LPE-3325 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available FEATURES Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition ELECTRICAL SPECIFICATIONS Inductance Range: 10 H to 3900 H, measured at 0.10 V at 10 kHz without DC current, using an RMS HP 4263A or 4284A impedance analyzer DC Resistance Range: 0.06 to 18.0 , measured at + 25 C 5 C Rated Current Range: 1.00 A to 0.06 A Dielectric Withstanding Voltage: 500 V , 60 Hz, 5 s RMS STANDARD ELECTRICAL SPECIFICATIONS IND. IND. SCHEMATIC DCR MAX. MAX. RATED DC CURRENT SATURATING CURRENT (1) (2) MODEL (H) TOL. LETTER ( ) (A) (A) LPE3325ER100NU 10 30 % A 0.06 1.01 N/A LPE3325ER150NU 15 30 % A 0.08 0.91 N/A LPE3325ER220NU 22 30 % A 0.09 0.83 N/A LPE3325ER330NU 33 30 % A 0.11 0.75 N/A LPE3325ER470NU 47 30 % A 0.14 0.69 N/A LPE3325ER680NU 68 30 % A 0.16 0.63 N/A LPE3325ER101NU 100 30 % A 0.20 0.57 N/A LPE3325ER151NU 150 30 % A 0.76 0.29 N/A LPE3325ER221NU 220 30 % A 0.92 0.26 N/A LPE3325ER331NU 330 30 % A 1.13 0.24 N/A LPE3325ER471NU 470 30 % A 1.35 0.22 N/A LPE3325ER681NU 680 30 % A 1.62 0.20 N/A LPE3325ER102NU 1000 30 % A 1.97 0.18 N/A LPE3325ER152NU 1500 30 % A 2.41 0.16 N/A LPE3325ER222NU 2200 30 % A 3.00 0.15 N/A LPE3325ER332NU 3300 30 % A 5.96 0.10 N/A LPE3325ER392NU 3900 30 % A 7.00 0.10 N/A LPE3325ER100MG 10 20 % A 0.22 0.54 1.480 LPE3325ER150MG 15 20 % A 0.27 0.48 1.240 LPE3325ER220MG 22 20 % A 0.42 0.39 1.050 LPE3325ER330MG 33 20 % A 0.65 0.31 0.872 LPE3325ER470MG 47 20 % A 0.97 0.26 0.740 LPE3325ER680MG 68 20 % A 1.45 0.21 0.622 LPE3325ER101MG 100 20 % A 2.22 0.17 0.518 LPE3325ER151MG 150 20 % A 3.55 0.13 0.426 LPE3325ER221MG 220 20 % A 4.31 0.12 0.354 LPE3325ER331MG 330 20 % A 6.72 0.10 0.290 LPE3325ER471MG 470 20 % A 9.83 0.08 0.244 LPE3325ER681MG 680 20 % A 14.8 0.07 0.204 LPE3325ER102MG 1000 20 % A 18.0 0.06 0.169 Notes (1) DC current that will create a maximum temperature rise of 30 C when applied at + 25 C ambient. (2) DC current that will typically reduce the initial inductance by 20 %. UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC/DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. DESCRIPTION LPE 3325 1000 H 30 % A ER e2 MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E 3 32 5 E R 1 02 N U PRODUCT FAMILY SIZE PACKAGE CODE INDUCTANCE VALUE TOL. CORE Note Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Document Number: 34063 For technical questions, contact: magnetics vishay.com www.vishay.com Revision: 24-Feb-11 1 GAPPED MODELS (B) UNGAPPED MODELS (A) LPE-3325 Surface Mount Transformers/Inductors, Vishay Dale Gapped and Ungapped, Custom Configurations Available DIMENSIONS in inches millimeters SCHEMATIC (top view) Pad Layout 0.056 1.42 Pad Dimensions Typical, Schematic A 6 places 4 3 0.073 1.85 5 2 0.042 1.07 Typical 0.232 6 1 two 5.89 places 0.288 Note 7.32 Reference Only Schematic A for both gapped and ungapped LPE series Dimensional 4 3 Outline ENVIRONMENTAL PERFORMANCE 0.256 6.50 Max. TEST CONDITIONS 1 6 Thermal Cycling Withstands - 55 C to + 125 C Clip Opening Operating (1) Opposite Pin 1 - 55 C to + 125 C Temperature High Humidity 85 % 0.205 5.21 Soldering Heat Tested to + 230 C Max. Mechanical Shock Per MIL-STD-202, method 213 (100G) 0.323 8.20 Vibration Per MIL-STD-202, method 204 (20G) Max. Solderability Per industry standards 0.268 Note 6.81 0.028 (1) Must be checked in end use application 0.71 0.073 1.85 Typ. PART MARKING - Vishay Dale 0.028 0.71 Footprint Diagram - Date code Notes - Marking code (suffix of model ) Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). - Pin 1 indicator Tolerances: xx 0.01 0.25 mm xxx 0.005 0.12 mm . PACKAGING TAPE SPECIFICATIONS: STANDARDS: All embossed carrier tape packaging will be Carrier Tape Type: Conductive accomplished in compliance with latest revision of EIA-481 Cover Tape Type: Anti-static Taping of Surface Mount Components for Automatic Cover Tape Adhesion to Carrier: 40 g 30 g Placement. TAPE COMPONENT UNITS PER 13 REEL SPECIFICATIONS: MODEL WIDTH PITCH REEL Diameter (flange): 13 330.2 mm Maximum Width (over flanges): 1.197 30.4 mm LPE-3325 24 mm 12 mm 1000 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape Embossed Cavity Label Area USER DIRECTION OF FEED Note Top view shown with cover tape removed www.vishay.com For technical questions, contact: magnetics vishay.com Document Number: 34063 2 Revision: 24-Feb-11