M8340105K1004GGD03 Vishay

MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ040 to RZ090, Single-In-Line, Molded SIP FEATURES Isolated, bussed and dual terminator schematics available MIL-PRF-83401 qualified 0.195 (4.95 mm) A and 0.350 (8.89 mm) C maximum seated heights Thick film resistive elements TCR available in K ( 100 ppm/C) or M ( 300 ppm/C) characteristic All device leads are hot-solder dipped Rugged molded case construction Compatible with automatic insertion equipment 100 % screen tested per group A, subgroup 1 of MIL-PRF-83401 All devices are capable of passing the MIL-STD-202, method 210, condition D Resistance to Soldering Heat test Available in tube pack STANDARD ELECTRICAL SPECIFICATIONS VISHAY POWER POWER TEMPERATURE DALE MIL RATING RATING RESISTANCE (1) (2) MIL TOLERANCE COEFFICIENT WEIGHT MODEL/ SPEC. SCHEMATIC ELEMENT PACKAGE RANGE STYLE % (-55 C to +125 C) g PIN NO/ SHEET P P 70 C 70 C ppm/C PROFILE W W 01 (C) 0.20 1.00 10 to 1M 1, 2, 5 100, 300 MSM06C RZ040 04 03 (G) 0.20 0.60 10 to 1M 1, 2, 5 100, 300 0.7 05 (H) 0.11 0.88 Consult factory 1, 2, 5 100, 300 01 (C) 0.20 1.40 10 to 1M 1, 2, 5 100, 300 MSM08C RZ050 05 03 (G) 0.20 0.80 10 to 1M 1, 2, 5 100, 300 0.9 05 (H) 0.11 1.32 Consult factory 1, 2, 5 100, 300 01 (C) 0.20 1.80 10 to 1M 1, 2, 5 100, 300 MSM10C RZ060 06 03 (G) 0.20 1.00 10 to 1M 1, 2, 5 100, 300 1.1 05 (H) 0.11 1.80 Consult factory 1, 2, 5 100, 300 01 (C) 0.12 0.60 10 to 1M 1, 2, 5 100, 300 MSM06A RZ070 07 03 (G) 0.12 0.36 10 to 1M 1, 2, 5 100, 300 0.4 05 (H) 0.07 0.60 Consult factory 1, 2, 5 100, 300 01 (C) 0.12 0.84 10 to 1M 1, 2, 5 100, 300 MSM08A RZ080 08 03 (G) 0.12 0.48 10 to 1M 1, 2, 5 100, 300 0.5 05 (H) 0.07 0.84 Consult factory 1, 2, 5 100, 300 01 (C) 0.12 1.08 10 to 1M 1, 2, 5 100, 300 MSM10A RZ090 09 03 (G) 0.12 0.60 10 to 1M 1, 2, 5 100, 300 0.6 05 (H) 0.07 1.08 Consult factory 1, 2, 5 100, 300 Notes (1) 2 % standard, 1 % and 5 % available. (2) K = 100 ppm/C M = 300 ppm/C. Revision: 10-Sep-15 Document Number: 31514 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MSM (Military M83401/04 to /09) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340107K1003GCD03 (preferred part numbering format) M 8 34 010 7 K 1 00 3 G C D 03 MIL RESISTANCE TOLERANCE SPEC SHEET CHARACTERISTIC SCHEMATIC PACKAGING STYLE VALUE CODE M83401 04 = 6 pin, C profile K = 100 ppm 3 digit significant F = 1 % C = Bussed D03 = 05 = 8 pin, C profile M = 300 ppm figure, followed G = 2 % G = Isolated Tin/lead, tube 06 = 10 pin, C profile by a multiplier J = 5 % DSL = 07 = 6 pin, A profile 10R0 = 10 Tin/lead, tube, 08 = 8 pin, A profile 3302 = 33 k single lot 09 = 10 pin, A profile 1004 = 1 M date code Historical Part Number example: M8340107K1003GC (will continue to be accepted) M83401 07 K 1003 G C D03 MIL RESISTANCE TOLERANCE SPEC SHEET CHARACTERISTIC SCHEMATIC PACKAGING STYLE VALUE CODE New Global Part Numbering: M8340104KA001GHD03 (preferred part numbering format) M 8 34 010 4 K A 00 1 G H D 03 MIL RESISTANCE TOLERANCE SPEC SHEET CHARACTERISTIC SCHEMATIC PACKAGING STYLE VALUE CODE M83401 04 = 6 pin, C profile K = 100 ppm Per std. MIL Spec F = 1 % H = Dual D03 = 05 = 8 pin, C profile M = 300 ppm (see Impedance G = 2 % terminator Tin/lead, tube 06 = 10 pin, C profile Codes table) J = 5 % DSL = 07 = 6 pin, A profile Tin/lead, tube, 08 = 8 pin, A profile single lot 09 = 10 pin, A profile date code Historical Part Number example: M8340104KA001GH (will continue to be accepted) M83401 04 K A001 G H D03 MIL RESISTANCE TOLERANCE SPEC SHEET CHARACTERISTIC SCHEMATIC PACKAGING STYLE VALUE CODE Note For additional information on packaging, refer to the Through Hole Network Packaging document (www.vishay.com/doc 31542). DIMENSIONS in inches (millimeters) A Profile C Profile 0.030 + 0.005 0.030 + 0.005 A - 0.015 - 0.015 A (0.762 + 0.127 (0.762 + 0.127 0.342 + 0.008 - 0.381) 0.187 + 0.008 - 0.381) Pin 1 - 0.010 Pin 1 - 0.010 (8.69 + 0.203 (4.75 + 0.203 - 0.254) 0.040 + 0.009 0.040 + 0.009 - 0.254) - 0.015 - 0.015 (1.02 + 0.229 (1.02 + 0.229 - 0.381) 0.135 + 0.015 - 0.381) 0.017 0.004 0.135 + 0.015 0.017 0.004 - 0.010 0.100 0.005 0.100 0.005 (0.432 0.102) - 0.010 (0.432 0.102) (3.43 + 0.381 (2.54 0.127) (2.54 0.127) (3.43 + 0.381 - 0.254) Non-Accumulative B Non-Accumulative B - 0.254) C Equals Spaces C Equal Space 0.098 max. (2.49 max.) 0.098 max. (2.49 max.) VISHAY DALE MODEL A B C 0.500 0.583 0.015 MSM06 5 (14.81 0.381) (12.70) 0.783 0.015 0.700 MSM08 7 (17.78) (19.89 0.381) 0.983 0.015 0.900 MSM10 9 (22.86) (24.97 0.381) 0.012 0.004 (0.305 0.102) 0.012 0.004 (0.305 0.102) Revision: 10-Sep-15 Document Number: 31514 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000