M-0805K1005FST1 Vishay

M www.vishay.com Vishay Dale Thin Film High Reliability Thick Film Resistor, Surface Mount Chip FEATURES High purity alumina substrate for high power dissipation (2 W max.) Wraparound terminations featuring a thin film Available adhesion layer covered with a leach resistant Actual Size nickel barrier layer for +150 C operating Available 0502 conditions High speed laser trimming for high volume Utilizing proven expertise in thick and thin film resistors to requirements Available satisfy your manufacturing needs, Vishay provides a high rel Ruthenium based cermet thick film for chip with the same reliability and stability found in military dependable performance grade resistors. These chips are available in the widest Available Fired-on glass passivation range of sizes, values, and performance characteristics. And Tape and reel packaging standard static-free manufactured on the Mil-PRF-55342 qualified controlled waffle pack available production line. All product is 100 % electrical tested for Active trim and 0 chips tolerance and after thermal shock testing and typically meet Sulfur resistant (per ASTM B809-95 humid vapor test) the requirements of group A in MIL-PRF-55342 Material categorization: for definitions of compliance performance. please see www.vishay.com/doc 99912 Note CONSTRUCTION * This datasheet provides information about parts that are Overglaze RoHS-compliant and/or parts that are non-RoHS-compliant. For Resistor example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE Alumina Substrate TCR 100 Inner Electrode Plated Solder TOL. 1 Nickel Barrier STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Ruthenium - Resistance Range 10 to 25 M - TCR: Absolute 100 ppm/C to 300 ppm/C -55 C to +125 C Tolerance: Absolute 1 % to 10 % - Stability: Absolute R 0.15 % - Stability: Ratio -- Voltage Coefficient -- Working Voltage 25 V to 200 V - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -35 dB (typical) - Shelf Life Stability: Absolute -- COMPONENT RATINGS (1) CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 100 25 10 to 10M 0502 100 25 10 to 25M 0504 125 40 10 to 25M 0505 125 40 10 to 25M 0603 150 40 10 to 25M 0705 200 50 10 to 25M 0805 200 50 10 to 25M 1005 250 75 10 to 25M 1010 500 75 10 to 25M 1206 330 100 10 to 25M 1505 350 100 10 to 25M 2010 1000 175 10 to 25M 2208 750 150 10 to 25M 2512 2000 200 10 to 25M Notes Consult factory for nominals above 25 M (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 11-Feb-16 Document Number: 60031 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 M www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0402 B 0.042 0.006 0.022 0.005 0.010 to 0.033 0.010 0.005 0.010 0.005 0502 B 0.055 0.005 0.025 0.005 0.020 max. 0.010 0.005 0.015 0.005 0504 B 0.055 0.005 0.040 0.005 0.020 0.005 0.010 0.005 0.010 0.005 0505 B 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 B 0.064 0.006 0.032 0.005 0.010 to 0.033 0.012 0.005 0.015 0.005 (1) 0705, 0805 B 0.080 0.006 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1005 B 0.105 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 1010 B 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 B 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 1505 B 0.155 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2010 B 0.197 0.006 0.098 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2208 B 0.230 0.007 0.075 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2512 B 0.250 0.006 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS ENVIRONMENTAL TEST 10 R (%) 100 k R (%) Thermal Shock 0.02 0.03 Short Term Overload 0.02 0.02 Low Temperature Operation 0.03 0.04 Resistance to Solder Heat 0.06 0.02 Moisture Resistance 0.10 0.08 High Temperature Exposure 0.02 0.02 DERATING CURVE 100 80 60 40 20 0 070 125155 Ambient Temperature C Revision: 11-Feb-16 Document Number: 60031 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Precent of Rated Power