198 PHR-SI www.vishay.com Vishay BCcomponents Aluminum Capacitors, Power High Ripple Current Snap-In FEATURES Useful life: 15 000 h at + 85 C Very high ripple current capability High reliability Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized dimensions, cylindrical aluminum case, insulated with a blue sleeve Keyed polarity version available Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 smaller longer life 057 198 157 PSM-SI dimensions PHR-SI higher ripple PUM-SI APPLICATIONS Fig. 1 Motor control and industrial systems Smoothing and filtering Standard and switched mode power supplies Energy storage in pulse systems QUICK REFERENCE DATA DESCRIPTION VALUE MARKING Nominal case size ( D x L in mm) 22 x 25 to 35 x 60 The capacitors are marked (where possible) with the Rated capacitance range following information: 56 F to 680 F (E6/E12 series), C R Rated capacitance (in F) Tolerance on C 20 % R Tolerance code on rated capacitance, code letter in Rated voltage range, U 400 V and 450 V R accordance with IEC 60062 (M for 20 %) Category temperature range - 25 C to + 85 C Rated voltage (in V) Date code (YYMM) Endurance test at 85 C 7000 h Name of manufacturer Useful life at 85 C 15 000 h Code for factory of origin Shelf life at 0 V, 85 C 1000 h - sign to identify the negative terminal, visible from the Based on sectional specification IEC 60384-4/EN 130300 top and side of the capacitor Climatic category IEC 60068 25/085/56 Code number Climatic category in accordance with IEC 60068 SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R U (V) C R R (F) 400 450 56 22 x 25 22 x 25 68 22 x 25 22 x 30 - 22 x 30 82 - 25 x 25 22 x 30 22 x 35 100 - 25 x 30 22 x 35 22 x 40 120 25 x 30 25 x 30 - 30 x 25 22 x 40 25 x 40 150 25 x 35 30 x 30 25 x 40 25 x 40 180 30 x 30 30 x 35 35 x 25 35 x 25 25 x 45 25 x 50 220 30 x 35 30 x 40 35 x 30 35 x 30 Revision: 18-Mar-13 Document Number: 28339 1 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 198 PHR-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R U (V) C R R (F) 400 450 30 x 40 30 x 45 270 35 x 30 35 x 35 30 x 45 30 x 50 330 35 x 35 35 x 40 30 x 50 35 x 45 390 35 x 40 - 470 35 x 45 35 x 50 560 35 x 50 35 x 60 680 35 x 60 35 x 60 DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN D + TERMINAL L L + 2 10 0.1 max. - TERMINAL + 0 5.8 - 1 Bottom view The minus terminal can be marked with a black dot or with an imprinted 2 0.1 (2 x) - sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram THREE TERMINAL SNAP-IN D 2 0.1 (2 x) 2.5 0.1 The 10 mm spacing of the 2 pin + TERMINAL L + 2 L snap-in is used as the base layout - TERMINAL max. and a third hole is added. 10 0.1 The third hole is closer to the 3.3 0.1 minus pole negative primary hole so that marking polarization is always maintained, 4 0.5 Bottom view together with added mechanical stability. 4.75 0.1 The negative terminal has TWO pins which are BOTH electrically connected. Fig. 4 - Three terminal snap-in Fig. 5 - Mounting hole diagram Revision: 18-Mar-13 Document Number: 28339 2 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000