M35 www.vishay.com Vishay Wet Tantalum Capacitors Surface Mount, Molded Case FEATURES Molded surface mountable design Terminations: standard tin/lead (SnPb), 100 % tin (RoHS compliant) available Industry standard ratings Model M35 wet tantalum electrolytic chip capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a 3 V reverse voltage capability at + 85 C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C Life Test: Capacitors are capable of withstanding a 2000 h (to + 125 C with voltage derating) life test at a temperature of + 85 C or + 125 C at the applicable rated DC working voltage. Capacitance Tolerance: At 120 Hz, + 25 C. 20 % standard. 10 %, 5 % available as special. Following life test: DC Leakage Current (DCL Max.): At + 25 C and above: 1. DCL, measured at + 85 C rated voltage, shall not be in Leakage current shall not exceed the values listed in the excess of the original requirement. Standard Ratings Tables. 2. The equivalent series resistance shall not exceed 150 % of the initial requirement. 3. Change in capacitance shall not exceed 10 % from the initial measurement. ORDERING INFORMATION M35 C 826 M 125 B Z S L MODEL CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING TERMINATION RELIABILITY TEMP ESR CODE TOLERANCE AT + 85 C AND PACKAGING LEVEL See This is K = 10 % This is expressed in A = 100 % tin Z = Non-ER S = Std S = Std. Ratings expressed in M = 20 % volts. To complete the (RoHS compliant), L = Low and Case picofarads. three-digit block, bulk Codes The first two zeros precede the B = Std, tin/lead, table digits are the voltage rating. bulk significant A decimal point is figures. The indicated by an R third is the (6R3 = 6.3 V) number of zeros to follow. Note Packaging: The use of formed plastic tubes for packing bulk components is standard DIMENSIONS in inches millimeters L WP CASE CODE L (MAX.) W H P (MIN.) T T (MIN.) W H 0.835 0.315 0.012 0.295 0.012 0.118 0.236 0.012 0.075 C 21.2 8 0.3 7.5 0.3 3.0 6.0 0.3 1.9 Revision: 07-Nov-11 Document Number: 40095 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T H H T W M35 www.vishay.com Vishay RECOMMENDED REFLOW PROFILES T C p t p T C L T MAX. C s (t L) T MIN. C s PREHEAT (t ) s 25 C TIME (s) ALL CASE CODES T T T T T MIN. T MIN. T MAX. T MAX. t t p p L L s s s s s s t t p L Lead (Pb)-free Sn/Pb Lead (Pb)-free Sn/Pb Lead (Pb)-free Sn/Pb Lead (Pb)-free Sn/Pb Lead (Pb)-free Sn/Pb 260 C 240 C 10 217 C 183 C 150 C 100 C 200 C 150 C 60 to 150 60 to 90 60 MOUNTING Due to the size and weight of these capacitors, we recommend that a supplemental mounting restraint to be used in printed circuit board attachment in addition to the reflowed solder. One recommendation is to use an adhesive such as defined in the J-STD-001DS. This is the Space Application Electronic Hardware Addendum to J-STD-001 (Requirements for Solder Electrical and Electronic Assemblies). STANDARD RATINGS MAX. CAPACITANCE MAX. MAX. DCL (A) AT CHANGE (%) AT RIPPLE CAPACITANCE CASE MAX. ESR MAX. ESR PART NUMBER 40 kHz (F) CODE AT + 25 C AT - 55 C + 85 C RMS + 25 C - 55 C + 85 C + 125 C + 125 C (mA) 6 V AT + 85 C 4 V AT + 125 C DC DC 30 C M35C306(1)006(2)ZS(3) 4.0 100 1.0 2.0 - 40 + 10.5 + 12 820 68 C M35C686(1)006(2)ZS(3) 3.2 60 1.0 2.0 - 40 + 14 + 16 960 220 C M35C227(1)006(2)ZS(3) 3.0 36 2.0 9.0 - 64 + 13 + 16 1000 8 V AT + 85 C 5 V AT + 125 C DC DC 25 C M35C256(1)008(2)ZS(3) 4.0 100 1.0 2.0 - 40 + 10.5 + 12 820 56 C M35C566(1)008(2)ZS(3) 3.3 59 1.0 2.0 - 40 + 14 + 16 900 180 C M35C187(1)008(2)ZS(3) 3.0 45 2.0 9.0 - 60 + 13 + 16 1000 10 V AT + 85 C 7 V AT + 125 C DC DC 20 C M35C206(1)010(2)ZS(3) 4.0 120 1.0 2.0 - 32 + 10.5 + 12 820 47 C M35C476(1)010(2)ZS(3) 3.7 90 1.0 2.0 - 36 + 14 + 16 855 120 C M35C127(1)010(2)ZS(3) 3.2 54 2.0 6.0 - 40 + 14 + 16 900 150 C M35C157(1)010(2)ZS(3) 3.0 54 2.0 9.0 - 55 + 13 + 16 900 Note Part number definitions: (1) Capacitance tolerance: K, M (2) Termination/packaging: (see Ordering Information) Reliability level: Z = Non-ER Temperature: S = STD (3) ESR: S = STD, L = Low (1/2 standard ESR value) Revision: 07-Nov-11 Document Number: 40095 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TEMPERATURE (C)