193 PUR-SI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power High Ripple Current Miniaturized Snap-In FEATURES Compact design Useful life: 5000 h at 105 C > 25 years 24/7 application life at 60 C Available up to 500 V 10 % to 30 % higher ripple current than similar sized standard products Keyed polarity snap-in version available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 198 PHR-SI APPLICATIONS Solar PV inverters Higher temperature Motor controls / small drives Standard and switched mode power supplies Longer life 259 PHM-SI 193 PUR-SI Industrial air conditioning Industrial lamp driver Fig. 1 Welding / cutting / melting Uninterruptable power supply (UPS) QUICK REFERENCE DATA MARKING DESCRIPTION VALUE The capacitors are marked (where possible) with th e Nominal case size 22 x 25 to 35 x 60 following information: ( D x L in mm) Rated capacitance (in F) Rated capacitance range, C 47 F to 820 F R Tolerance code on rated capacitance, code letter in Tolerance on C 20 % R accordance with IEC 60062 (M for 20 %) Rated voltage range, U 400 V to 450 V 500 V R Rated voltage (in V) Category temperature range -40 C to 105 C-25 C to 105 C Date code (YYMM or in 2 digits according to IEC 60062) Endurance test at 105 C 2000 h Name of manufacturer Useful life at 105 C 5000 h Code for factory of origin Shelf life at 0 V, 105 C 1000 h Based on sectional specification IEC 60384-4 / EN 130300 - sign to identify the negative terminal, visible from the top and side of the capacitor Climatic category IEC 60068 40 / 105 / 56 25 / 105 / 56 Code number, at least last 8 digits 193 xxxxx Climatic category in accordance with IEC 60068 SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R U (V) R C R (F) 400 450 500 47 - - 22 x 25 56 - - 25 x 25 68 22 x 25 22 x 25 22 x 30 22 x 30 22 x 35 82 - 25 x 25 25 x 30 22 x 30 100 - 22 x 40 25 x 25 22 x 35 25 x 35 120 - 25 x 30 30 x 30 30 x 25 35 x 25 22 x 35 22 x 40 150 25 x 30 25 x 45 25 x 35 30 x 25 Revision: 09-Dec-2020 Document Number: 28458 1 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 193 PUR-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R U (V) R C R (F) 400 450 500 25 x 40 22 x 45 30 x 35 180 30 x 30 25 x 35 35 x 30 35 x 25 25 x 50 25 x 40 220 30 x 35 30 x 40 30 x 30 35 x 30 25 x 50 30 x 50 270 30 x 40 30 x 35 35 x 35 30 x 40 330 35 x 35 35 x 45 35 x 30 390 30 x 45 35 x 40 35 x 50 30 x 50 470 35 x 50 35 x 55 35 x 40 560 35 x 45 35 x 55 - 680 35 x 50 - - 820 35 x 60 - - DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN D + Terminal L + 2 max. L 10 0.1 - Terminal Bottom view + 0 5.8 mm - 1 2 0.1 (2 x) The minus terminal can be marked with a black dot or with an imprinted - sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram THREE TERMINAL SNAP-IN D 2 0.1 (2 x) 2.5 0.1 + Terminal L L + 2 max. The 10 mm spacing of the 2 pin - Terminal snap-in is used as the base layout Minus pole and a third hole is added. 10 0.1 marking The third hole is closer to the 3.3 0.1 4 0.5 negative primary hole so that Bottom view polarization is always maintained, together with added mechanical The negative terminal has TWO pins which are BOTH stability. 4.75 0.1 electrically connected Fig. 4 - Three terminal snap-in Fig. 5 - Mounting hole diagram Revision: 09-Dec-2020 Document Number: 28458 2 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000