MCT06030C4999FP500 Vishay

MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional www.vishay.com Vishay Beyschlag Professional Thin Film Chip Resistors FEATURES Approved to EN 140401-801 Excellent overall stability: class 0.5 Professional tolerance of resistance: 0.5 % and 1 % Rated dissipation P up to 0.4 W for size 1206 70 Sulfur resistance verified according to ASTM B 809 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MCS 0402, MCT 0603, MCU 0805, and MCA 1206 professional thin film flat chip resistors are the perfect APPLICATIONS choice for most fields of modern professional electronics Automotive where reliability and stability are of major concern. Typical applications include telecommunication, medical Telecommunication equipment, high-end computer and audio / video Medical equipment electronics. Industrial equipment TECHNICAL SPECIFICATIONS DESCRIPTION MCS 0402 MCT 0603 MCU 0805 MCA 1206 Imperial size 0402 0603 0805 1206 Metric size code RR1005M RR1608M RR2012M RR3216M Resistance range 10 to 4.99 M 0 1 to 10 M 0 1 to 10 M 0 1 to 2 M 0 Resistance tolerance 1 % 0.5 % Temperature coefficient 50 ppm/K 25 ppm/K (1) Rated dissipation, P 0.100 W 0.125 W 0.200 W 0.400 W 70 Operating voltage, U AC /DC 50 V 75 V 150 V 200 V max. RMS (1) Permissible film temperature, 155 C F max. Operating temperature range -55 C to 155 C Permissible voltage against ambient (insulation): 1 min U 75 V 100 V 200 V 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION below. APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 16-Aug-16 Document Number: 28705 1 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional www.vishay.com Vishay Beyschlag MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER MCS 0402 0.063 W 0.100 W MCT 0603 0.100 W 0.125 W Rated dissipation, P 70 MCU 0805 0.125 W 0.200 W MCA 1206 0.250 W 0.400 W Operating temperature range -55 C to 125 C -55 C to 155 C Permissible film temperature, 125 C 155 C F max. MCS 0402 10 to 4.99 M 10 to 4.99 M MCT 0603 1 to 10 M 1 to 10 M MCU 0805 1 to 10 M 1 to 10 M Max. resistance change at P for resistance range, 70 MCA 1206 1 to 2 M 1 to 2 M R/R after: 1000 h 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 225 000 h 1.5 % - Note The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 1 % 10 to 4.99 M E24 E96 50 ppm/K 0.5 % 10 to 221 k E24 E192 MCS 0402 25 ppm/K 0.5 % 10 to 221 k E24 E192 Jumper, I = 0.63 A 20 m 0 - max. 1 % 1 to 10 M E24 E96 50 ppm/K 0.5 % 10 to 511 k E24 E192 MCT 0603 25 ppm/K 0.5 % 10 to 511 k E24 E192 Jumper, I = 1 A 20 m 0 - max. 1 % 1 to 10 M E24 E96 50 ppm/K 0.5 % 10 to 1.5 M E24 E192 MCU 0805 25 ppm/K 0.5 % 10 to 1.5 M E24 E192 Jumper, I = 1.5 A 20 m 0 - max. 1 % 1 to 2 M E24 E96 50 ppm/K 0.5 % 10 to 2 M E24 E192 MCA 1206 25 ppm/K 0.5 % 10 to 2 M E24 E192 Jumper, I = 2 A 20 m 0 - max. Note Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability. PACKAGING PACKAGING TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS E5 5000 MCS 0402 2 mm 180 mm/7 E0 10 000 P5 5000 180 mm/7 MCT 0603 Paper tape acc. PW 20 000 8 mm 330 mm/13 IEC 60286-3, Type 1a P5 5000 4 mm 180 mm/7 MCU 0805 PW 20 000 330 mm/13 MCA 1206 P5 5000 180 mm/7 Revision: 16-Aug-16 Document Number: 28705 2 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000