M55342E06B174ART0 Vishay

333 3 E/H (Military M/D55342) www.vishay.com Vishay Dale Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor, Surface-Mount Chip FEATURES Established reliability, S and V failure rate level (10 ppm), C = 2 High purity alumina substrate Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for +150 C operating conditions Very low noise and voltage coefficient (< -25 dB, 0.5 ppm/V) ADDITIONAL RESOURCES Non-inductive Laser-trimmed tolerances 0.1 % 3D Models Wraparound resistance less than 0.010 typical Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional In-lot tracking less than 5 ppm/C uniformity. They are ideal in applications requiring stringent Complete MIL-testing available in-house performance requirements. Established reliability is assured Antistatic waffle pack or tape and reel packaging available through 100 % screening and extensive environmental lo t testing. Military / aerospace / QPL CONSTRUCTION TYPICAL PERFORMANCE Resistor Film Passivation Solder ABSOLUTE Coating TCR 25 Nickel Barrier High Purity TOL. 0.1 Alumina Substrate Adhesion Layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tamelox resistor film (passivated nichrome) - Resistance Range 10 to 6.19 M - TCR: Absolute 25 ppm/C to 300 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 10 % +25 C Stability: Absolute R 0.02 % 2000 h at +70 C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V - Working Voltage 30 V to 200 V - Operating Temperature Range -55 C to +150 C - Storage Temperature Range -55 C to +150 C - Noise < - 25 dB - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C Revision: 20-Sep-2019 Document Number: 60018 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D E/H (Military M/D55342) www.vishay.com Vishay Dale Thin Film COMPONENT RATINGS RESISTANCE RANGE ( ) BY CHARACTERISTICS TOLERANCE POWER WORKING CASE SIZE RATING VOLTAGE E E H, K, L, M H, K, L, M (mW) (V) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) M55342/01 50 40 49.9 to 150K 49.9 to 150K 20 to 150K 20 to 150K M55342/02 125 40 49.9 to 301K 49.9 to 301K 20 to 301K 20 to 301K M55342/03 200 75 49.9 to 649K 49.9 to 649K 10 to 649K 10 to 649K M55342/04 150 125 49.9 to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M M55342/05 225 175 49.9 to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M M55342/06 150 50 49.9 to 475K 49.9 to 475K 10 to 475K 10 to 475K D55342/07 250 100 49.9 to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M M55342/08 800 150 49.9 to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M M55342/09 1000 200 49.9 to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M M55342/10 500 75 49.9 to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M M55342/11 50 30 49.9 to 100K 49.9 to 100K 20 to 100K 20 to 100K M55342/12 100 50 49.9 to 258K 49.9 to 261K 10 to 258K 10 to 261K Note Values listed are a guide, refer to MIL spec for value / tolerance allowance DIMENSIONS in inches D W T E L CASE SIZE TERM. L W T D E M55342/01 B 0.055 0.006 0.025 0.005 0.010 to 0.033 0.010 0.005 0.015 0.005 M55342/02 B 0.055 0.006 0.050 0.005 0.010 to 0.033 0.010 0.005 0.015 0.005 M55342/03 B 0.105 0.007 0.050 0.005 0.010 to 0.033 0.015 0.005 0.015 0.005 M55342/04 B 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 M55342/05 B 0.230 0.007 0.075 0.005 0.010 to 0.033 0.020 0.005 0.020 0.005 M55342/06 B 0.080 0.006 0.050 0.005 0.010 to 0.033 0.016 0.008 0.015 0.005 D55342/07 B 0.126 0.008 0.063 0.005 0.010 to 0.033 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 M55342/08 B 0.209 + 0.009/- 0.018 0.098 0.005 0.010 to 0.033 0.020 0.005 0.020 0.005 M55342/09 B 0.259 + 0.009/- 0.015 0.124 0.005 0.010 to 0.033 0.020 0.005 0.020 0.005 M55342/10 B 0.105 0.007 0.100 0.005 0.010 to 0.033 0.015 0.005 0.015 0.005 M55342/11 B 0.040 0.005 0.022 0.005 0.010 to 0.033 0.010 0.005 0.010 0.005 M55342/12 B 0.064 0.006 0.032 0.005 0.010 to 0.033 0.012 0.005 0.015 0.005 ENVIRONMENTAL TESTS MIL-PRF-55342 LIMITS VISHAY PERFORMANCE ENVIRONMENTAL TEST ( R ) ( R ) Thermal Shock 0.1 % 0.020 % Low Temperature Operation 0.1 % 0.025 % Short Time Overload 0.1 % 0.050 % High Temperature Exposure 0.1 % 0.009 % Resistance to Bonding 0.2 % 0.006 % Moisture Resistance 0.2 % 0.004 % TCR 25 ppm/C < 15 ppm/C Life (2000 h at + 70 C) 0.5 % 0.02 % Life (10 000 h at + 70 C) 2.0 % 0.04 % MECHANICAL SPECIFICATIONS Resistive Element Tamelox FSCM CAGE - 57489 Substrate Material Alumina Chip Terminations Solder over nickel Fused Solder Tin / lead solder alloy Revision: 20-Sep-2019 Document Number: 60018 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000