MBB0207CC1214FC100 Vishay

33 3 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 www.vishay.com Vishay Beyschlag Leaded Metal Film Resistors with Established Reliability FEATURES IECQ-CECC approved to EN 140101-806, version E Established reliability, failure rate level E7 Advanced thin film technology Intrinsic sulfur resistance Single Lot Date Code Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 DESIGN SUPPORT TOOLS AVAILABLE APPLICATIONS 3D Models Military Avionics MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, and Space MBE/SMA 0414 VG06 leaded metal film resistors with established reliability are the perfect choice for all high-reliability applications typically found in military, aircraft and spacecraft electronics. These versions supplement the families of professional and precision leaded resistors MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414. TECHNICAL SPECIFICATIONS DESCRIPTION MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 DIN size 0204 0207 0414 Size code (EN/CECC style) A B D Resistance range 1 to5.11M 0 1 to 10M 0 1 to21.5M Resistance tolerance 1 % 0.1 % Temperature coefficient 50ppm/K 15 ppm/K (1) (2) Rated dissipation, P 0.4W 0.6W 1W 70 (2) Operating voltage, U AC or DC 200V 350V 500V max. RMS Permissible voltage against ambient (insulation): (2) 1 min U 300V 500V 800V ins -7 Assessed failure rate level E7 = 10 /h Quality factor, 0.1 Q -9 Failure rate, FIT < 0.1 x 10 /h observed Notes These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing ove r operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime -7 -6 -5 The failure rate level E7 (10 /h, = 0.1), corresponding to MIL Level R, is superior to level E6 (10 /h, = 0.3) or level E5 (10 /h, = 1 ) Q Q Q and thus may be used as a replacement (1) These specification details apply to the products 50 ppm/K 1 %. Please find more details for all product versions below (2) These data provide a user advantage over the ratings and requirements of EN140101-806 Revision: 27-Feb-2019 Document Number: 28768 1 For technical questions, contact: specialresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DD D MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 www.vishay.com Vishay Beyschlag TECHNICAL SPECIFICATIONS FOR PRODUCTS 50 ppm/K 1 % DESCRIPTION MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 (1) Rated dissipation, P 0.4W 0.6W 1W 70 Permissible film temperature, 155 C F max. Operating temperature range -55 C to +155 C Max. resistance change at P 70 1 to332k 1 to 1M 1 to2.43M for resistance, R/R max., after: (1) 1000h 0.5 % 0.5 % 0.4 % (1) 8000h 1 % 1 % 0.8 % Note (1) These data provide a user advantage over the ratings and requirements of EN140101-806 TECHNICAL SPECIFICATIONS FOR PRODUCTS 15 ppm/K 0.1 % DESCRIPTION MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 (1) Rated dissipation, P 0.25W 0.4W 0.65W 70 Permissible film temperature, 125 C F max. Operating temperature range -55 C to 125 C Max. resistance change at P 70 100 to221k 100 to 499k 100 to470k for resistance, R/R max., after: (1) 1000h 0.25 % 0.15 % 0.25 % 8000h 0.5 % 0.5 % 0.5 % Note (1) These data provide a user advantage over the ratings and requirements of EN140101-806 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 50 ppm/K 1 % 1 to 5.11 M E96 MBA/SMA 0204 VG06 15 ppm/K 0.1 % 100 to 221 k E192 (1) Jumper I = 3 A 10 m 0 - max. 50 ppm/K 1 % 1 to 10 M E96 MBB/SMA 0207 VG06 15 ppm/K 0.1 % 100to 499 k E192 (1) Jumper I = 5 A 10 m 0 - max. 50 ppm/K 1 % 1 to 21.5 M E96 MBE/SMA 0414 VG06 15 ppm/K 0.1 % 100 to 470 k E192 Notes Other TCR or tolerances, or combinations thereof, or resistance values from other E-series than given are not permitted in EN 140101-806 for version E products (1) The temperature coefficient of resistance (TCR) is not specified for 0 jumpers Revision: 27-Feb-2019 Document Number: 28768 2 For technical questions, contact: specialresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000