LTO 150 www.vishay.com Vishay Sfernice Clip Mount Power Resistor Thick Film Technology FEATURES 150 W at 45 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.03 to 1.3 M Non inductive TO-247 package: compact and easy to mount Designed for clip mounting UL 94 V-0 material used - Compliant with EN45545-2 AEC-Q200 qualified LTO150 are the extension of LTO series. The component is Material categorization: for definitions of compliance used in direct contact with heatsink. Fixation done by clip. please see www.vishay.com/doc 99912 DIMENSIONS in millimeters 15.76 5 5.33 10.5 R2 20.7 0.3 3.5 3.6 0.6 14.5 10.16 2.4 Note Tolerances unless stated: 0.3 mm STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RATED POWER LIMITING ELEMENT TEMPERATURE CRITICAL TOLERANCE MODEL SIZE RANGE P VOLTAGE U COEFFICIENT RESISTANCE 25 C L % W V ppm/C LTO 150 TO-247 0.03 to 1.3M 150 500 1, 2, 5, 10 200, 350, 900 1.66K MECHANICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Mechanical Protection Molded Dissipation and Associated Onto a heatsink + clip Resistive Element Thick film Power Rating and 150 W at +45 C (case temp.) Thermal Resistance R : 0.87 C/W TH (j - c) Substrate Alumina of the Component Free air: 4.5 W at +25 C Connections Tinned copper See Performance table Temperature Coefficient Weight 4 g max. 200 ppm/C Clip Assembly Force 60 N to 110 N Dielectric Strength 3000 V - 1 min RMS IEC 60115-1 10 mA max. 4 Insulation Resistance 10 M ENVIRONMENTAL SPECIFICATIONS Inductance 0.1 H Temperature Range -55 C to +175 C Climatic Category 55 / 175 / 56 IEC 60695-11-5 Flammability 2 applications 30 s separated by 60 s Revision: 15-Feb-18 Document Number: 50071 1 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 LTO 150 www.vishay.com Vishay Sfernice PERFORMANCE TESTS CONDITIONS REQUIREMENTS IEC 60115-1 Momentary Overload 1.5 Pr/5 s (0.5 % + 0.005 ) U < 1.5 U S L IEC 60115-1 Load Life (1 % + 0.005 ) 1000 h Pr (free air) at +25 C 90/30 AEC-Q200 REV D conditions: High Temperature Exposure MIL-STD-202 method 108 (0.5 % + 0.005 ) 1000 h, +175 C, unpowered AEC-Q200 REV D conditions: JESD22 method JA-104 Temperature Cycling (1 % + 0.005 ) 1000 cycles, -55 C to +125 C dwell time -15 min AEC-Q200 REV D conditions: Biased Humidity MIL-STD-202 method 103 (1 % +0.005 ) 1000 h, 85 C, 85 % RH (10 % of free air power) AEC-Q200 REV D conditions: Operational Life MIL-STD-202 method 108 (1 % +0.005 ) 1000 h, 90/30, powered (free air) at +125 C AEC-Q200 REV D conditions: ESD Human Body Model AEC-Q200-002 IEC 61000-4-2 (0.5 % +0.005 ) 25 kV AD AEC-Q200 REV D conditions: MIL-STD-202 method 204 Vibration (0.5 % +0.005 ) 5 gs for 20 min, 12 cycles test from 10 Hz to 2000 Hz AEC-Q200 REV D conditions: MIL-STD-202 method 213 Mechanical Shock (0.5 % +0.005 ) 100 gs, 6 ms, 3.75 m/s 3 shocks/direction AEC-Q200 REV D conditions: Terminal Strength AEC-Q200-006 (0.25 % +0.01 ) 2 kgf, 60 sec SPECIAL FEATURES Resistance Values 0.015 0.1 > 20 Tolerances 1 % at 10 % Typical Temperature Coefficient 900 ppm/C 350 ppm/C 200 ppm/C (-55 to +175 C) CHOICE OF THE HEATSINK The user must choose according to the working conditions of the component (power, room temperature). Maximum working temperature must not exceed 175 C. The dissipated power is simply calculated by the following ratio: 1 T P = ----------------------------------------------------------------------------------- R ++R R TH (j - c) TH (c - h) TH (h - a) P: Expressed in W T: Difference between maximum working temperature and room temperature R : Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance of the TH (j - c) component. R : Thermal resistance value measured between outer side of the resistor and upper side of the heatsink. This is the thermal resistance TH (c - h) of the interface (grease, thermal pad), and the quality of the fastening device. R : Thermal resistance of the heatsink TH (h - a) Example: R + R for LTO 150 power rating 10 W at ambient temperature +25 C TH (c - h) TH (h - a) Thermal resistance R : 0.87 C/W TH (j - c) (1) Considering equation we have: T = 175 C - 25 C = 150 C T 150 R + R + R = ------- = ----------- = 15 C/W TH (j - c) TH (c - h) TH (h - a) P 10 R + R = 15 C/W - 0.87 C/W = 14.13 C/W TH (c - h) TH (h - a) Example with a thermal grease R = 0.5 C/W, we need a heatsink with R = 13.63 C/W TH (c - h) TH (h - a) Revision: 15-Feb-18 Document Number: 50071 2 For technical questions, contact: sferfixedresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000