MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
www.vishay.com
Vishay Beyschlag
Precision Metal Film Leaded Resistors
FEATURES
IECQ-CECC approved according to
EN 140101-806
Superior overall stability: class 0.05
Wide precision ohmic range: 10 to 1.5 M
Radial version available for MBB/SMA 0207
Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
Test and measuring equipment
Industrial electronics
Medical electronics
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
precision leaded thin film resistors combine the proven
reliability of the professional products with an advanced
level of precision and stability. Therefore they are perfectly
suited for applications in the fields of test and measuring
equipment along with industrial and medical electronics.
TECHNICAL SPECIFICATIONS
DESCRIPTION MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414
DIN size 0204 0207 0414
CECC size A B D
Resistance range 22 to 332 k 10 to 1 M 22 to 1.5 M
Resistance tolerance 0.25 %; 0.1 %
Temperature coefficient 25 ppm/K; 15 ppm/K
Rated dissipation, P 0.25W 0.40W 0.65W
70
Operating voltage, U AC/DC 200 V 350 V 500 V
max.
(1)
Operating temperature range -55 C to +125 C
(1)
Peak permissible film temperature 125 C 125 C 125 C
Insulation voltage:
1 min; U 300V 500V 800V
ins
Continuous 75 V 75 V 75 V
-9
Failure rate: FIT 0.1 x 10 /h
observed
Notes
MB_ series has been merged with the related SMA series to form one series MB_/SMA__.
(1)
Please refer to APPLICATION INFORMATION below.
Revision: 12-Feb-16 Document Number: 28767
1
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Precision
www.vishay.com
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode Precision Standard
Climatic category -10 C / +85 C / 56 days -55 C / +125 C / 56 days
MBA/SMA 0204 0.07 W 0.25 W
Rated dissipation, P MBB/SMA 0207 0.11 W 0.40 W
70
MBE/SMA 0414 0.17 W 0.65 W
Applied maximum film temperature, 85 C 125 C
F max.
MBA/SMA 0204 100 to 100 k 100 to 100 k
1000 h 0.05 % 0.25 %
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
MBB/SMA 0207 100 to 270 k 100 to 270 k
1000 h 0.03 % 0.15 %
Max. resistance change at rated
dissipation | R/R max.|, after:
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
MBE/SMA 0414 100 to 470 k 100 to 470 k
1000 h 0.05 % 0.25 %
8000 h 0.1 % 0.5 %
225 000 h 0.3 % 1.5 %
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
(1)
TYPE TCR TOLERANCE RESISTANCE E-SERIES
0.25 % 22 to 332 k E96; E192
25 ppm/K
0.1 % 43 to 332 k E96; E192
MBA/SMA 0204
0.25 % 22 to 221 k E96; E192
15 ppm/K
0.1 % 43 to 221 k E96; E192
0.25 % 10 to 1 M E96; E192
25 ppm/K
0.1 % 10 to 1 M E96; E192
MBB/SMA 0207
0.25 % 10 to 1 M E96; E192
15 ppm/K
0.1 % 10 to 1 M E96; E192
0.25 % 22 to 1.5 M E96; E192
25 ppm/K
0.1 % 43 to 1 M E96; E192
MBE/SMA 0414
0.25 % 22 to 1 M E96; E192
15 ppm/K
0.1 % 43 to 1 M E96; E192
Notes
Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered with variant N or S.
(1)
Approval is according to EN 140101-806, version A.
Revision: 12-Feb-16 Document Number: 28767
2
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000