MSM Long Lead (Military M83401/24) www.vishay.com Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ240, Single-In-Line, Molded SIP FEATURES Isolated, bussed, and dual terminator schematics available MIL-PRF-83401 qualified 0.195 (4.95 mm) A maximum seated height Thick film resistive elements TCR available in K ( 100 ppm/C) or M ( 300 ppm/C) characteristic All device leads are hot-solder dipped Rugged molded case construction Compatible with automatic insertion equipment 100 % screen tested per group A, subgroup 1 of MIL-PRF-83401 All devices are capable of passing the MIL-STD-202, method 210, condition D Resistance to Soldering Heat test Available in tube pack STANDARD ELECTRICAL SPECIFICATIONS POWER POWER VISHAY DALE TEMPERATURE MIL RATING RATING RESISTANCE (1) (2) MODEL/ MIL TOLERANCE COEFFICIENT WEIGHT SPEC. SCHEMATIC ELEMENT PACKAGE RANGE PIN NO/ STYLE % (-55 C to +125 C) g SHEET P P 70 C 70 C PROFILE ppm/C W W MSM10A-01-S4 01 (C) 0.12 1.08 10 to 1M MSM10A-03-S2 RZ240 24 03 (G) 0.12 0.60 10 to 1M 1, 2, 5 100, 300 0.6 MSM10A-05-S3 05 (H) 0.07 1.08 Consult factory Notes DSCC has created a drawing to support the need for a 10 pin, single in line package (SIP), 0.350 maximum seated height resistor network product with an extended lead length. Vishay Dale is listed as a resource on this drawing as follows: POWER POWER TEMPERATURE MAX. DSCC RATING RATING RESISTANCE (1) (2) VISHAY DALE TOLERANCE COEFFICIENT WORKING DRAWING SCHEMATIC ELEMENT PACKAGE RANGE (1) MODEL % (-55 C to +125 C) VOLTAGE NUMBER P P 70 C 70 C ppm/C V W W MSP10C-01-S125 01 (C) 0.2 1.8 10 to 1M 92013 MSP10C-03-S154 03 (G) 0.2 1.0 10 to 1M 1, 2, 5 100 50 MSP10C-05-S122 05 (H) 0.11 1.8 Consult factory This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx DocTYPE=DSCCdwg. (1) 2 % standard, 1 % and 5 % available (2) K = 100 ppm/C M = 300 ppm/C Revision: 10-Sep-15 Document Number: 31531 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MSM Long Lead (Military M83401/24) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340124K1003GCD03 (preferred part numbering format) M 8 3 4 0 1 2 4 K 1 0 0 3 G C D 0 3 RESISTANCE MIL STYLE SPEC. SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE M83401 24 = 10 pin, K = 100 ppm 3 digit significant F = 1 % C = Bussed D03 = Tin/lead, tube A profile, M = 300 ppm figure, followed G = 2 % G = Isolated DSL = Tin/lead, tube, 0.190 leads by a multiplier J = 5 % single lot date code 10R0 = 10 3302 = 33 k 1004 = 1 M Historical Part Number: M8340124K1003GC (will continue to be accepted) M83401 24 K 1003 G C D03 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE New Global Part Numbering: M8340124KA001GHD03 (preferred part numbering format) M 8 3 4 0 1 2 4 K A 0 0 1 G H D 0 3 RESISTANCE MIL STYLE SPEC. SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE M83401 24 = 10 pin, K = 100 ppm Per Std. F = 1 % H = Dual D03 = Tin/lead, tube A profile, M = 300 ppm MIL. Spec. G = 2 % terminator DSL = Tin/lead, tube, 0.190 leads (see Impedance J = 5 % single lot date code Codes table) Historical Part Number: M8340124KA001GH (will continue to be accepted) M83401 24 K A001 G H D03 RESISTANCE MIL STYLE SPEC SHEET CHARACTERISTIC TOLERANCE SCHEMATIC PACKAGING VALUE Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542). DIMENSIONS in inches (millimeters) A Profile 0.098 max. 0.030 + 0.005 (2.49 max.) - 0.015 A (0.762 + 0.127 - 0.381) 0.187 + 0.008 Pin 1 - 0.010 (4.75 + 0.203 0.040 + 0.009 - 0.254) - 0.015 (1.02 + 0.229 - 0.381) 0.190 + 0.015 0.017 0.004 0.012 0.004 - 0.010 0.100 0.005 (0.432 0.102) (0.305 0.102) (4.83 + 0.381 (2.54 0.127) - 0.254) Non-accumulative B C equal space VISHAY DALE MODEL A B C 0.983 0.015 0.900 MSM10 9 (24.97 0.381) (22.86) TECHNICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS PARAMETER UNIT MSM SERIES Body Molded epoxy Maximum Operating Voltage V 50 Terminals Copper alloy, hot-solder dipped DC Voltage Coefficient of Resistance V < 50 ppm Solderability Per MIL-PRF-83401 eff Dielectric Strength V 200 min. AC Insulation Resistance 10 000 M Operating Temperature Range C -55 to +125 CAGE CODE: 91637 and 2799A (formerly SH903) Storage Temperature Range C -55 to +150 Revision: 10-Sep-15 Document Number: 31531 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000