical relays in many applications. BSI It is constructed using a GaAlAs LED for actuation control FIMKO and MOSFET switches for the output. In addition, it employs current-limiting circuitry to provide overvoltage protection. ORDERING INFORMATION DIP-6 SMD-6 L H 1546 T R PART NUMBER ELECTR. PACKAGE TAPE AND > 0.1 mm 7.62 mm VARIATION CONFIG. REEL PACKAGE UL, cUL, BSI, FIMKO, VDE SMD-6, tape and reel LH1546AABTR DIP-6, tube LH1546AT Rev. 2.0, 29-Sep-2020 Document Number: 83838 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D LH1546AT, LH1546AABTR www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER CONDITION SYMBOL VALUE UNIT INPUT IRED continuous forward current I 50 mA F IRED reverse voltage V 5V R Input power dissipation P 80 mW diss OUTPUT DC or peak AC load voltage V 350 V L Continuous load current (AC/DC configuration) I 120 mA L Continuous load current (DC only configuration) I 200 mA L SSR output power dissipation (continuous) P 550 mW diss SSR Ambient temperature range T -40 to +85 C amb Storage temperature range T -40 to +150 C stg Soldering temperature t = 10 s max. T 260 C sld Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT IRED forward current, switch turn-on I = 100 mA, t = 10 ms I -0.3 2 mA L Fon IRED forward current, switch turn-off V = 350 V I 0.05 0.15 - mA L Foff IRED forward voltage I = 10 mA V - 1.36 1.45 V F F OUTPUT On-resistance (AC/DC configuration) I = 5 mA, I = 50 mA R -22 35 F L ON On-resistance (DC only configuration) I = 5 mA, I = 100 mA R -5.2 10 F L ON Off-resistance I = 0 mA, V = 100 V R 0.5 5000 - G F L OFF I = 0 mA, V = 100 V I -< 1 200 nA F L O Off-state leakage current I = 0 mA, V = 350 V I - 6 1000 nA F L O I = 0 mA, V = 1 V, 1 MHz C -39- pF F L O Output capacitance (AC/DC configuration) I = 0 mA, V = 50 V, 1 MHz C -6- pF F L O (1) Current limit (AC/DC configuration) I = 5 mA, t = 5 ms, V = 6 V I 170 300 450 mA F L limit TRANSFER Capacitance (input to output) V = 1 V C -0.4 - pF ISO IO Notes Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements (1) No DC mode current limit available PIN CONFIGURATION AC/DC configuration DC only configuration A A Load () Load (+) 1 6 1 6 C C Do not connect Load (-) 2 5 2 5 Load () 3 4 3 4 Fig. 1 - Pin Configuration Rev. 2.0, 29-Sep-2020 Document Number: 83838 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000